top of page

/Solana Beach, CA

SOLANA BEACH, CA · NORTH COUNTY SAN DIEGO

Two-level shopping center in Solana Beach with an elevated access ramp, storefronts and parking, documented by ADS

SOLANA BEACH SHOPPING MALL · JANUARY 2025

As-Built Drawings in Solana Beach, CA

ADS scans buildings with LiDAR and turns the scan into as-built drawings. In Solana Beach we documented the 146,404 sq ft Solana Beach Shopping Mall in January 2025 with ground LiDAR and drone capture, and delivered a point cloud, orthophotos, an LOD 300 Revit model, 2D CAD plans and a virtual walkthrough.

✓

Travel is its own quote line

✓

Stores stay open

✓

You own every file

OUR LARGEST WEST COAST PROJECT

146,404

SQUARE FEET

Retail and common area, documented in one coordinated survey.

PROJECT DATES

January 14 to 31, 2025.

PROPERTY

Solana Beach Shopping Mall, a coastal retail and mixed-use complex.

Aerial view of the Solana Beach Shopping Mall showing its tiled roofs, courtyards, parking courts and access roads

THE WHOLE SITE, FROM THE AIR

ROOFS, COURTS, PARKING AND ACCESS ROADS IN ONE DATASET

01 · THE PROPERTY

A retail center whose drawings no longer matched the buildings

The Solana Beach Shopping Mall is a retail and mixed-use complex on the coast. It was being modernized on a large scale, with a refreshed tenant mix and new lifestyle and wellness concepts.

A center like this is the kind of property where the owner's drawings are a mix of decades of tenant alterations. The redevelopment team needed one current, measured record of the whole site before design could move forward.

02 · THE CAPTURE

Ground scanning and drone capture, joined into one model

The site has many zones, indoors and out. ADS ran LiDAR on the ground and drone-based capture from the air across all structures, then blended the aerial and ground scans so coverage stayed consistent between them.

The datasets were processed and aligned into outputs ready for BIM. Tenants kept trading throughout, and a remote walkthrough let the project move forward without disrupting them.

SOLANA BEACH SHOPPING MALL

FLOOR AREA

146,404 sq ft

DATES

Jan 14 to 31, 2025

CAPTURE

LiDAR + drone

Aerial and ground scans blended

MODEL

LOD 300 Revit

With coordinated 2D CAD plans

SITE

Multi-zone

Indoor and outdoor spaces

TENANTS

Not disrupted

Reviewed by remote walkthrough

Revit views of the Solana Beach Shopping Mall showing a site plan, an architectural section and the 3D BIM model

Site plan, section and 3D model views in Revit, all built from the registered scan.

03 · THE DELIVERY

Four deliverables, set up for design, leasing and the developer

A

High-density LiDAR point cloud

The measured record of every structure on the site.

B

Georeferenced orthophotos

Aerial reference imagery tied to real coordinates.

C

LOD 300 Revit model and coordinated 2D CAD plans

One model and one plan set that agree with each other.

Top-down 3D BIM view of the Solana Beach Shopping Mall showing rooftops, HVAC equipment, parking lots and access roads

D

Virtual walkthrough

Off-site review for people who cannot visit.

04 · THE RESULT

The design team has used the model since the day it arrived

We've been quite impressed with the model! Our design team has been using it extensively since delivery, and it's proven to be a valuable asset.

We're currently collaborating on a project in Solana Beach, and the accuracy and clarity of your model have made a real difference in our process.

Lee Lowell, Assistant Project Manager at Capstone, California

05 · YOUR PROJECT

How a Solana Beach project runs

ADS does not have a California office. The crew travels in, and travel is its own line on the quote.

01

Send the basics

The address, approximate square footage and the deliverables you want.

03

Scan days

The technician works through the property while stores trade and homes stay occupied.

02

Itemized quote

Each deliverable is a line. Large centers are priced by area, so the work can be phased.

04

Review, then final files

Scans are registered into one point cloud, drawings are drafted from it, and you review the set first.

