SHERMAN OAKS, CA · SAN FERNANDO VALLEY
As-Built Drawings in Sherman Oaks, CA
ADS scans buildings with LiDAR and drafts as-built drawings from the scan. In Sherman Oaks we surveyed about 1,000 sq ft of a hillside home, the secondary entrances and hallways only, with a Matterport Pro3 in 2025, and delivered a point cloud, a 360° digital twin and annotated AutoCAD and PDF sheets for renovation planning.
✓
Partial surveys welcome
✓
You own every file
✓
Travel is its own quote line

ENTRYWAY AND HALL · 1,000 SQ FT · 2025
SCOPE OF SURVEY
Two sides of one house, and nothing more
AREA
1,000 sq ft
SURVEYED
Secondary entrances and hallways
BUILDING
Multi-level private residence
DESIGN
Mid-century and contemporary
SITE
Hillside, steep terrain, split levels
SCANNER
Matterport Pro3
POINT CLOUD
RCP format
PURPOSE
Renovation planning
YEAR
2025

POINT CLOUD ELEVATION, CUT THROUGH THE SLOPE
01
THE IDEA
Small jobs are welcome
This was a targeted survey. It is the kind a designer orders before reworking a foyer, stair or hallway, when paying to measure the whole house makes no sense.
We scan the rooms you are changing, plus enough of the surroundings to tie them in. You pay for that area, not the whole house.
FOYER
STAIR
HALLWAY
ENTRY
02
WHAT CAME BACK
Three deliverables for a 1,000 sq ft scope
High-resolution LiDAR point cloud. Clean, in RCP format, ready for BIM work in Revit and AutoCAD.
360° digital twin. So the design team can look around the space without another visit.
AutoCAD drawings and PDF sheets. Fully annotated and coordinated.

Stair passage and arched entrance

Section sheet, house against the slope

Entry sections with reference views
03
WHAT MADE IT EXACT
A steep site is harder to measure than a flat one
Split-level terrain. Elevation shifts and varied entry points were handled through targeted scan alignment.
Different entrances. Each entrance has its own geometry, and each was documented so dimensions hold on every front.
Facade heights and openings. Captured with high-definition Matterport scanning.
04
FROM THE CLIENT SIDE
Responded quickly and delivered accurate survey documentation.
Their team handled a focused 3D scan of two sides of the property with remarkable speed, ensuring minimal disruption.
Kieran Morris, Project Manager at DSG Group
05
WHAT YOU CAN ORDER
Order one piece, or the whole set
An ADS as-built turns a LiDAR scan of your property into the documents a renovation needs. You choose the pieces. We quote them separately.
Registered point cloud
The scan itself, for teams that model in-house.
E57
2D CAD as-builts
Floor plans, reflected ceiling plans, elevations and sections.
DWG
Revit model
LOD 200 to 300. Adds modeling time.
RVT
IFC
NWC
MEP documentation
MEP or structural elements, where scoped.
RVT
360° digital twin
Walk through the space online with your consultants.
Matterport
Site plans and building surveys
Including BOMA or REBNY area calculations on request.
06
PERMITS AND REVIEW
Sherman Oaks files with the City of Los Angeles
Sherman Oaks is inside the City of Los Angeles, so building permits go through the Los Angeles Department of Building and Safety (LADBS). Applications are filed online through ePlanLA. Your architect or engineer handles the submittal. We make sure the base drawings are right.
Ordinance 183893
Mandatory soft-story retrofit for pre-1978 wood-frame buildings of two or more stories with ground-floor parking or similar open space. Residential buildings with three or fewer units are exempt.
Where we work: Sherman Oaks, Studio City, Encino, Van Nuys, Valley Village, North Hollywood, Tarzana, Woodland Hills, Toluca Lake and Burbank.
07
SHORT ANSWERS
Sherman Oaks questions
01
Can you survey just one part of a house?
–
Yes. The Sherman Oaks job covered an entryway and hall only. We scan the rooms you are changing plus enough of the surroundings to tie them in, and you pay for that area, not the whole house.
01
Is a 1,000 sq ft job too small to bring a crew in for?
–
Usually not. ADS has no California office, so travel is a visible line on the quote, and it is small next to the drafting on most jobs. If the numbers do not work for a very small job, we will say so.
01
How long does a partial survey take on site?
–
Hours rather than days. A single technician moves through the rooms with the scanner, and the home stays lived in while the work is done.
01
Where do Sherman Oaks permits get filed?
–
With the Los Angeles Department of Building and Safety (LADBS), because Sherman Oaks is inside the City of Los Angeles. Applications are filed online through ePlanLA, and the nearest counter is the Van Nuys Development Services Center at 6262 Van Nuys Blvd.
01
Does the soft-story ordinance affect Sherman Oaks apartment buildings?
–
It can. If you own a pre-1978 wood-frame apartment building with tuck-under parking, Ordinance 183893 may require a soft-story retrofit. Residential buildings with three or fewer units are exempt. An accurate existing-conditions set is what the engineer starts from.
01
Can a scanner handle stairs and split levels?
–
Yes. Stairs, sloped ceilings and hillside homes are captured in three dimensions in one coordinate system. On the Sherman Oaks survey, elevation shifts and varied entry points were handled through targeted scan alignment.
GET A QUOTE
Tell us which rooms. We will tell you if it adds up.
ADS has no California office, so crew travel appears as its own line on the quote. On most jobs it is small next to the drafting. If it is not, we will say so before you commit.
1
Send three things. The address, the approximate square footage and the deliverables you want.
2
Read the quote. It is itemized, so a partial survey costs a fraction of a whole-house set.
3
Scan visit. One technician, a few hours for a partial survey, and the home stays in use.
4
Mark up the set. Drawings are drafted from the point cloud. You review them before the final files are issued.
PREFER TO TALK?
MEMBERSHIPS




Reviewed by Antonio Tomecich
Founder & Director, As-Built Drawing Services.
Last reviewed November 2026.