KINGS POINT, NY · LONG ISLAND
As-Built Drawings in Kings Point, NY
ADS (As-Built Drawing Services) documents properties as they stand, inside and out, from a LiDAR scan. In Kings Point we spent ten days in August 2025 surveying a 7,788 sq ft beachfront residence: a three-level main house and a separate pool house. The data became an LOD 300 Revit model with annotated AutoCAD and PDF sheets.
✓
House and grounds in one visit
✓
You own every file
✓
Travel is a separate line

BEACHFRONT RESIDENCE · 7,788 SQ FT · AUG 2025

ACROSS THE LAWN TO THE WATER, PHOTOGRAPHED DURING THE SURVEY
7,788 sq ft
surveyed across the property
2 buildings
main house and a separate pool house
3 levels
in the main house, with basements in both
10 days
of LiDAR scanning, inside and out
Aug 4 to 14
2025, one mobilization
LOD 300
Revit model of both structures
WATERFRONT AND COASTAL NOTES
What a house on the water adds to the survey
01
First-floor elevation
A waterfront expansion has to show it for FEMA and local zoning review. It was part of the capture.
02
Distance from the high-water mark
The setback from the water is reviewed too. It was measured in the same survey.
03
Topography
Grade changes across the lot were recorded with the buildings, in the same survey.
04
Seawall
The slopes of the seawall were recorded along the waterfront edge.
The owner's team needed more than floor plans. A waterfront expansion is reviewed against the water as well as the lot lines, so the grounds were scanned along with the rooms. These are the eight things to know.
05
Terraces and pool
High-accuracy scans ran across the terraces and the pool as well as the rooms.
06
Utilities and pool equipment
The location of underground utilities and pool equipment went into the same record.
07
Facades
All exteriors were captured, with their decorative and structural details, for the exterior elevations.
08
Access on scan day
The family can stay in residence. Exterior scanning needs clear access to the facades, terraces and the waterfront edge.
OUR WORK IN KINGS POINT
Two buildings on a slope, held in one dataset

SECTION THROUGH THE POINT CLOUD
BOTH BUILDINGS ON THE SLOPE
A dual-building scope
Dimensional precision was maintained between the main house and the pool house, so the two models agree with each other.
Stairs and basements
Vertical and circular circulation made for complex geometry. Stairs, pitched roofs and interior layouts were modeled to LOD 300.
Outdoor and waterfront terrain
High-accuracy scans ran across the terraces, the pool and the sea-facing areas.

Front and back elevations of the main house. The grade line is part of the drawing.

Site plan with contours, both buildings on one sheet.
WHAT WAS DELIVERED, AND WHAT YOU CAN ORDER
From the scan to the sheets
The Kings Point set was a high-resolution LiDAR point cloud, a 360° digital twin for remote review, an LOD 300 Revit model with coordinated views, and annotated AutoCAD and PDF sheets. Your scope can be smaller or larger. Each item is its own line on the quote.
Point cloud and digital twin from 3D laser scanning, which your architect and consultants can walk through remotely.
2D CAD drawings through as-built services: floor plans, reflected ceiling plans, elevations and sections.
Revit model at LOD 200 to 300 from BIM services.
MEP and structure where scoped. See MEP documentation.
Site features such as terraces, pools and grade changes, drawn as building site plans.
Exterior elevations and topography, each an added scope, through our building surveys.
DWG
RVT
IFC
NWC
E57
Matterport
“Our team truly appreciates the professionalism and accuracy consistently demonstrated.”
“We are excited to kick off another project together soon, just waiting for our client to confirm the final details before moving ahead.”
Christine Cheong
Architect at Sensus Design Studio
PERMITS AND REVIEW
Before work starts in the Village of Kings Point
THE OFFICE
Village of Kings Point Building Department
32 Steppingstone Lane
Kings Point NY 11024
(516) 504-1000
Mon to Fri, 9:30 am to 4:30 pm
PERMITS ISSUED
Four kinds
Building, mechanical, swimming pool and curb-cut permits all come from the village.
SEQUENCE
Permit first
It is unlawful to begin erecting or altering a building until a permit has been issued.
VALIDITY
Two years
Building permits expire two years from the date of issue.
WHERE WE WORK
Kings Point, Great Neck, Great Neck Plaza, Manhasset, Port Washington, Sands Point, Roslyn, Lake Success and the Queens side of Little Neck Bay. Your architect files the application. Our set is the existing-conditions base.
MORE NORTHEAST PAGES
Nearby projects: a 2,500 sq ft office suite in SoHo and a 2,590 sq ft salon in Midtown South, both in Manhattan.
QUESTIONS
Kings Point FAQ
SIX ANSWERS · SCROLL SIDEWAYS →
01
Can you document the grounds, pool and seawall as well as the house?
Yes. On the Kings Point residence ADS recorded the terraces, pool, seawall slopes and the location of underground utilities and pool equipment alongside the house itself.
02
What does a waterfront expansion need from the survey?
It needs the first-floor elevation and the distance from the high-water mark, because FEMA and local zoning review both look at them. ADS captured both on the beachfront project, together with topography and exterior elevations.
03
Who issues building permits in Kings Point?
The Village of Kings Point Building Department issues building, mechanical, swimming pool and curb-cut permits. No erection or alteration of a building may start until a permit is issued. Your architect files, and the ADS set is the existing-conditions base.
04
Does the house have to be empty during the scan?
No. Owners and staff can stay. The technician moves station to station through the rooms and works around furniture. Exterior scanning needs clear access to the facades, terraces and the waterfront edge.
05
Is it worth bringing ADS in from out of state?
For a house of this size, yes. The travel is one fixed line, and a single scan replaces separate visits from a surveyor for the exterior and a draftsperson for the interior. The Kings Point estate was captured in one mobilization: inside, outside and grounds.
06
How do you keep three floors and a second building lined up?
Levels, stairs and basements are tied together in one dataset, so the floors of a house line up in the model. ADS scans with Leica RTC360 and BLK2GO scanners and the Matterport Pro3 and drafts everything from the registered point cloud. On the Kings Point project, dimensional precision was maintained between the main house and the pool house.

THE PROPERTY ON THE SHORELINE, HIGHLIGHTED
GET A QUOTE
Tell us about your Kings Point property
Send the address, approximate square footage, number of levels and whether you need the grounds and exterior as well as the interior. ADS has no office in the Northeast, so travel is a separate line on the quote.
MEMBERSHIPS




Reviewed by Antonio Tomecich
Founder & Director, As-Built Drawing Services.
Last reviewed November 2026.