top of page

As-Built Drawings in Berwyn, IL

Renovating in Berwyn? Start With Real Measurements

Trusted by Leading Brands and Industry Leaders

dcms-as-Built-services.jpg

What you get

When you hire ADS in Berwyn, a technician scans the building with a Leica RTC360, Leica BLK2GO or Matterport Pro3 and we draft from the scan. The deliverables depend on what you order: a registered 3D point cloud, a 360° digital twin you can walk through in a browser, 2D CAD in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections), a Revit model at LOD 200–300, and MEP or structural elements where scoped. BOMA and REBNY area calculations are available on request.

Our nearest published project is a few miles east, in Chicago: a 400 sq ft pre-installation survey for a luxury kitchen in June 2025, scanned so the cabinetry could be built to the room as it actually measures. We have not yet published a Berwyn project. Further out are the 4,358 sq ft Windsor store at Easton Town Center in Columbus, Ohio (2025) and the 1,750 sq ft Daylight Coffee store in Basehor, Kansas (2024). Berwyn's brick bungalows, two-flats and the commercial buildings on Cermak Road and Roosevelt Road are documented the same way.

How a Berwyn project runs: you send the address, approximate square footage and the deliverables you need, and get an itemized quote with any travel on its own line. Scanning is one visit while the building stays in use. The scans are registered, the drawings are drafted from the point cloud, and you review the set before we deliver the final files.

6C6F5EE2-DA2A-45D3-A1F2-2ECC3C5A0D85.png

Berwyn FAQ

What does it cost?
Floor area, how much is inside, the deliverables you select and travel. Point cloud plus 2D CAD is the lowest tier; a Revit model adds drafting time. Everything is itemized.

Is it worth bringing you in from out of town?
Our nearest published work is in Chicago, so for Berwyn the travel line is small. The scan is one visit, and drafting is remote either way.

How accurate is it?
Every dimension comes from the registered point cloud, not a tape measure. If your engineer needs a stated tolerance, ask for it in the quote.

Does the building have to close?
No. Tenants, staff and customers carry on while the technician scans; after-hours visits can be arranged.

Will the drawings work for my permit?
Yes. Building permits in Berwyn are issued by the City of Berwyn Building Department, 6700 W. 26th St., which reviews under the 2024 International Building Code with local amendments. Your architect or engineer submits the application; our drawings are the existing-conditions base.

Who owns the files?
You do. Point cloud, CAD, PDF and Revit files are delivered to you and to the consultants you name.

4K.png

Nearby ADS projects

Scanned by our crews in Chicago and across the Midwest:

  • Luxury Kitchen Pre-Install in Chicago
    Chicago, IL · 400 sq ft · 2025
    Part of ADS's ongoing collaboration with a prestigious Florentine manufacturer, this 400 sq ft Chicago kitchen was surveyed ahead of cabinetry installation to keep layout coordination precise and head off discrepancies on site.
  • Windsor, Easton Town Center
    Columbus, OH · 4,358 sq ft · 2025
    Distinct floor finishes, fixed wall cabinetry along broad sales areas, generous fitting rooms and distributed ceiling lighting characterized this Columbus mall unit ahead of its adaptation for Windsor. ADS documented architectural and MEP systems across its sales and service areas.
  • Daylight Coffee, Pinehurst Drive
    Basehor, KS · 1,750 sq ft · 2024
    Outdoor seating and on-site parking came with this Basehor coffee shop's prominent corner lot, and large storefront windows brought natural light inside. ADS captured the existing layout with LiDAR to guide renovations and spatial coordination.

Permits & governing bodies
Building permits in Berwyn are issued by the City of Berwyn Building Department, 6700 W. 26th St. The City reviews under the 2024 International Building Code and 2024 International Residential Code with local amendments; applications are submitted in person or by email to the department.

Where we work
Berwyn's bungalow belt, the Depot District, Cermak Road and Roosevelt Road, Cicero, Oak Park, Riverside, North Riverside, Stickney, Brookfield and Chicago's West Side.

To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: renovation, addition, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.

dcms_section_call-action.png

Power Your Project with Precision

Get reliable LiDAR data, 3D scans, and as-built documentation to move forward with accuracy and confidence.

Talk to a Specialist – Available Every Day, Anytime

ADS As-Built Projects

Delivering verified accuracy across three industries.

EDUCATION

EDUCATION

ENGINEERING

ENGINEERING

HOSPITALITY

HOSPITALITY

bottom of page