As-Built Drawings in Apopka, FL
Apopka As-Built Drawings, Measured on Site
Trusted by Leading Brands and Industry Leaders
What you get
We have not yet published an Apopka or Orlando-area project. The nearest are on the Gulf coast and in Jacksonville: a 64,115 sq ft supermarket building in Bradenton (April 2025), a 1,053 sq ft single-family house in Jacksonville (December 2024) and an 8,426 sq ft residence on Boca Grande (summer 2024). The Bradenton job shows what a Florida commercial scan looks like: two floors of a long-vacant building with unlit zones, captured with a Matterport Pro3 and turned into floor plans, a roof plan, exterior elevations and an LOD 300 Revit model. The contractor, Tom Rockwell of Rockwell Contracting, wrote that "clear communication and quick delivery made everything seamless."
For an Apopka building you choose from the same menu: a registered 3D point cloud from a Leica RTC360, BLK2GO or Matterport Pro3; a 360° digital twin for remote walkthroughs; 2D CAD in AutoCAD and PDF covering floor plans, reflected ceiling plans, elevations and sections; a Revit model at LOD 200–300; MEP and structural elements where scoped; and BOMA or REBNY area calculations on request.
How an Apopka project runs: you send the address, approximate square footage and the deliverables you want, and we send back an itemized quote with travel as a separate line. One technician scans in a single visit while the building keeps operating. We register the scans, draft the set, and you review it before we issue final files.
Apopka FAQ
What does it cost?
Price follows floor area, interior complexity, the deliverables you select and travel. A point cloud with 2D CAD costs the least; adding a Revit model adds modeling time. The quote is itemized line by line.
Is it worth bringing you in from out of town?
Usually, yes. Travel is one line on the quote, and for a warehouse, church or shopping plaza the alternative, a hand survey that still leaves gaps, costs more to fix later than the trip does.
How accurate is it?
All drawings are drafted from a registered point cloud, so every wall, opening and height is measured. In Bradenton the same method captured correct roof geometry and elevations in zones with no lighting at all.
Does the building have to close?
No. We scan around staff and customers, and can work before opening or after close where aisles are busy.
Will the drawings work for my permit?
Yes. Your architect or engineer uses the set as the existing-conditions base for a renovation, addition or change-of-use application to the city's building department. One Florida rule worth knowing: condominium and cooperative buildings three stories or taller fall under the state's milestone structural inspection requirement (Florida Statutes 553.899), and an as-built set gives the inspecting engineer a measured starting point.
Who owns the files?
You do. Point cloud, CAD, PDF and Revit are delivered to you and your consultants without restriction.
Nearby ADS projects
Scanned by our crews across Florida:
- Supermarket Building in Bradenton
Bradenton, FL · 64,115 sq ft · 2025
Generous ceiling heights and open interior volumes ran across both floors of this Bradenton property, empty for some time before its complete restoration. ADS used a structured scan workflow to keep documentation consistent across multiple interior zones. - Single-Family House in Jacksonville
Jacksonville, FL · 1,053 sq ft · 2024
Interior and exterior spaces of this compact single-family residence were scanned in full on site, and ADS generated detailed 2D CAD outputs from the survey data to set up future renovation and spatial planning. - Boca Grande Residence
Boca Grande, FL · 8,426 sq ft · 2024
An 8,426 sq ft waterfront residence documented to support planned renovations and ongoing maintenance. A two-hour on-site LiDAR scan produced the data for an LOD 350 Revit model, CAD floor plans, elevations, sections and georeferenced orthophotos.
Permits & governing bodies
Building permits for work inside the city limits are reviewed by the City of Apopka's building department. Condominium and cooperative buildings three stories or taller are subject to Florida's milestone structural inspections (Florida Statutes 553.899).
Where we work
Apopka, Wekiwa Springs, Errol Estate and Rock Springs Ridge, plus Ocoee, Winter Garden, Altamonte Springs, Maitland, Longwood and northwest Orlando.
To get a quote, send
• Property address
• Approximate square footage and number of floors
• What it is for: tenant improvement, renovation, lease plan, insurance, facility records
• Deliverables: point cloud, 2D CAD, Revit, MEP
• Your deadline
Existing drawings, even old ones, help us scope faster.
