As-Built Drawings in Oakland Park, FL
Oakland Park Floor Plans You Can Design and Permit From
Trusted by Leading Brands and Industry Leaders
What you get
Light-industrial bays, showrooms and small offices are exactly the kind of building a measured as-built pays for itself on. ADS laser scans the property and delivers a registered 3D point cloud, a 360° digital twin, 2D CAD floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF, and a Revit model at LOD 200–300 when your architect works in BIM. We document exposed MEP and structure where scoped and produce BOMA or REBNY area calculations on request.
We have not yet published an Oakland Park project. The nearest is Gulfstream Mall in Hallandale Beach, 506,000 sq ft, documented in 2021. The 15,000 sq ft Commercial Warehouse in North Miami, scanned in May 2025, is the closest match for the industrial stock in Oakland Park. In Miami we captured the 126,500 sq ft Office Building in the Flagler District with a Leica RTC360, and on Miami Beach the 28,405 sq ft National Hotel in August 2022.
How an Oakland Park project runs: you send the address, approximate square footage and the deliverables you need; we return an itemized quote. Our Miami office at 1110 Brickell Ave is the closest ADS base, and any travel is a line of its own. On scan day the technician works through the building while it stays open; the scans are registered into one point cloud, the drawings are drafted from it, and you review the set before final delivery.
Oakland Park FAQ
What does it cost?
Floor area, how busy the interior is, the deliverables you need and travel. Point cloud plus 2D CAD is the lowest tier; Revit modeling costs more drafting time. The quote is itemized so you can trim it.
Is it worth bringing you in from out of town?
Oakland Park is a short run from our Miami office and from the Hallandale Beach and North Miami projects listed below, so travel is a small line, not a deciding factor.
How accurate is it?
We scan with Leica RTC360 and BLK2GO scanners and the Matterport Pro3, and we draft from the point cloud, so clear heights, column spacing and wall positions are measured rather than assumed.
Does the building have to close?
No. Warehouses, showrooms and offices keep operating; we scan around forklifts and customers alike and can come after hours.
Will the drawings work for my permit?
Yes. Your architect or engineer uses the set as the existing-conditions base for the submittal to the City of Oakland Park Building & Permitting Services Division, in the Sky South Building at 1100 Park Lane East. Across Florida, condominium and co-op buildings three stories or taller are subject to milestone inspections under Florida Statutes 553.899, for which an accurate structural record is useful groundwork.
Who owns the files?
You do. Point cloud, CAD, PDF and Revit files go to you and your consultants.
Nearby ADS projects
Scanned by our crews in Broward and Miami-Dade counties:
- Gulfstream Mall
Hallandale Beach, FL · 506,000 sq ft · 2021
At this scale, ground scanning alone would not cover the property, so aerial and terrestrial data were merged. Leasing teams got a virtual walkthrough for remote access, and architects received CAD and BIM outputs. - Commercial Warehouse in North Miami
North Miami, FL · 15,000 sq ft · 2025
Vehicle entry points and turning radii were recorded at this North Miami warehouse to help plan logistics routes. Lighting, HVAC and sprinkler layouts were mapped onto the ceiling plan, and phased scanning covered the full site. - Office Building in Flagler District
Miami, FL · 126,500 sq ft · 2021
Scanning and modeling for this large downtown property were completed within 15 business days. The facade consultants received AutoCAD elevations of every side, and the client got slab plans for each level, garage floors included. - National Hotel in Miami Beach
Miami Beach, FL · 28,405 sq ft · 2022
For this historic hotel's renovation, the team laser-scanned interior and exterior spaces and ran a Scan-to-BIM workflow to an LOD 200 Revit model. Dense mechanical and service areas in the basement were captured with minimal disruption.
Permits & governing bodies
City of Oakland Park Building & Permitting Services Division, Sky South Building, 1100 Park Lane East, 1st Floor – permits, plan review and inspections under the Florida Building Code.
Florida Statutes 553.899 – milestone structural inspections for condominium and co-op buildings three stories or taller.
Where we work
Oakland Park, Fort Lauderdale, Wilton Manors, Lauderdale Lakes, Lauderhill, Pompano Beach, Lauderdale-by-the-Sea and Tamarac.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