SITE AGAINST MODEL

The same corners, as built and as modeled

SCROLL SIDEWAYS →

Site photograph and 3D BIM model of Solana Beach Shopping Mall showing storefronts, outdoor seating, a pedestrian bridge and parking

PARKING COURT

Storefronts, seating and the pedestrian bridge.

Grayscale 3D BIM model above a site photograph of the elevated pedestrian ramp and storefronts at Solana Beach Shopping Mall

ELEVATED RAMP

Model above, site photograph below.

Grayscale Revit BIM model above a realistic 3D view of a corner restaurant building at Solana Beach Shopping Mall, showing roof and exterior equipment

CORNER BUILDING

Roof, storefronts and exterior equipment.

BIM model above an architectural rendering of a commercial building at Solana Beach Shopping Mall with rooftop HVAC equipment and curved facades

ROOFTOP PLANT

HVAC equipment, curved facades and canopies.

Revit BIM views of a storefront at Solana Beach Shopping Mall showing the facade, timber roof supports and a pedestrian passage between buildings

STOREFRONT AND PASSAGE

Facade, timber roof supports and the walkway between buildings.

WHAT YOU CAN ORDER

Start with the base. Add what the job needs.

An ADS as-built is a LiDAR scan converted into usable drawings. Each step up adds drafting time, and each item is a separate line on the quote.

1

BASE TIER

Point cloud and 2D CAD

A registered point cloud from 3D laser scanning, plus as-built drawings: floor plans, reflected ceiling plans, elevations and sections.

E57

DWG

PDF

2

ADD MODELING

Revit model and MEP

A Revit model at LOD 200 to 300, with MEP documentation and structural elements where they are in scope. Plans and sections are cross-checked against the 3D model so the sheets and the Revit file agree.

RVT

IFC

NWC

3

FOR A RETAIL CENTER

Leasing and site set

A master base plan with per-tenant sheets, BOMA or REBNY area calculations from a building survey, site plans with georeferenced orthophotos, and a 360° digital twin for remote walk-throughs. Area figures matter when you are leasing retail space.

Matterport

PDF

DWG

PERMITS AND REVIEW IN SOLANA BEACH

Where your designer takes the drawings next

WHO REVIEWS

Building Services Division

Part of the City of Solana Beach Community Development Department. It reviews plans and issues building permits.

WHERE

635 S. Highway 101

Solana Beach.

CODE IN FORCE

2025 California building codes

Adopted by the City with local amendments, effective January 1, 2026.

Your architect handles the application. ADS makes sure the base drawings are right, so the submittal starts from measured existing conditions.

WHERE WE WORK

Solana Beach, Del Mar, Cardiff-by-the-Sea, Encinitas, Carlsbad, Rancho Santa Fe, Carmel Valley and Torrey Pines.

SOLANA BEACH QUESTIONS

What owners of large properties ask first

Not covered here? Call 1-855-201-4043.

Can you document a whole shopping center?

Yes. The Solana Beach Shopping Mall was 146,404 sq ft. Common areas and suites are scanned in one coordinated job, and the delivery is a master base plan with per-tenant sheets and area calculations.

Do stores have to close during the scan?

No. Retail stays open. The technician works around shoppers and staff, and early-morning or after-hours slots can be arranged for common areas.

Who reviews plans and issues permits in Solana Beach?

The Building Services Division of the City's Community Development Department, at 635 S. Highway 101. The City adopted the 2025 California building codes with local amendments, effective January 1, 2026, so your designer submits under the current code with an existing-conditions set drawn from measured data.

How long does a large retail center take to scan?

Several days on site. A large center like the mall is scheduled over several days, while a house or a single suite takes one visit.

ADS has no California office. Does travel make sense for my job?

For a shopping center, estate or commercial building, yes. Travel is its own line on the quote and is small against the drafting. For a very small survey we will tell you if it does not add up.

Can the work be phased?

Yes. Large retail centers are priced by area and the quote is itemized, so you can phase it. Point cloud plus 2D CAD is the base tier, and Revit modeling and MEP add time.

GET A QUOTE

Ours was 146,404 sq ft. What is yours?

Square footage and an address are enough to start. Existing drawings, even old ones, help us scope faster.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

MORE ADS CITY PAGES ON THE WEST COAST

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page