As-Built Drawings in Clifton, NJ
Accurate As-Built Drawings for Clifton
Trusted by Leading Brands and Industry Leaders
What you get
Clifton has the kind of building stock that outlives its paperwork: strip retail along the highways, light industrial buildings, two-family houses and mid-century offices. An ADS as-built replaces the missing or wrong drawings with a measured set. A technician scans the building with a Leica RTC360, Leica BLK2GO or Matterport Pro3, and everything we deliver is drafted from that scan.
You can receive, depending on scope, a registered 3D point cloud; a 360° digital twin you can open in a browser; 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations, sections); a Revit model at LOD 200–300; MEP and structural elements where scoped; and BOMA or REBNY area calculations on request.
We have not yet published a Clifton or New Jersey project. The nearest are in New York: a 2,500 sq ft office suite in Manhattan (July 2024), the 2,590 sq ft Russian Nails salon in Midtown South (2024) and a 7,788 sq ft beachfront residence in Kings Point on Long Island (August 2025), all listed below.
How a Clifton project runs: send the address, approximate square footage and the deliverables you want; we return an itemized quote with travel on its own line, because we do not have a crew based in Clifton. On scan day the building stays open. The scans are registered into one point cloud, the drawings are drafted from it, and you review the set before we finalize it.
Clifton FAQ
What does it cost?
The quote reflects floor area, the amount of detail in the space, which deliverables you pick and travel. Point cloud and 2D CAD is the lowest tier; Revit adds drafting hours. Everything is itemized.
Is it worth bringing you in from out of town?
Yes for nearly every commercial building. Our nearest projects are in Manhattan, the scan takes hours rather than days, and travel is a small share of a set you will reuse for years.
How accurate is it?
Every dimension comes from a registered point cloud captured with Leica RTC360, Leica BLK2GO or Matterport Pro3 scanners. We do not scale from old drawings or fill gaps with a tape.
Does the building have to close?
No. Stores, offices and warehouses stay open while we scan, and we work around staff or come after hours.
Will the drawings work for my permit?
Yes. Your architect or engineer uses the set as the existing-conditions base for a renovation or tenant-improvement submittal to Clifton's local construction office, which, like every New Jersey municipality, administers the state Uniform Construction Code. They handle the filing; we make sure the existing conditions in it are right.
Who owns the files?
You do. CAD, PDF, Revit and the point cloud are delivered to you and your consultants.
Nearby ADS projects
Scanned by our crews in Manhattan and on Long Island:
- Office Suite in Manhattan
New York, NY · 2,500 sq ft · 2024
Galleries, studios and shops surrounded the multi-story SoHo building that held this office suite. ADS ran a full interior LiDAR survey of its open layout to support architectural upgrades, space optimization and future renovation planning. - Russian Nails Salon, Midtown South
Manhattan, NY · 2,590 sq ft · 2024
High accuracy expectations for space planning led ADS to capture this Midtown South salon's interior with a Matterport Pro3. The delivered package held high-density point cloud data, as-built 2D CAD drawings and a virtual Matterport walkthrough. - Kings Point Beachfront Residence
Kings Point, NY · 7,788 sq ft · 2025
A three-level beachfront main house and pool house totaling 7,788 sq ft, documented for renovation. In a 10-day LiDAR survey, ADS scanned interiors and exteriors and delivered a point cloud, digital twin, LOD 300 Revit model and CAD/PDF sets.
Permits & governing bodies
Construction permits in Clifton are issued by the city's construction office under the New Jersey Uniform Construction Code; your architect or engineer files the submittal and we supply the existing-conditions drawings behind it.
Where we work
Downtown Clifton, Botany Village, Allwood, Richfield, Athenia, Passaic, Paterson, Nutley, Montclair and Passaic County.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: renovation, tenant improvement, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
