As-Built Drawings in Round Rock, TX
Round Rock Floor Plans You Can Design and Permit From
Trusted by Leading Brands and Industry Leaders
What you get
An as-built from ADS is a measured record of your Round Rock building, not a redraw of whatever plans were on file. A technician scans the space with LiDAR, the scans are registered into one point cloud, and everything else is drafted from it: 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections), a Revit model at LOD 200–300 when your team works in BIM, a 360° digital twin you can open in a browser, and MEP and structural elements wherever they are scoped. The point cloud itself is delivered too. BOMA or REBNY area calculations are available on request.
We have not yet published a Round Rock or Austin-area project. Our nearest Texas work is in Dallas: the 2,798 sq ft James Perse store at 3337 N Fitzhugh Ave and a 4,635 sq ft single-level brick and wood home in Hillcrest, both scanned in spring 2025. In the Panhandle we documented the 8,200 sq ft Brown Subaru dealership in Amarillo with a Leica RTC360 in November 2024.
How a Round Rock project runs: send the address, approximate square footage and the deliverables you want. We quote the job with travel as a separate line. On scan day the building stays open while the technician works; registration and drafting follow, and you review the set before we issue final files.
Round Rock FAQ
What does it cost?
Four things drive it: floor area, how much is inside the space, which deliverables you order and travel. A tilt-wall shell along I-35 costs less to document than a finished medical suite. Point cloud plus 2D CAD is the base; Revit adds drafting time. Quotes are itemized.
Is it worth bringing you in from out of town?
Usually. The site visit is the shortest part of an as-built; registration and drafting happen afterwards wherever the drafters sit. Travel is a visible line on the quote, so you can judge it against a local tape-measure survey.
How accurate is it?
Dimensions are taken from a point cloud captured with Leica RTC360, Leica BLK2GO or Matterport Pro3 scanners rather than measured by hand, so the drawings reflect the building as it stands.
Does the building have to close?
No. Scanning is non-contact and the technician moves around staff and customers. Offices, shops, clinics and homes stay in use.
Will the drawings work for my permit?
Yes. Round Rock's Planning and Development Services department handles building permits and inspections, including commercial permits and single-family remodels, through its online Permit Portal; your architect or engineer submits using our set as the existing-conditions base.
Who owns the files?
You do. CAD, PDF, Revit and the point cloud are delivered to you and your consultants.
Nearby ADS projects
Scanned by our crews elsewhere in Texas:
- James Perse, 3337 N Fitzhugh Ave
Dallas, TX · 2,798 sq ft · 2025
A 2,798 sq ft corner-lot former pet store being converted into a James Perse boutique. ADS surveyed architecture and MEP for design and permitting, delivering a point cloud, 360° digital twin, LOD 300 Revit model and AutoCAD and PDF sheets. - Hillcrest Single-Level Brick & Wood Home
Dallas, TX · 4,635 sq ft · 2025
ADS documented the granite, wood and exposed brickwork of this brick-and-wood home in detail, along with the surrounding vegetation, and structured the high-density laser data into a coordinated Revit model. - Brown Subaru
Amarillo, TX · 8,200 sq ft · 2024
ADS combined a Leica RTC360 and a Matterport Pro3 to capture this 8,200 sq ft Brown Subaru building, then drafted in AutoCAD and Revit. The high-density point cloud recorded architectural detail, and the walkthrough added project visualization.
Permits & governing bodies
City of Round Rock Planning and Development Services, Building Inspection division, 301 W Bagdad Ave, Ste 100 – building permits are applied for through the city's online Permit Portal.
Where we work
Round Rock, Pflugerville, Georgetown, Hutto, Cedar Park, Leander, Brushy Creek and north Austin.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant finish-out, renovation, addition, lease plan, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
