GREENWICH, CT · FAIRFIELD COUNTY

BALDWIN FARMS RESIDENCE · 6,200 SQ FT · DOCUMENTED 2025
As-Built Drawings in Greenwich, CT
ADS provides LiDAR-based as-built drawings in Greenwich, Connecticut. In winter 2025 our team documented a 6,200 sq ft contemporary residence in Baldwin Farms, scanning in phases around the snow and delivering a point cloud, an LOD 300 Revit model, CAD drawings and a 360° digital twin of every level from basement to attic.
✓
Itemized quote, travel shown up front
✓
You own every file
✓
Your building stays in use
Project log: Baldwin Farms residence
GREENWICH, CONNECTICUT · WINTER 2025
KEPT
Jan 7 to Feb 6, 2025
SIZE
6,200 sq ft
USE
Single-family residence
CAPTURE
LiDAR
MODEL
LOD 300 Revit
This is the Baldwin Farms project set out as a log. The first and last entries carry the two dates on the project record. The entries between them are arranged from the outside in, then from scan to drawing.
ENTRY 01
Jan 7
2025 · LOG OPENS
A white house in the trees, and snow on the ground
The house is a 6,200 sq ft contemporary residence in Baldwin Farms. It has white facades, expansive glazing and double-height living and dining spaces that open the rooms to the landscape around them.
The brief was a precise BIM model and a technical drawing set that a design team could renovate from. The season was winter, so the survey had to be planned around it.

The lot from above
ENTRY 02
Outside
WINTER 2025

Terrace under snow, in the scan
The exterior, scanned in phases around the snow
Winter snow stood in the way of a full exterior capture. The scans were phased so that the coverage ended up complete.
Phased scanning. Complete exterior coverage.
The workflow stayed LiDAR-based throughout, which kept the measurements precise in winter conditions.
ENTRY 03
Inside
WINTER 2025
Every level, from the basement to the attic
Indoors the scan covered all levels of the house, attic and basement included. Openings, fenestration and lighting fixtures were all recorded, so the design team has dependable references to work from.

Kitchen and living room

Balcony over the living space

Bedroom

Living area, then its point cloud
ENTRY 04
Roof
WINTER 2025
The roof and attic took the most care
The roof and attic geometry is complex. Those scans needed detailed alignment before the dimensions could be trusted.
Roof geometry built into the model
Ceiling heights recorded

Attic plan

3D sections
Architectural detailing carried through so the spaces read as one building
ENTRY 05
Model
WINTER 2025
The point cloud becomes an LOD 300 Revit model
The 3D geometry for every level was built directly from the point cloud data. The result is an LOD 300 Revit model with dimensional accuracy and a complete virtual representation of the house.

Revit model over the scan

Scan compared with linework

Exterior views of the model
ENTRY 06
Sheets
WINTER 2025
Drawings drafted, annotated and scheduled
The CAD drawings and PDF sheets were drafted with full annotation. The CAD and BIM deliverables are integrated, so planning and design stay coordinated.

First-floor plan

Second floor and ceiling plan

Sections and elevations

Door and window schedules
MARGIN NOTE
Client
SENSUS DESIGN STUDIO
“Our team truly appreciates the professionalism and accuracy consistently demonstrated.”
“We have no additional feedback from our side, as we are very happy with the quality of work AS-BUILT DRAWING SERVICES delivers.”
Christine Cheong
Architectural Designer, Sensus Design Studio
ENTRY 07
Feb 6
2025 · LOG CLOSES
What the design team received
High-resolution LiDAR point cloud
LOD 300 Revit model of all levels
Door and window schedules
360° digital twin for remote review
CAD drawings and PDF sheets, fully annotated
INDEX
What you can order for a Greenwich property
One scan can feed any of these. Every quote is itemized, so you pay for the lines you need and nothing else.
The raw measured record of the building, for teams that model in-house.
Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF.
An LOD 200–300 model built from the scan, for consultants who work in BIM.
Exposed mechanical, electrical and plumbing recorded where it is in scope.
Drawn from aerial or ground capture where the project calls for them.
BOMA area figures for leasing and asset records, on request.
FILES YOU RECEIVE
DWG
RVT
IFC
NWC
E57
Matterport
NOTES ON THE TOWN
Permits and review in Greenwich
Your architect files the application. Our job is to make sure the existing conditions, and the existing floor areas, are right before anything is drawn on top of them.
NOTE 1 · BUILDING
Town of Greenwich Building Inspection Division
The division is in Town Hall at 101 Field Point Road. It enforces the Connecticut State Building Code and issues building and trade permits.
NOTE 2 · ZONING
Zoning review
Additions and alterations are also reviewed against the town’s zoning regulations, so measured existing floor areas matter before design starts.
WHERE WE WORK
Greenwich, Old Greenwich, Riverside, Cos Cob, Byram, Stamford, Rye and Port Chester.
QUESTIONS
Asked before a Greenwich scan
Something else? Call 1-855-201-4043 and ask a specialist.
Q.01
Can you scan a house in winter?
Yes. ADS documented the 6,200 sq ft Baldwin Farms residence between January 7 and February 6, 2025, phasing the scans to achieve complete exterior coverage in snow.
Q.02
Do you model attics and basements?
Yes. The Baldwin Farms model was built for all levels, including the attic and basement, directly from point cloud data, with roof geometry and ceiling heights recorded.
Q.03
Where do the drawings go for a permit in Greenwich?
Your architect submits them as the existing-conditions base to the Town of Greenwich Building Inspection Division at Town Hall, 101 Field Point Road, which enforces the Connecticut State Building Code.
Q.04
What does a residential as-built cost in Greenwich?
Floor area, the number of levels, roof complexity and the deliverables you choose set the price. Travel is shown as its own line on the quote. An LOD 300 Revit model costs more than 2D CAD alone.
Q.05
Does the family have to move out while you scan?
No. Homes are scanned with the family in. We agree a room-by-room schedule ahead of the visit.
ALSO ON THE SHELF
More ADS projects in the Northeast
MORE NORTHEAST CITY PAGES
·
·
·
·
THE NEXT LOG IS YOURS
Tell us about your Greenwich property
Four details are enough for us to price it. Existing drawings help us scope faster, even old ones.
STEP 1
Send the basics
The address, approximate square footage and the deliverables you need.
STEP 3
Scan day
The family stays home. In winter we phase the exterior scans around the weather.
STEP 2
Get an itemized quote
Each deliverable is its own line, and so is travel.
STEP 4
Review and delivery
Drawings are drafted from the point cloud. You review the set before final delivery.
PREFER TO TALK?
Itemized quote, one line per deliverable. Scanned by the team behind the Baldwin Farms residence. CAD, PDF, Revit and point cloud files are yours to keep.
MEMBERSHIPS




Reviewed by Antonio Tomecich
Founder & Director, As-Built Drawing Services.
Last reviewed November 2026.


