top of page

As-Built Drawings in Fond du Lac, WI

Know What's Built Before You Renovate in Fond du Lac

Trusted by Leading Brands and Industry Leaders

dcms-as-Built-services.jpg

What you get

The problem an as-built solves in Fond du Lac is the same as anywhere: the building has changed since it was drawn, or was never drawn at all. ADS scans it with LiDAR and delivers whichever of these you order: a registered 3D point cloud, a 360° digital twin for remote review, 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections), a Revit model at LOD 200–300, and MEP or structural elements where scoped. BOMA or REBNY area calculations are available on request.

We have not yet published a Fond du Lac or Wisconsin project. The nearest is a June 2025 pre-installation survey of a 400 sq ft luxury kitchen in Chicago. Elsewhere in the Midwest we scanned the 1,750 sq ft Daylight Coffee shop on Pinehurst Drive in Basehor, Kansas in May 2024, a project with a testimonial from architectural designer John Burgess, and documented the 4,358 sq ft Windsor store at Easton Town Center in Columbus, Ohio in 2025.

How a Fond du Lac project runs: you send the address, approximate square footage and the deliverables you need, and we send an itemized quote with travel as its own line. The scan is a single visit and the building stays open. We register the scans into one point cloud, draft the drawings from it, and you review before final delivery.

6C6F5EE2-DA2A-45D3-A1F2-2ECC3C5A0D85.png

Fond du Lac FAQ

What does it cost?
Square footage, the amount of detail in the space, which deliverables you want and travel determine the quote. A point cloud with 2D CAD is the base; a Revit model is extra drafting. Every item is listed separately.

Is it worth bringing you in from out of town?
We have no Wisconsin office, so travel is its own line on the quote and you can weigh it directly. In return one scan visit records the whole building for every consultant on the project.

How accurate is it?
The space is scanned with Leica RTC360, Leica BLK2GO or Matterport Pro3 equipment and drawn from the registered point cloud, so dimensions are measured rather than assumed.

Does the building have to close?
No. The technician works through the building while it is in use; evening or weekend scanning can be arranged.

Will the drawings work for my permit?
Yes. Your architect or engineer uses the set as the existing-conditions base for an alteration or addition permit from the City of Fond du Lac's Inspection Division, part of the Community Development Department, which requires permits for interior and exterior alterations as well as new buildings and additions. They file; we make sure the existing conditions are right.

Who owns the files?
You do. Point cloud, CAD, PDF and Revit files are delivered to you and your consultants.

4K.png

Nearby ADS projects

Scanned by our crews in the Midwest:

  • Luxury Kitchen Pre-Install in Chicago
    Chicago, IL · 400 sq ft · 2025
    Before the cabinets went in, ADS measured every accessible lighting, HVAC and plumbing outlet in this kitchen and confirmed placement on site. Scope was limited to visible components so the data stayed reliable.
  • Daylight Coffee, Pinehurst Drive
    Basehor, KS · 1,750 sq ft · 2024
    Floor, reflected ceiling and roof plans, elevations, AutoCAD drawings with annotated PDF sheets, high-resolution LiDAR data and a 360° digital twin for collaboration were handed to the design team for this 1,750 sq ft cafe.
  • Windsor, Easton Town Center
    Columbus, OH · 4,358 sq ft · 2025
    ADS scanned the sales and service areas of this Windsor store, capturing the windows facing the mall corridor, fitting rooms and storage, and produced CAD drawings plus a digital twin for client presentations.

Permits & governing bodies
Building permits in Fond du Lac are issued by the City of Fond du Lac Inspection Division, part of the Community Development Department, at 160 South Macy Street on the first floor of the City/County Government building. Permits are required for new buildings, additions and interior and exterior alterations; applications can be emailed, mailed or dropped off.

Where we work
Downtown Fond du Lac, Main Street, the lakeshore, North Fond du Lac and neighbouring Oshkosh, Ripon, Waupun and Sheboygan.

To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: alteration, addition, tenant improvement, lease plan, insurance or facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.

dcms_section_call-action.png

Power Your Project with Precision

Get reliable LiDAR data, 3D scans, and as-built documentation to move forward with accuracy and confidence.

Talk to a Specialist – Available Every Day, Anytime

ADS As-Built Projects

Delivering verified accuracy across three industries.

EDUCATION

EDUCATION

ENGINEERING

ENGINEERING

HOSPITALITY

HOSPITALITY

bottom of page