As-Built Drawings in Conroe, TX
Your Conroe Building, Measured and Drawn in CAD
Trusted by Leading Brands and Industry Leaders
What you get
We have not documented a Conroe building yet; our nearest published Texas projects are in Dallas and Amarillo, listed below. The scope of work is the same wherever the building is.
What an ADS as-built includes depends on what you order. The base is a registered 3D point cloud of the whole building. From it we draft 2D CAD in AutoCAD and PDF: floor plans, reflected ceiling plans, elevations and sections. Teams that work in BIM get a Revit model at LOD 200–300. A 360° digital twin lets you walk the space in a browser without another site visit, and MEP and structural elements are documented where they are in scope. BOMA or REBNY area calculations are available on request.
The nearest examples: a 2,798 sq ft James Perse store at 3337 N Fitzhugh Ave in Dallas, scanned in April 2025 after fit-out, and a 4,635 sq ft single-level brick and wood home in Dallas's Hillcrest area, documented in late March 2025. In Amarillo, the 8,200 sq ft Brown Subaru dealership was captured with a Leica RTC360 in November 2024 to produce floor plans, elevations and sections for a renovation.
For a Conroe project you send the address, square footage and deliverables; we quote with travel as its own line. The scan is one visit and the building stays open. We register the scans, draft the drawings, and you review them before we deliver the final set.
Conroe FAQ
What does it cost?
Pricing follows square footage, complexity (an empty warehouse bay is faster than a finished clinic with ceilings and exposed services), the deliverables you pick, and travel to Conroe. Point cloud and 2D CAD is the entry tier; Revit adds modeling time. The quote is itemized.
How accurate is it?
We measure with Leica RTC360 and BLK2GO scanners and Matterport Pro3 and draw from the point cloud, so what you get is the building as it stands, not as the old plans say it should be.
Does the building have to close?
No. Scanning happens around staff, customers and furniture. If a restaurant or shop would rather not have a technician on the floor during service, we schedule before opening or after close.
Will the drawings work for my permit?
Yes. The drawings are prepared as the existing-conditions base for the application your architect or engineer files. Inside the Conroe city limits that application goes to the City of Conroe's building department. Your design professional handles the submittal; we make sure the existing conditions in it are right.
Who owns the files?
You do. We deliver the point cloud, CAD, PDF and Revit files to you and your consultants.
Nearby ADS projects
Scanned by our crews elsewhere in Texas:
- James Perse, 3337 N Fitzhugh Ave
Dallas, TX · 2,798 sq ft · 2025
Mapping systems and panels was the core MEP task at this 2,798 sq ft property. ADS delivered a LiDAR point cloud, an LOD 300 Revit model with 3D views, AutoCAD drawings, annotated PDF sheets and a 360° digital twin. - Hillcrest Single-Level Brick & Wood Home
Dallas, TX · 4,635 sq ft · 2025
Expansive windows framed the custom woodwork, steel and granite of this single-story Preston Hollow residence. A full LiDAR survey inside and out also recorded the surrounding vegetation and unique textures to support precise renovation planning. - Brown Subaru
Amarillo, TX · 8,200 sq ft · 2024
ADS combined a Leica RTC360 and a Matterport Pro3 to capture this 8,200 sq ft Brown Subaru building, then drafted in AutoCAD and Revit. The high-density point cloud recorded architectural detail, and the walkthrough added project visualization.
Permits & governing bodies
Building permits inside the Conroe city limits are issued by the City of Conroe's building department; your architect or engineer files the application.
Confirm the permitting jurisdiction for addresses outside the city limits before scoping.
Where we work
Conroe, Lake Conroe, The Woodlands, Montgomery, Willis, Spring and the rest of Montgomery County.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
