top of page

/Rancho Santa Fe, CA

RANCHO SANTA FE, CA · SAN DIEGO COUNTY

As-Built Drawings in Rancho Santa Fe, CA

ADS provides LiDAR-based as-built drawings in Rancho Santa Fe, California. In October 2024 our team documented a 17,864 sq ft estate, including the main residence, pool house and landscaped grounds, and delivered a point cloud, georeferenced orthophotos, an LOD 350 BIM model, 2D CAD drawings and a virtual walkthrough.

✓

Itemized quote, travel shown up front

✓

Your building stays in use

✓

You own every file

Aerial view of the estate in Rancho Santa Fe, California, documented by ADS

RANCHO SANTA FE ESTATE · 17,864 SQ FT · DOCUMENTED 2024

LEGEND

17,864 SQ FT · OCT 14 TO 21, 2024

One estate, three zones, one visit

The estate needed 3D documentation of its main residence, pool house and landscaped grounds ahead of high-end renovations. ADS ran a full-property LiDAR scan that covered the architecture and the landscape together, and reached all three zones in a single visit.

The legend above is how this page is organised. Each zone has its own block below, then the three come back together as one model.

A

ZONE A

Main residence

The house was scanned to capture its architectural and structural detail. It was then modelled in BIM and drawn in 2D CAD, so the renovation team starts from measured conditions.

CAPTURED

High-density LiDAR point cloud

MODELLED

LOD 350 BIM model

DRAWN

2D CAD drawings for renovation documentation

Entrance of the residence in Rancho Santa Fe
3D model and aerial view of the Rancho Santa Fe estate

ZONE B

Pool house

The pool house was captured on the same visit as the main residence. It sits in the same point cloud and the same model, so the two buildings are documented together.

CAPTURED

Same visit as the main residence

MODELLED

Inside the integrated estate model

B

C

ZONE C

Landscaped grounds

The scan took in the landscape as well as the buildings. Georeferenced orthophotos were delivered for site and landscaping coordination, and the landscape data was integrated with the architecture for coordinated planning.

CAPTURED

Landscape elements, in the full-property scan

DELIVERED

Georeferenced orthophotos

Aerial views of the Rancho Santa Fe estate and its grounds
Point cloud plan view of the Rancho Santa Fe estate

+

+

=

ONE MODEL

Architecture and landscape, integrated into a single model

“Their ability to capture and integrate detailed architectural and landscape data into a single digital model gave our team the clarity we needed to move forward confidently.”

“Their professionalism, accuracy, and responsiveness make them an invaluable partner for complex residential work.”

Point cloud view of the Rancho Santa Fe estate

The estate as one point cloud

As-built drawing sheets for the Rancho Santa Fe residence

2D drawings from the model

Hayley Johnson

Principal Designer, Rakis Design

DELIVERED 1

High-density LiDAR point cloud of the full estate

DELIVERED 2

Georeferenced orthophotos for site and landscape coordination

DELIVERED 3

LOD 350 BIM model

DELIVERED 4

2D CAD drawings for renovation documentation

DELIVERED 5

Virtual walkthrough for stakeholder review

WHAT YOU CAN ORDER

Deliverables, keyed to what they describe

Every quote is itemized, so you pay for the formats you need and nothing else.

For the buildings

Registered point cloud. The raw measured record from our 3D laser scanning, for teams that model in-house.

2D CAD as-builts. Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF, through our as-built services.

Revit model. An LOD 200–300 model built from the scan for consultants who work in BIM. See scan to BIM.

MEP documentation. Exposed mechanical, electrical and plumbing recorded where it is in scope. See MEP documentation.

For the site

Roof and site plans. Drawn from aerial or ground capture where the project calls for them. Read about building site plans.

For the records

Area calculations. BOMA area figures for leasing and asset records, on request, as part of our building surveys.

FILE KEY

DRAWINGS

DWG, PDF

BIM MODEL

RVT, IFC, NWC

POINT CLOUD

E57

WALKTHROUGH

Matterport

FOUR STOPS

How a Rancho Santa Fe project runs

Send the basics

The address, approximate square footage and the deliverables you need.

Get an itemized quote

Each deliverable is its own line, and so is travel.

Scan day

House, outbuildings and grounds are captured in the same visit. The household stays in place.

Review and delivery

Drawings are drafted from the point cloud. You review the set before final delivery.

PERMITS AND REVIEW IN RANCHO SANTA FE

Two bodies review a Rancho Santa Fe project

Rancho Santa Fe has two layers of review. Your architect handles both. We make sure the existing conditions are right for each.

LAYER 1

COUNTY

County of San Diego Planning & Development Services

Rancho Santa Fe is unincorporated, so building permits come from the County rather than a city.

PLUS, INSIDE THE COVENANT

LAYER 2

ASSOCIATION

Rancho Santa Fe Association design review

Properties inside the Covenant, recorded in 1928, also need the Association’s design review, and the Association issues its own building permit.

Grading, landscape and exterior materials

The Association has its own regulations for each, so accurate site and landscape data matter as much as the house itself.

WHERE WE WORK

Rancho Santa Fe, Fairbanks Ranch, Del Mar, Solana Beach, Encinitas, Carmel Valley and La Jolla.

GET A QUOTE

Tell us about your Rancho Santa Fe property

Four details are enough for us to price it. Existing drawings help us scope faster, even old ones.

PREFER TO TALK?

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

Itemized quote, one line per deliverable

Scanned by the team behind the Rancho Santa Fe estate project

CAD, PDF, Revit and point cloud files are yours to keep

QUESTIONS

Rancho Santa Fe questions, answered

Something else? Call 1-855-201-4043 and ask a specialist.

Can you document an estate with outbuildings and grounds?

Yes. ADS documented a 17,864 sq ft Rancho Santa Fe estate in October 2024, covering the main residence, pool house and landscaped grounds in a single visit and one integrated model.

Do you deliver models above LOD 300?

Yes. The Rancho Santa Fe estate was delivered as an LOD 350 BIM model with 2D CAD drawings, georeferenced orthophotos and a virtual walkthrough.

Who reviews a renovation in Rancho Santa Fe?

Two bodies. The County of San Diego issues the building permit because the community is unincorporated, and properties inside the Covenant also need the Rancho Santa Fe Association’s design review.

What does an estate as-built cost in Rancho Santa Fe?

Floor area, the number of buildings, how much of the grounds is included and the model level of detail set the price. Travel is shown as its own line on the quote.

Does the household have to leave while you scan?

No. Scanning is non-contact and the property stays occupied. We agree the sequence of rooms and outdoor areas ahead of the visit.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page