As-Built Drawings in Inglewood, CA
Inglewood As-Built Drawings, Measured on Site
Trusted by Leading Brands and Industry Leaders
What you get
Every ADS as-built in Inglewood is drafted from a LiDAR scan, so the drawings reflect the building as it stands today. Depending on scope you receive a registered 3D point cloud, a 360° digital twin that opens in a browser, 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections), a Revit model at LOD 200–300, and MEP or structural elements where needed. BOMA or REBNY area calculations are available on request.
We have not yet published an Inglewood project. The nearest work is in downtown Los Angeles, where in 2026 we documented the 3,117 sq ft second floor of a historic institutional building on Olvera Street, drawing its non-orthogonal walls and uneven floors directly from the point cloud and delivering Revit, CAD and PDF sets. In the South Bay we scanned 4,700 sq ft of multi-tenant suites on Silver Spur Road in Rolling Hills (2024), and in the Valley a 1,000 sq ft entryway and hall in Sherman Oaks (2025). In San Diego County we documented the 146,404 sq ft Solana Beach Shopping Mall (2025) and a 26,580 sq ft commercial building in San Diego (2024).
How an Inglewood project runs: send the address, approximate square footage and the deliverables you need, and we return an itemized quote with travel on its own line. A technician scans the building while it stays open. The scans are registered into one point cloud, the drawings are drafted from it, and you review the set before final delivery.
Inglewood FAQ
What does it cost?
The price is driven by floor area, how much is in the space, the deliverables you choose and travel. Point cloud plus 2D CAD is the lowest tier; a Revit model adds drafting time. Each quote is itemized.
Is it worth bringing you in from out of town?
Usually, yes. Inglewood is close to our other Los Angeles County work, travel is one line on the quote, and the scan takes hours. The drafting that follows costs the same wherever the building is.
How accurate is it?
We capture with Leica RTC360 and BLK2GO scanners and the Matterport Pro3 and draw from the point cloud rather than from tape measurements. Walls that are out of square stay out of square in the drawing.
Does the building have to close?
No. We scan around staff, tenants and customers, and after-hours visits can be arranged.
Will the drawings work for my permit?
Yes. The set is prepared as the existing-conditions base your architect or engineer submits to your city's building department. Applications filed on or after January 1, 2026 are reviewed under the 2025 California codes.
Who owns the files?
You do. CAD, PDF, Revit and the point cloud are delivered to you and your consultants.
Nearby ADS projects
Scanned by our crews in Los Angeles County and San Diego County:
- Sepulveda - Level 2 Historic Documentation
Los Angeles, CA · 3,117 sq ft · 2026
During the Level 2 survey, ADS also scanned an unplanned technical room and handed over its full point cloud. Coordinated Revit, CAD and PDF documentation gave the architects a base for renovation planning. - Multi-Tenant Suites, Silver Spur Road
Rolling Hills Estates, CA · 4,700 sq ft · 2024
A layout balancing accessibility and privacy defined this 4,700 sq ft suite property, documented as a base for renovation and technical coordination. ADS handed over AutoCAD and PDF drawings, a point cloud, a 360° digital twin and annotated site photos. - Sherman Oaks Entryway & Hall Survey
Sherman Oaks, CA · 1,000 sq ft · 2025
Steep terrain and split-level architecture at this Sherman Oaks home meant aligning scans across elevation shifts and several entry points. Facade heights and openings were captured for the exterior elevations. - Solana Beach Shopping Mall
Solana Beach, CA · 146,404 sq ft · 2025
Revitalizing the tenant mix around new lifestyle and wellness concepts drove the modernization of this coastal Solana Beach complex. ADS documented existing site conditions so architectural upgrades, tenant coordination and redevelopment could proceed from reliable data. - Commercial Building in San Diego
San Diego, CA · 26,580 sq ft · 2024
A three-story mixed-use building in the Gaslamp Quarter with a boutique hotel and ground-floor retail, surveyed for redevelopment. ADS delivered a point cloud, drone roof imagery and orthophotos, an LOD 300 Revit model, CAD drawings and a Matterport walkthrough.
Permits & governing bodies
Permit applications for Inglewood buildings go through the city's building department; your design professional handles the submittal.
Applications filed on or after January 1, 2026 are reviewed under the 2025 California Building Standards Code.
Where we work
Inglewood, Hawthorne, Lennox, Westchester, El Segundo, Culver City, Ladera Heights, View Park and the surrounding Westside and South Bay.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance or facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
