As-Built Drawings in Midwest City, OK
Midwest City Floor Plans You Can Design and Permit From
Trusted by Leading Brands and Industry Leaders
What you get
For a building in Midwest City, ADS produces the as-built set from a laser scan taken on site. Depending on scope you receive a registered 3D point cloud, a 360° digital twin you can open in a browser, 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections), a Revit model at LOD 200–300, and MEP or structural elements where you need them. BOMA and REBNY area calculations are available on request.
We have not yet published a project in Midwest City or the Oklahoma City metro. The nearest published work is in Texas: the 2,798 sq ft James Perse store on N Fitzhugh Avenue in Dallas (2025), a 4,635 sq ft single-level brick and wood home in Dallas's Hillcrest area (2025), and the 8,200 sq ft Brown Subaru dealership in Amarillo (2024). A boutique, a house and a car dealership are different jobs, and the same scan-to-drawing process handled each.
How a Midwest City project runs: send the address, approximate square footage and the deliverables you want, and we return an itemized quote with travel to central Oklahoma listed as its own line, as we do not keep a crew here. On scan day the building stays open while the technician captures it. The scans are registered into one point cloud, drafted into your deliverables, and sent to you for review before we issue the final files.
Midwest City FAQ
What does it cost?
The quote follows floor area, the amount of detail in the space, the deliverables you want and travel. Point cloud and 2D CAD is the base tier; a Revit model adds drafting time. Each item is listed on its own line.
Is it worth bringing you in from out of town?
For one small room, no. For a hangar, a strip center, a church or a renovation an architect will design from, a scan-based set usually costs less than the drawing corrections it prevents, and travel is a small share of the total.
How accurate is it?
We capture with Leica RTC360 and BLK2GO scanners and the Matterport Pro3, then draft every dimension from the point cloud. Nothing is assumed between measured points.
Does the building have to close?
No. Scanning is non-contact and quiet; staff and customers can stay. After-hours scans are available for busy floors.
Will the drawings work for my permit?
Yes, as the existing-conditions base. In Midwest City, building and trade permits are issued by the Building Permits & Inspections Division of the Community Development Department at City Hall. Your architect or engineer prepares the submittal; our drawings make the existing conditions in it reliable.
Who owns the files?
You do. CAD, PDF, Revit and the point cloud are delivered to you and the consultants you name.
Nearby ADS projects
Scanned by our crews in Texas:
- James Perse, 3337 N Fitzhugh Ave
Dallas, TX · 2,798 sq ft · 2025
Mapping systems and panels was the core MEP task at this 2,798 sq ft property. ADS delivered a LiDAR point cloud, an LOD 300 Revit model with 3D views, AutoCAD drawings, annotated PDF sheets and a 360° digital twin. - Hillcrest Single-Level Brick & Wood Home
Dallas, TX · 4,635 sq ft · 2025
Lighting, alarm and speaker systems were all represented in the as-built model of this 4,635 sq ft Dallas home, which ADS exported to IFC and paired with 3D views and a high-resolution point cloud for future planning. - Brown Subaru
Amarillo, TX · 8,200 sq ft · 2024
For the Brown Subaru Service Center renovation, ADS ran a terrestrial LiDAR survey of the structural and architectural conditions, analyzed the existing structure, and drew the as-built set in AutoCAD and Revit.
Permits & governing bodies
Midwest City Community Development Department, Building Permits & Inspections Division – building and trade permits and inspections (midwestcityok.org).
Where we work
Midwest City, Del City, Oklahoma City, Choctaw, Nicoma Park, Moore, Edmond and the rest of Oklahoma County.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
