As-Built Drawings in Jonesboro, AR
As-Built Plans for Jonesboro Owners and Architects
Trusted by Leading Brands and Industry Leaders
What you get
Jonesboro is the medical and retail hub for Northeast Arkansas, and hospitals, clinics and shopping centers are the buildings that change most often: a suite is reconfigured, a wing is added, and the record set falls behind. ADS brings it back up to date with a LiDAR scan. The scan is registered into a 3D point cloud, and from that cloud we draft 2D CAD floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF, a Revit model at LOD 200–300, and MEP and structural elements where scoped. A 360° digital twin lets your consultants check conditions remotely, and BOMA/REBNY area calculations are available on request.
We have not yet published a Jonesboro or Arkansas project. The nearest work on our site is in Dallas, Texas: the 2,798 sq ft James Perse store on North Fitzhugh Avenue (2025) and a 4,635 sq ft single-level brick and wood home in Hillcrest (2025). Beyond that is the 5,132 sq ft Fendi boutique at Phipps Plaza in Atlanta (2022).
How a Jonesboro project runs: you send the address, approximate square footage and the deliverables you want; the quote is itemized, with travel as its own line since the crew travels in. On scan day a technician captures the building with a Leica RTC360, Leica BLK2GO or Matterport Pro3 while it stays open. We register the scans, draft the drawings or model from the point cloud, and you review before final delivery.
Jonesboro FAQ
What does it cost?
Floor area, interior complexity, the deliverables you need and travel. Point cloud plus 2D CAD is the entry tier; a Revit model adds drafting hours. The quote is itemized so you can trim it.
Is it worth bringing you in from out of town?
On a clinic, a campus building or a retail center, yes: a day or less on site, the rest remote, so travel is a modest share of the whole. On a single small suite it is a larger share, which is why it is shown separately.
How accurate is it?
The scanner measures and the drawings are traced from the point cloud, not from the last set of plans. We use the Leica RTC360, Leica BLK2GO or Matterport Pro3 depending on the space.
Does the building have to close?
No. Patients, students and staff carry on; the technician works around them, and quiet-hours scanning can be arranged for clinical areas.
Will the drawings work for my permit?
Yes, as the existing-conditions base for your architect's or engineer's submittal. In Jonesboro, building permits and inspections are handled by the city's Inspections Department. Your design professional files; we make sure the existing conditions in the set are correct.
Who owns the files?
You do. CAD, PDF, Revit and the point cloud are delivered to you and your consultants.
Nearby ADS projects
Scanned by our crews in Texas and Georgia
- James Perse, 3337 N Fitzhugh Ave
Dallas, TX · 2,798 sq ft · 2025
Mapping systems and panels was the core MEP task at this 2,798 sq ft property. ADS delivered a LiDAR point cloud, an LOD 300 Revit model with 3D views, AutoCAD drawings, annotated PDF sheets and a 360° digital twin. - Hillcrest Single-Level Brick & Wood Home
Dallas, TX · 4,635 sq ft · 2025
The sloped garage terrain at this Dallas residence had to be modeled with its topography and elevation changes. ADS also mapped lighting, audio, alarm and security systems so future technical work could be planned. - Fendi, Phipps Plaza
Atlanta, GA · 5,132 sq ft · 2022
At Atlanta's Phipps Plaza, ADS scanned two neighboring suites that were to be merged for a new Fendi store, then modeled mechanical, electrical and structural systems throughout both so the combined layout could be redesigned.
Permits & governing bodies
City of Jonesboro Inspections Department issues building permits and performs building, plumbing, electrical and HVAC inspections (jonesboroar.gov).
Where we work
Jonesboro, including Downtown and the Arkansas State University area, plus Paragould, Brookland, Bono and the rest of Craighead County.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
