NEW YORK CITY, NY · FIVE BOROUGHS
As-Built Drawings in New York City, NY
ADS provides LiDAR-based as-built drawings in New York City. Since July 2024 our team has documented five spaces here: a 2,500 sq ft SoHo office suite, three Manhattan nail salons and a 4,581 sq ft retail unit in the Bronx. Each one ended in CAD drawings and a Revit model built from the scan.
✓
Travel is one line on the quote
✓
You own every file
✓
Your space stays in use

SOHO OFFICE SUITE · 2,500 SQ FT · SCANNED JULY 2024
INDEX · 5 PROJECTS · 2 BOROUGHS
Our New York work, listed by neighborhood
NEIGHBORHOOD
PROJECT
Find the neighborhood closest to your building and open the row. Each entry shows what the space was, what we captured, what was delivered and a link to the full project page.
AREA
SCANNED
MANHATTAN
4 PROJECTS
SOHO
SETTING
A multi-story building in Lower Manhattan, surrounded by galleries, studios and shops.
SCOPE
Full interior LiDAR survey.
Office suite in Manhattan
Commercial · open-plan office
2,500 sq ft
Jul 24 to 30, 2024
The suite has an open layout with exposed beams, visible MEP and generous ceiling heights. The survey was ordered to support architectural upgrades, space planning and future renovation, so the team mapped the beams, ducts and fixtures and modeled the multi-zone layout by function.
High-resolution LiDAR point cloud
360° digital twin
2D CAD: floor plans, RCPs, elevations, sections and schedules
LOD 300 Revit model
“Fast and precise, I highly recommend”
Will Kang, Founder and Creative Director at Aether NY

EXPOSED BEAMS AND PIPEWORK

FLOOR PLAN FROM THE SCAN
GREENWICH VILLAGE
Russian Nails salon in Greenwich Village
1,673 sq ft
Jan 27 to 30, 2025
Retail · ground floor and basement
SETTING
A two-level retail space with exposed beams, open ceilings and industrial finishes.
SCOPE
Scan to BIM across both floors.
The space was documented ahead of the fit-out of a new nail salon. Both floors were recorded, with partitions, framing and structure, and the ceiling systems were captured with their HVAC, lighting and piping. Stair and level connections were coordinated so the two floors line up vertically.
High-resolution LiDAR point cloud
360° digital twin
LOD 300 Revit model with 3D visualization views
AutoCAD drawings and coordinated PDF sheets
“Precision, professionalism, and speed. Exceeded expectations.”
Azizhan Urmagambetova, Business Owner

THE SPACE BEFORE FIT-OUT

AS-BUILT FLOOR PLAN SHEET
MIDTOWN SOUTH
Russian Nails salon, Midtown South
2,590 sq ft
Sep 27 to Oct 2, 2024
Retail · working salon
SETTING
A tight salon layout with mirrors and glossy finishes.
SCANNER
Matterport Pro3.
This interior scan was the base for a renovation. Mirrors and glossy surfaces called for carefully chosen scanning angles to keep visual noise out of the data. The design timeline was short, so the point cloud was processed quickly and the CAD and BIM files were delivered within days.
High-density point cloud
LOD 350 Revit model
As-built 2D CAD drawings
Virtual Matterport walkthrough
“Antonio's team was extremely professional, delivered everything ahead of schedule.”
Azizhan Urmagambetova, Business Owner

SALON IN USE DURING CAPTURE

SCAN DATA IN PLAN VIEW
FINANCIAL DISTRICT MAIDEN LN
Russian Nails salon, Maiden Lane
Retail · 4th floor
1,500 sq ft
Oct 29 to Nov 8, 2024
SETTING
The 4th floor of a commercial building, with exposed systems and street-facing windows.
SCOPE
Scan to BIM: architecture, structure and MEP.
The salon was surveyed for renovation planning, with close attention to the stairs, ducts and fixtures. Site access was restricted, so the scan was planned to be quick. The PDF layouts and sections were issued in dual units for a design team working across countries.
High-resolution LiDAR point cloud
360° digital twin
LOD 300 Revit model with utilities, stairs and lighting
AutoCAD drawings and annotated PDF sheets
“Our design team was highly impressed with the quality of the work.”
Azizhan Urmagambetova, Business Owner

EXPOSED DUCTS OVER THE STATIONS

STREET-FACING WINDOWS
THE BRONX
1 PROJECT
BAYCHESTER AVE
Retail space on Baychester Avenue
4,581 sq ft
Jan 22 to 30, 2026
Retail · single level, units 148 to 150
ADDRESS
200 Baychester Ave, Bronx.
CAPTURE
Matterport, then modeled in Revit.
A combined retail unit that needed a full as-built set before store design began. Fixture layouts drawn on guessed dimensions would have meant rework during build-out, so the 3D model was built directly from the scan data and not traced from old drawings. MEP observations were included.
Floor plan of existing conditions
Reflected ceiling plan: heights, soffits and fixtures
Exterior elevations and sections
3D model, delivered in CAD, PDF and Revit
“Their Revit models and 3D virtual tours are accurate and ready to use.”
Ivette Ramos, Architectural Designer at Alloi Architecture + Construction

