As-Built Drawings in Yuba City, CA
Laser-Scanned Floor Plans for Yuba City Buildings
Trusted by Leading Brands and Industry Leaders
What you get
Grass Valley, where ADS documented a veterinary clinic in July 2024, is the closest of our published projects to Yuba City, about 40 miles east in the foothills. That job is a good stand-in for a Sutter County commercial unit: 3,754 sq ft on one level inside a retail complex, scanned with LiDAR in a single visit and delivered in eight days as a registered point cloud, a 360° digital twin, AutoCAD and PDF sheets with the ceiling-mounted MEP integrated into the reflected ceiling plan, and a full photo record. Wendy Zhang of CURO Pet Care described the result as "precise as-built plans for our design needs." We have not yet published a project in Yuba City itself.
The deliverables for a Yuba City building, depending on scope: the 3D point cloud; the browser-based digital twin; 2D CAD in AutoCAD and PDF with floor plans, reflected ceiling plans, elevations and sections; a Revit model at LOD 200–300 for BIM workflows; and MEP and structural elements where you need them. BOMA and REBNY area calculations are available on request. Scanning is done with the Leica RTC360, Leica BLK2GO or Matterport Pro3.
How a Yuba City project runs: send the address, approximate square footage and the deliverables you want, and we quote with travel as its own line. One technician scans while the building stays open. The scans are registered, the drawings are drafted from the point cloud, you review and we revise before final delivery.
Yuba City FAQ
What does it cost?
Floor area, how much is inside (an open storage warehouse drafts faster than a finished medical office), the deliverables you pick and travel. Point cloud and 2D CAD is the entry tier; Revit adds modeling time. The quote is itemized so you can cut what you do not need.
Is it worth bringing you in from out of town?
Usually yes. The scan is one short visit, and registration, drafting and review happen off site. Travel is listed separately so you can compare it with a local tape survey.
How accurate is it?
All dimensions are read from the point cloud, so plans, ceiling plans and sections come from one measured source and agree with each other. Walls out of square and floors out of level are drawn as found.
Does the building have to close?
No. The Grass Valley clinic was a working unit while it was scanned. We work around staff and customers and can schedule outside business hours.
Will the drawings work for my permit?
Yes. Your architect or engineer uses the set as the existing-conditions base for a submittal to the Yuba City Building Division, part of the city's Development Services Department. Applications filed on or after January 1, 2026 are reviewed under the 2025 California codes.
Who owns the files?
You do. CAD, PDF, Revit and the point cloud are delivered to you and your consultants to keep.
Nearby ADS projects
Scanned by our crews in the Sierra foothills and across California:
- Veterinary Clinic Unit in Grass Valley
Grass Valley, CA · 3,754 sq ft · 2024
ADS scanned this Grass Valley clinic's walls, partitions and ceilings, recorded its veterinary prep and service areas, and placed ceiling-mounted MEP on the reflected ceiling plan for future technical upgrades. - Sepulveda - Level 2 Historic Documentation
Los Angeles, CA · 3,117 sq ft · 2026
Standard measurements would not have been enough for the structural quirks of this historic Olvera Street building, so ADS laser-scanned its second level and turned the scans into BIM models that reduced risk for the construction phase. - Commercial Building in San Diego
San Diego, CA · 26,580 sq ft · 2024
A three-story mixed-use building in the Gaslamp Quarter with a boutique hotel and ground-floor retail, surveyed for redevelopment. ADS delivered a point cloud, drone roof imagery and orthophotos, an LOD 300 Revit model, CAD drawings and a Matterport walkthrough. - Solana Beach Shopping Mall
Solana Beach, CA · 146,404 sq ft · 2025
ADS ran a Scan-to-BIM survey across all structures at this Solana Beach center and tailored the deliverables for the design team, leasing staff and developer working on its redevelopment.
Permits & governing bodies
Yuba City Building Division (Development Services Department): plan check, permits and inspections.
Applications on or after January 1, 2026 are reviewed under the 2025 California codes.
Where we work
Downtown Yuba City, Marysville, Linda, Olivehurst, Live Oak, Plumas Lake, Gridley and Sutter and Yuba counties.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: renovation, tenant improvement, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
