As-Built Drawings in League City, TX
Laser-Scanned Floor Plans for League City Buildings
Trusted by Leading Brands and Industry Leaders
What you get
When an architect in League City asks for existing-conditions drawings, ADS answers with a laser scan rather than a tape survey. A technician captures the building with a Leica RTC360, Leica BLK2GO or Matterport Pro3, the scans are registered into one 3D point cloud, and the deliverables you ordered are drafted from it: 2D CAD floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF; a Revit model at LOD 200–300; a 360° digital twin you can open in a browser; and MEP or structural elements where scoped. BOMA or REBNY area calculations are available on request.
We have not yet published a project in League City or the Houston–Galveston area. Our published Texas work is in Dallas, where we scanned the James Perse store at 3337 N Fitzhugh Avenue (2,798 sq ft) in April 2025 and a 4,635 sq ft single-level brick and wood home in Hillcrest the same spring, and in Amarillo, where we documented the 8,200 sq ft Brown Subaru dealership with the Leica RTC360 in November 2024.
How a League City project runs: send the address, approximate square footage and the deliverables you want, and we return an itemized quote with travel as its own line. Scanning is normally a single visit with the building in use. We register the scans, draft the set, send it for your review and revise before final delivery.
League City FAQ
What does it cost?
Floor area, how much detail the space holds, which deliverables you order and travel. Point cloud with 2D CAD is the base tier and Revit is priced on top. Quotes are itemized so you can remove anything you do not need.
Is it worth bringing you in from out of town?
For most projects, yes. Travel to League City is one line on the quote, the scan is a single visit, and registration, drafting and revisions are handled remotely for every client, local or not.
How accurate is it?
Dimensions come from the registered point cloud, millions of measured points per scan position, rather than from a tape or the builder's plans. Walls, openings and ceiling heights are recorded as they exist.
Does the building have to close?
No. Homes, offices, clinics and stores stay occupied while we scan. We work around people and furniture, and early or late visits can be arranged.
Will the drawings work for my permit?
Yes. The set is prepared as the existing-conditions base for the application your architect, engineer or contractor files with the city's building department, which reviews plans and inspects the work. Your design professional handles the submittal; our job is to make sure the existing conditions in it are correct.
Who owns the files?
You do. Point cloud, CAD, PDF and Revit files are delivered to you and your consultants.
Nearby ADS projects
Scanned by our crews in Dallas and the Texas Panhandle:
- James Perse, 3337 N Fitzhugh Ave
Dallas, TX · 2,798 sq ft · 2025
To support permitting and the change to retail use, ADS scanned this Dallas corner property and produced architectural sheets, with the facade and signage areas shown clearly for the street-facing design. - Hillcrest Single-Level Brick & Wood Home
Dallas, TX · 4,635 sq ft · 2025
Expansive windows framed the custom woodwork, steel and granite of this single-story Preston Hollow residence. A full LiDAR survey inside and out also recorded the surrounding vegetation and unique textures to support precise renovation planning. - Brown Subaru
Amarillo, TX · 8,200 sq ft · 2024
For the Brown Subaru Service Center renovation, ADS ran a terrestrial LiDAR survey of the structural and architectural conditions, analyzed the existing structure, and drew the as-built set in AutoCAD and Revit.
Permits & governing bodies
Building permits inside the city limits go through the City of League City's building department, which reviews plans and inspects remodels and new construction. Your architect or contractor files the application; we provide the existing-conditions drawings it is based on.
Where we work
League City, Clear Lake Shores, Kemah, Seabrook, Webster, Friendswood, Dickinson, Nassau Bay, Clear Lake, Pearland, Texas City and Galveston.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
