As-Built Drawings in Fishers, IN
Know What's Built Before You Renovate in Fishers
Trusted by Leading Brands and Industry Leaders
What you get
Most Fishers buildings are young enough that drawings exist somewhere, but rarely match what was built. An ADS as-built replaces guesswork with a LiDAR scan. From it you receive a registered 3D point cloud, a 360° digital twin you can open in a browser, 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections) and, if your consultants work in BIM, a Revit model at LOD 200–300. Exposed MEP and structural elements are documented when scoped, and BOMA or REBNY area calculations are available for lease plans.
We have not yet published a Fishers or Indianapolis-area project. The nearest is Windsor at Easton Town Center in Columbus, Ohio, a 4,358 sq ft store documented in 2025. In Chicago we surveyed a 400 sq ft luxury kitchen in June 2025 before the cabinetry was installed, and in Basehor, Kansas, we scanned the 1,750 sq ft Daylight Coffee building in May 2024.
How a Fishers project runs: send the address, approximate square footage and the deliverables you need, and we quote with travel as its own line, since our crews are not based in Indiana. A technician scans the space in one visit without closing it. We register the scans into one point cloud, draft from it, and send you the set to review before final delivery.
Fishers FAQ
What does it cost?
Square footage, how much is in the space, the deliverables you want and the trip to Fishers decide the price. Point cloud plus 2D CAD is the lowest tier, Revit adds modelling time, and every line is itemized so you can remove what you do not need.
Is it worth bringing you in from out of town?
For an office, retail or medical space of any real size, yes. The scan is one visit, and the travel line is shown before you commit. Several Hamilton County properties can be grouped into one trip.
How accurate is it?
We scan with Leica RTC360 and BLK2GO scanners and the Matterport Pro3 and draft from the point cloud, so dimensions come from the measured record rather than a tape or an old plan.
Does the building have to close?
No. Tenants keep working while we scan, and we can schedule around clinic hours or store traffic.
Will the drawings work for my permit?
Yes. The set is the existing-conditions base your architect or engineer submits for a tenant improvement or renovation. Permits in Fishers are issued by the city; your design professional handles the application, and our job is to make sure the existing conditions in it are right.
Who owns the files?
You do. Point cloud, CAD, PDF and Revit are delivered to you and your consultants.
Nearby ADS projects
Scanned by our crews in Ohio, Illinois and Kansas:
- Windsor, Easton Town Center
Columbus, OH · 4,358 sq ft · 2025
The central double-height zone of this mall unit, with its arch feature and suspended lighting, needed detailed MEP documentation. ADS modeled ceiling systems from scan data and zoned the sales, fitting and back-of-house areas. - Luxury Kitchen Pre-Install in Chicago
Chicago, IL · 400 sq ft · 2025
Part of ADS's ongoing collaboration with a prestigious Florentine manufacturer, this 400 sq ft Chicago kitchen was surveyed ahead of cabinetry installation to keep layout coordination precise and head off discrepancies on site. - Daylight Coffee, Pinehurst Drive
Basehor, KS · 1,750 sq ft · 2024
Ducts, beams and suspended lights in this Basehor cafe's open ceiling were modeled from the scan. The CAD drawings separate customer, prep and service areas within the compact layout to support fit-out.
Permits & governing bodies
Building permits in Fishers are issued by the city; your architect or engineer confirms the department, code edition and submittal requirements for your address.
Where we work
The Nickel Plate District, Geist and the rest of Fishers, plus Noblesville, Carmel, McCordsville, Lawrence and northeast Indianapolis.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance or facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
