top of page

/Brookline, MA

BROOKLINE, MA · TOWN OF BROOKLINE

As-Built Drawings in Brookline, MA

ADS (As-Built Drawing Services) turns LiDAR scans into drawing sets that architects, engineers and facilities teams can rely on. In Brookline we surveyed a seven-story, 51,542 sq ft storage facility in November 2024 and delivered a point cloud of every floor, a 360° walkthrough, floor plans, reflected ceiling plans and elevations, with annotated CAD and PDF sheets organized by level.

✓

Travel is a separate line

✓

Your building stays open

✓

You own every file

Corridor of storage units with red roll-up doors and a rolling stair inside the Brookline storage facility

STORAGE FACILITY · 51,542 SQ FT · NOV 2024

LEDGER 01 · OUR WORK IN BROOKLINE

What was measured and what was delivered

Our Brookline reference is a big one, so it is set out here as a ledger. Section A is what the crew measured on site. Section B is what the drafting team issued. Section C is what happened after delivery.

WAREHOUSE FACILITY IN BROOKLINE

NOV 11 TO 25, 2024

REF

ENTRY

DETAIL

AMOUNT

A · MEASURED ON SITE

A-01

Levels scanned

A complete LiDAR survey of the building, every floor.

7 levels

A-02

Floor area

A storage facility in the busy town center.

51,542 sq ft

A-03

Storage units

Each unit captured so it could be modeled individually.

Unit by unit

A-04

Split levels

Split-level units, stairs and sublevels tied into the main floors.

Included

A-05

Irregular layouts

Non-linear floor geometry aligned by cross-referencing the point cloud.

Aligned

A-06

Dim corridors

Scanner placement and data correction used in dark or obstructed areas.

Covered

A-07

Exposed MEP

Visible mechanical, electrical and plumbing runs and vertical systems.

Recorded

B · DRAWN AND DELIVERED

B-01

Point cloud

High-density scan data.

All floors

B-02

360° digital walkthrough

For project coordination and review.

Whole building

B-03

Floor plans

Architectural as-built plans.

Per level

B-04

Reflected ceiling plans

Ceiling layouts drawn from the scan.

Per level

B-05

Elevations

The building faces, drawn from the scan.

Issued

B-06

CAD and PDF sheets

Fully annotated AutoCAD sheets, organized per level and prepared for layout and submission.

Per level

B-07

Revit model

Units, stairs, sublevels and vertical systems.

Modeled

C · AFTER DELIVERY

C-01

Additional deliverables

The request began as a simple floor plan and grew. The extra sheets came from the same dataset.

0 return visits

REMARKS FROM THE CLIENT

“The scope grew, kept up at every step”

Having the scan made it easy to request more.

David Williams, Director of Market Development at SSG Development, LLC

The documentation supports facility management, future upgrades and long-term operational planning across all levels. View the full project →

PLATES

Aerial 3D view of the Brookline town center with the surveyed building highlighted among brick neighbors

P.1 The building in its block, highlighted.

Row of storage units with red roll-up doors and metal partitions inside the Brookline facility

P.2 Storage units, each modeled on its own.

Point cloud of the Brookline building from the street corner with the side cut away to show the storage floors

P.3 Point cloud, cut away to show the floors.

As-built floor plan of one level of the Brookline facility showing rows of individual storage units in an irregular footprint

P.4 One level in plan, unit by unit.

LEDGER 02 · WHAT YOU CAN ORDER

Six lines you can put on a Brookline quote

Every quote is itemized. Point cloud and 2D CAD is the base tier. A Revit model and MEP add scope. If your needs grow later, more sheets can be drafted from the scan you already have.

REF

S-01

S-02

S-03

S-04

S-05

S-06

LINE

WHAT YOU RECEIVE

A registered 3D point cloud and a 360° digital walkthrough for coordination and review.

2D CAD in AutoCAD and PDF: floor plans, reflected ceiling plans, elevations and sections.

A Revit model at LOD 200 to 300.

Mechanical, electrical, plumbing and structural elements where scoped.

The building drawn on its lot.

BOMA area calculations on request, for lease plans and facility records.

FILE FORMATS

DWG

PDF

RVT

IFC

NWC

E57

Matterport

As-built elevation sheet showing the front and back faces of the Brookline facility with level lines

P.5 Front and back elevations.

LEDGER 03 · PERMITS AND REVIEW

Town of Brookline Building Department

Your architect or engineer files the application, and applications must include plans. Our set is the existing-conditions base.

Address

Phone

Hours

A permit is required to

The application needs

Review, most applications

Review, larger projects

333 Washington Street, Brookline MA 02445

617-730-2100

Monday to Thursday 8 am to 5 pm. Friday 8 am to 12:30 pm.

Construct, alter, repair, remove or demolish a building, change its use or occupancy, or install equipment regulated by the Massachusetts State Building Code (780 CMR).

Plans, licenses, an insurance certificate and the fee.

7 to 10 days

Up to 30 days for larger commercial projects and new one- and two-family dwellings.

WHERE WE WORK

Brookline Village, Coolidge Corner, Washington Square, Chestnut Hill and Longwood. Across the line in Boston: Fenway, Back Bay, Allston and Jamaica Plain. Also Newton and Cambridge.

MORE NORTHEAST PAGES

LEDGER 04 · QUERIES

Brookline FAQ

Q-01

Do you handle multi-story commercial and industrial buildings?

Q-02

Can I ask for more drawings after the scan is finished?

Q-03

Does the building have to close during the survey?

Q-04

Who issues building permits in Brookline?

Q-05

How do you scan dark corridors and blocked sightlines?

Q-06

What sets the cost of a survey in Brookline?

Yes. ADS has documented seven levels of split-level storage in Brookline, a 565,308 sq ft state office campus in Poughkeepsie and a 126,500 sq ft office building in Miami. Each level is scanned and registered so floors stack correctly in the model.

Yes. The Brookline facility was scanned once, and when the owner's scope grew, the extra sheets came from the same dataset without a second visit.

No. The storage facility stayed open during the survey. ADS works around tenants and staff and can scan outside hours where needed.

The Town of Brookline Building Department issues them. A permit is required to construct, alter, repair, demolish or change the use of a building under the Massachusetts State Building Code (780 CMR), and applications must include plans. The ADS set is the existing-conditions base your architect or engineer files. The town says most applications take 7 to 10 days to review and larger commercial projects up to 30.

Low light and obstructions are handled with scanner placement and data correction on the job. ADS uses Leica RTC360 and BLK2GO scanners and the Matterport Pro3 and drafts from the registered point cloud.

Floor area, number of floors, how much is inside, the deliverables you need and travel set the price. A storage facility with hundreds of units takes more drafting than an open warehouse. Point cloud and 2D CAD is the base tier, and a Revit model and MEP add scope. Every quote is itemized.

Point cloud of the Brookline building seen from the street, with the storage floors visible behind the brick fronts

P.6 Street fronts and the floors behind them, in one dataset.

ELSEWHERE IN THE NORTHEAST

A 6,200 sq ft residence in Greenwich, Connecticut, scanned in phases around snow in early 2025, and a 2,500 sq ft office suite in Manhattan.

LEDGER 05 · GET A QUOTE

Open an entry for your Brookline building

Send the address, approximate square footage, number of floors and the deliverables you need. ADS has no New England office. The technician travels in and travel is a separate line on the quote.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

PREFER TO TALK?

USEFUL TO SEND

Property address

Square footage and number of floors

What the drawings are for

Deliverables you need

Your deadline

Existing drawings, even old ones

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page