As-Built Drawings in Monterey Park, CA
Monterey Park Floor Plans You Can Design and Permit From
Trusted by Leading Brands and Industry Leaders
What you get
When a Monterey Park building needs drawings that match what is actually there, ADS scans it with LiDAR and drafts from the scan. Depending on scope you receive a registered 3D point cloud, a 360° digital twin you can walk through online, 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections), a Revit model at LOD 200–300, and MEP or structural elements where they matter to the job. BOMA or REBNY area calculations are available on request.
We have not yet published a Monterey Park project. The nearest is a few miles west on Olvera Street in downtown Los Angeles: the 3,117 sq ft second floor of an institutional building, scanned in May 2026 with Leica equipment and delivered as a Revit model plus CAD floor plan, reflected ceiling plan, interior elevations and schedules. As added value the crew also documented an unplanned technical room and handed over its full point cloud. Our Sherman Oaks and Rolling Hills surveys and our San Diego County work are listed below.
How a Monterey Park project runs: you send the address, approximate square footage and deliverables; we quote, itemized, with travel as a separate line since no ADS crew is based in Los Angeles County. The scan is done while the building operates. We register the scans into one point cloud, draft the drawings, and you review them before final delivery.
Monterey Park FAQ
What does it cost?
Floor area, interior complexity, the deliverables you choose and travel. The entry tier is point cloud plus 2D CAD; a Revit model adds drafting time. Each quote is itemized.
Is it worth bringing you in from out of town?
For most commercial and multi-unit buildings, yes: a single scan visit captures the whole property, and the travel line is modest compared with repeat measuring trips.
How accurate is it?
Our Leica RTC360 and BLK2GO scanners and Matterport Pro3 produce the point cloud, and the drawings are traced from it, so every dimension is measured rather than assumed.
Does the building have to close?
No. Restaurants, stores, clinics and offices stay open while we scan; after-hours visits can be arranged.
Will the drawings work for my permit?
Yes. Your architect or engineer submits through the City of Monterey Park Building and Safety Division's One Stop Building Permit Center at 320 W. Newmark Avenue and tracks plan check and inspections in the city's Citizen Access portal; applications filed on or after January 1, 2026 are reviewed under the 2025 California codes. Our drawings give that submittal measured existing conditions.
Who owns the files?
You do. CAD, PDF, Revit and the point cloud belong to you and your consultants.
Nearby ADS projects
Scanned by our crews across Los Angeles and San Diego counties:
- Sepulveda - Level 2 Historic Documentation
Los Angeles, CA · 3,117 sq ft · 2026
During the Level 2 survey, ADS also scanned an unplanned technical room and handed over its full point cloud. Coordinated Revit, CAD and PDF documentation gave the architects a base for renovation planning. - Sherman Oaks Entryway & Hall Survey
Sherman Oaks, CA · 1,000 sq ft · 2025
ADS documented the entryways and halls of this private residence, modeling exterior elevations and transition zones and preparing the point cloud for use in Revit and AutoCAD. - Multi-Tenant Suites, Silver Spur Road
Rolling Hills Estates, CA · 4,700 sq ft · 2024
ADS turned LiDAR scans of both suites and their shared exterior into Revit and CAD deliverables, covering walls, ceilings and MEP, with annotations set up for architectural and permitting needs. - Commercial Building in San Diego
San Diego, CA · 26,580 sq ft · 2024
ADS combined LiDAR and aerial photogrammetry to document this 26,580 sq ft Gaslamp Quarter building, producing BIM and CAD outputs and a Matterport tour that let stakeholders review it off site. - Solana Beach Shopping Mall
Solana Beach, CA · 146,404 sq ft · 2025
ADS ran a Scan-to-BIM survey across all structures at this Solana Beach center and tailored the deliverables for the design team, leasing staff and developer working on its redevelopment.
Permits & governing bodies
City of Monterey Park Building and Safety Division · One Stop Building Permit Center, 320 W. Newmark Avenue · plan check status and inspections through the Citizen Access portal
Applications filed on or after January 1, 2026 are reviewed under the 2025 California Building Standards Code
Where we work
Monterey Park, Alhambra, San Gabriel, Rosemead, Montebello, East Los Angeles, South Pasadena and the west San Gabriel Valley.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
