As-Built Drawings in Pico Rivera, CA
Pico Rivera As-Built Drawings, Measured on Site
Trusted by Leading Brands and Industry Leaders
What you get
For a Pico Rivera warehouse, storefront or house, an ADS as-built begins with a LiDAR scan and ends with drawings your architect, engineer or contractor can build from. Depending on what you order you receive a registered 3D point cloud, a 360° digital twin you can walk in a browser, 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections), a Revit model at LOD 200–300, and MEP or structural elements where your design needs them. BOMA or REBNY area calculations are available on request.
We have not yet published a Pico Rivera project. The closest work is elsewhere in Los Angeles County: 4,700 sq ft of multi-tenant suites on Silver Spur Road in Rolling Hills (2024), a 1,000 sq ft entryway and hall survey in Sherman Oaks (2025), and the 3,117 sq ft Level 2 historic documentation on Olvera Street in downtown Los Angeles (2026), where the crew worked through low light and dismantled rooms and reproduced out-of-square walls and uneven floors directly from the point cloud. Further south, a 26,580 sq ft commercial building in San Diego (2024) and the 146,404 sq ft Solana Beach Shopping Mall (2025) show the same workflow at larger scale.
How a Pico Rivera project runs: send the address, approximate square footage and the deliverables you want, and we return an itemized quote with travel on its own line. A technician scans on a day you choose while the building stays in use. The scans are registered into a single point cloud, the drawings are drafted from it, and you review the set before final delivery.
Pico Rivera FAQ
What does it cost?
Three things set the price: floor area, how much is in the space (an empty shell is quicker to draft than a fitted-out store or a plant floor full of equipment) and which deliverables you order. Travel is a separate line. Point cloud plus 2D CAD is the base tier; Revit adds modeling time. Quotes are itemized so you can remove what you do not need.
Is it worth bringing you in from out of town?
Usually yes. Scanning is a matter of hours, so travel stays a small part of the total, and the drafting that makes up most of the cost is done the same way wherever the building is.
How accurate is it?
We scan with Leica RTC360 and BLK2GO scanners and Matterport Pro3 and draft from the registered point cloud, not from tape measurements or old plans. Columns, dock doors and mezzanines are drawn where the scanner found them.
Does the building have to close?
No. We work around staff, forklifts and customers, and can scan after hours if the floor is too busy during the day.
Will the drawings work for my permit?
Yes. They are prepared as the existing-conditions base for the submittal your architect or engineer files with the City of Pico Rivera Building Division at 6615 Passons Boulevard. Applications filed on or after January 1, 2026 are reviewed under the 2025 California codes.
Who owns the files?
You do. CAD, PDF, Revit and the point cloud go to you and your consultants.
Nearby ADS projects
Scanned by our crews in Los Angeles and San Diego counties:
- Multi-Tenant Suites, Silver Spur Road
Rolling Hills Estates, CA · 4,700 sq ft · 2024
ADS turned LiDAR scans of both suites and their shared exterior into Revit and CAD deliverables, covering walls, ceilings and MEP, with annotations set up for architectural and permitting needs. - Sherman Oaks Entryway & Hall Survey
Sherman Oaks, CA · 1,000 sq ft · 2025
Secondary entrances and hallways were the focus of this survey of a split-level hillside home known for its mid-century and contemporary design. ADS used a Matterport Pro3 to give the renovation team detailed dimensional data for architectural decisions. - Sepulveda - Level 2 Historic Documentation
Los Angeles, CA · 3,117 sq ft · 2026
Architects preparing upcoming renovations on this 3,117 sq ft institutional building's second floor received a 2D CAD floor plan, a reflected ceiling plan, interior elevations, architectural schedules and a Revit model for 3D visualization. - Commercial Building in San Diego
San Diego, CA · 26,580 sq ft · 2024
A three-story mixed-use building in the Gaslamp Quarter with a boutique hotel and ground-floor retail, surveyed for redevelopment. ADS delivered a point cloud, drone roof imagery and orthophotos, an LOD 300 Revit model, CAD drawings and a Matterport walkthrough. - Solana Beach Shopping Mall
Solana Beach, CA · 146,404 sq ft · 2025
Blending aerial and ground scans gave consistent coverage of this shopping center's indoor and outdoor zones. Remote walkthroughs kept the project moving without disrupting active tenants.
Permits & governing bodies
City of Pico Rivera Building Division, 6615 Passons Boulevard, issues permits for tenant improvements, alterations, new construction and residential work and takes inspection requests through its online portal.
Applications filed on or after January 1, 2026 are reviewed under the 2025 California Building Standards Code.
Where we work
Pico Rivera, Whittier, Downey, Montebello, Santa Fe Springs, Norwalk, Commerce, Bell Gardens and the Gateway Cities.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance or facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
