As-Built Drawings in Rock Hill, SC
Laser-Scanned Floor Plans for Rock Hill Buildings
Trusted by Leading Brands and Industry Leaders
What you get
Rock Hill sits on the South Carolina side of the Charlotte region, and our closest published work is right across the line in Uptown Charlotte. What ADS delivers there, and in Rock Hill, is an as-built set built from a laser scan: a registered 3D point cloud captured with a Leica RTC360, Leica BLK2GO or Matterport Pro3; 2D AutoCAD and PDF drawings covering floor plans, reflected ceiling plans, elevations and sections; a Revit model at LOD 200–300 when your consultants work in BIM; and a 360° digital twin for checking conditions without another site visit. Exposed MEP and structural elements are picked up when scoped, and BOMA/REBNY area calculations can be added.
We have not yet published a Rock Hill project. Gallery House in Charlotte, NC is the nearest: 10,443 sq ft on three levels in the North Tryon arts district, scanned in February 2025, delivered as a point cloud, interior and exterior photo documentation, an LOD 300 Revit model and a virtual walkthrough. Further afield in the Carolinas and Georgia we documented a 9,110 sq ft home in Banner Elk, NC (2024), the Fendi boutique at Phipps Plaza, Atlanta (5,132 sq ft, two suites combined, 2022) and Lucky Goat Coffee in Flowery Branch, GA (1,838 sq ft, exposed beams and MEP, 2024).
How a Rock Hill project runs: quote from your address, square footage and deliverables, with travel on its own line since we have no local crew; one scan visit while the building stays in use; registration of the scans; drafting; a review round with you; final delivery.
Rock Hill FAQ
What does it cost?
It comes down to area, complexity and deliverables. An open warehouse floor documents faster than a finished restaurant or clinic; point cloud and 2D CAD is the base tier, and a Revit model adds modeling hours. Travel to Rock Hill is listed separately on the quote.
Is it worth bringing you in from out of town?
Yes when the job is a whole building, an upfit of any size or several properties, because a single scan visit records everything and later questions are answered from the point cloud. For a single small room we will say if it is not.
How accurate is it?
Dimensions come straight from the registered point cloud, which is what the scanner measured, not what an old plan assumed. We state the tolerance for your deliverable set when we quote.
Does the building have to close?
No. Businesses stay open and homes stay occupied; we work around people and can scan after hours.
Will the drawings work for my permit?
Yes. Your architect or engineer submits the set as the existing-conditions base. In Rock Hill, commercial and residential building permits, including interior upfits, are handled by the City of Rock Hill Planning and Development department's Permits & Inspections division.
Who owns the files?
You do. Point cloud, CAD, PDF and Revit files are delivered to you and your consultants.
Nearby ADS projects
Scanned by our crews in the Charlotte region, the Carolinas and Georgia:
- Gallery House in Charlotte
Charlotte, NC · 10,443 sq ft · 2025
ADS scanned the Gallery House interiors at high resolution and interpreted facade and roof conditions through CAD modeling, producing an existing-conditions Revit model plus interior and exterior photos for the renovation. - Single-Family Home in Banner Elk
Banner Elk, NC · 9,110 sq ft · 2024
A 9,110 sq ft mountain estate with steep rooflines, exposed beams and detailed facades, surveyed for renovation planning. ADS combined LiDAR with drone capture and delivered a point cloud, orthophotos, an LOD 300 Revit model and AutoCAD drawings. - Fendi, Phipps Plaza
Atlanta, GA · 5,132 sq ft · 2022
At Atlanta's Phipps Plaza, ADS scanned two neighboring suites that were to be merged for a new Fendi store, then modeled mechanical, electrical and structural systems throughout both so the combined layout could be redesigned. - Lucky Goat Coffee, Stonebridge Village
Flowery Branch, GA · 1,838 sq ft · 2024
Tall ceilings with exposed beams, ducts and lighting meant the overhead MEP in this coffee shop had to be modeled exactly. The CAD drawings lay out customer, service and kitchenette zones for the renovation.
Permits & governing bodies
City of Rock Hill Planning and Development, Permits & Inspections – commercial and residential building permits, interior upfits and trade permits for addresses inside city limits.
Addresses outside the city are permitted by the county.
Where we work
Old Town and Downtown Rock Hill, Knowledge Park, the Winthrop University area, Riverwalk, Dave Lyle Boulevard, Fort Mill, Tega Cay, Lake Wylie, York, Clover, Chester and the south Charlotte suburbs.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: renovation, interior upfit, adaptive reuse, lease plan, insurance or facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