SALES FLOOR AND FITTING ROOMS

PLAN WITH FIXTURE POSITIONS
WHERE WE WORK
All five boroughs, plus Long Island and Westchester
We have scanned repeatedly in Manhattan and on Long Island, so New York is part of our normal route. Co-op and condo apartments follow the same workflow as commercial space.
MANHATTAN 4 PROJECTS
THE BRONX 1 PROJECT
BROOKLYN
QUEENS
STATEN ISLAND
LONG ISLAND
WESTCHESTER
WHAT YOU CAN ORDER
Every drawing starts from one registered point cloud
Pick the deliverables your project needs. CAD only is the lowest tier, adding Revit adds modeling time, and every quote is itemized.
DELIVERABLE
Registered point cloud
2D CAD as-builts
Revit model
MEP and structure
Facade and site drawings
Area calculations
WHAT YOU GET
SERVICE PAGE
The measured 3D record of the space, plus a 360° digital twin for remote walkthroughs.
Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF.
A model at LOD 200 to 300 built from the scan, as delivered for the SoHo office and the salons.
Exposed ducts, pipes, beams and fixtures recorded where they are in scope.
Exterior elevations and site plans. Scan-based facade elevations are a useful record for a Local Law 11 cycle.
BOMA or REBNY area figures for leasing work, on request.
FILE FORMATS
DWG
RVT
IFC
NWC
E57
Matterport
HOW IT RUNS
Four stops from first email to final set
STOP 1
STOP 2
STOP 3
STOP 4
Send the basics
The address, the square footage and the deliverables you need. We reply with a quote.
Scan day
A technician moves through the space with a Leica RTC360, BLK2GO or Matterport Pro3 while the office, store or apartment stays in use. A Manhattan storefront is typically a single visit.
Registration and drafting
The scans are registered into one point cloud and the drawings are drafted from it.
Your review
You review the set before we finalize it. The CAD, PDF, Revit and point cloud files go to you and your consultants.
PERMITS AND REVIEW
Two rules most New York projects meet
Your architect or engineer handles the filing. Our set is the existing-conditions base they file with.
PERMITS
NYC DEPARTMENT OF BUILDINGS
Issues construction permits across all five boroughs. See nyc.gov/buildings.
For an alteration, your design professional files the as-built set as the record of existing conditions.
FACADES
LOCAL LAW 11 (FISP)
Requires periodic facade inspections of buildings taller than six stories.
Facade elevations drawn from a scan give the inspection cycle a measured record to work from.
QUESTIONS
New York City FAQ
Something else? Call 1-855-201-4043 and ask a specialist.
Q1
Has ADS worked in New York City before?
Yes. ADS has documented five spaces in the city since July 2024: an office suite in SoHo, nail salons in Greenwich Village, Midtown South and the Financial District, and a retail unit on Baychester Avenue in the Bronx.
Q3
Does my store or office have to close for the scan?
No. The Midtown South and Maiden Lane salons and the SoHo office suite were all documented while in use. Early or after-hours scans can be arranged for trading floors and restaurants.
Q5
How accurate are the drawings in an older building?
Every dimension is measured from the point cloud, not from a tape. In pre-war buildings that means out-of-plumb walls, uneven slabs and column offsets appear as they are instead of being idealized.
Q2
Is it worth bringing ADS in from out of town?
New York is part of our normal route. We have scanned repeatedly in Manhattan and on Long Island, and travel appears as its own line on the quote. Co-op and condo apartments follow the same workflow as commercial space.
Q4
Will the drawings work for a Department of Buildings filing?
Yes. The set is the existing-conditions base your architect or engineer files with the NYC Department of Buildings for an alteration, and your design professional handles the filing. If the building is taller than six stories, Local Law 11 (FISP) facade inspections apply, and scan-based facade elevations are a useful record for that cycle.
Q6
What sets the price of a New York survey?
Floor area, how much there is to draw, the deliverables you pick and access set the price. A white-box retail space takes less drafting than a fitted salon or an office full of exposed MEP. CAD only is the lowest tier, adding Revit adds modeling time, and every quote is itemized.
NEXT EXITS
More Northeast city pages
UP THE HUDSON
Larger buildings follow the same workflow
In spring 2025 we scanned the 565,308 sq ft Poughkeepsie State Office Building for a renovation program that needed interior layouts, facade elevations and the topography of the surrounding parking and grounds. On Long Island we documented the 7,788 sq ft Kings Point beachfront residence the same year.
GET A QUOTE
Five things to send for a New York quote
1
Property address
2
Approximate square footage and number of floors
3
What it is for: alteration filing, tenant fit-out, lease plan, facade record, insurance or facility records
4
Deliverables: point cloud, 2D CAD, Revit, MEP
5
Your deadline
Existing drawings, even old ones, help us scope faster.
PREFER TO TALK?
MEMBERSHIPS




Reviewed by Antonio Tomecich
Founder & Director, As-Built Drawing Services.
Last reviewed November 2026.