top of page

/Poughkeepsie, NY

POUGHKEEPSIE, NY · DUTCHESS COUNTY

As-Built Drawings in Poughkeepsie, NY

ADS provides LiDAR-based as-built drawings in Poughkeepsie, New York. In spring 2025 our team documented a 565,308 sq ft state office complex in the Hudson Valley: interior layouts, facade elevations and the topography of its parking and landscaped areas, delivered as a point cloud, Revit model, CAD drawings and a 360° digital twin.

✓

Itemized quote, travel shown up front

✓

You own every file

✓

Your building stays in use

Exterior of the state office building in Poughkeepsie, New York, documented by ADS

STATE OFFICE COMPLEX · 565,308 SQ FT · DOCUMENTED 2025

FLOOR AREA DOCUMENTED IN POUGHKEEPSIE

565,308

SQ FT, ONE STATE
OFFICE COMPLEX

MAR 26, 2025

POUGHKEEPSIE STATE OFFICE BUILDING

APR 8, 2025

A renovation program this size needs one measured record

The complex sits in the Hudson Valley and needed extensive architectural documentation before its renovation program could be designed. ADS documented it with LiDAR between March 26 and April 8, 2025, and built the as-built model in Revit from that data.

3

PARTS TO THE SCOPE

Interior layouts, facade elevations and the topography of the parking and landscaped areas.

6

OUTPUTS DELIVERED

Point cloud, Revit model, topographic model, CAD drawings with PDF sheets, 360° digital twin and a site photo record.

2

TOOLS FOR THE TERRAIN

Civil 3D and Revit, combined to model the site from the same point cloud as the buildings.

Walls, windows and roofs were mapped so they line up across every elevation. Dimensions were then verified across the floor areas, and sections were refined until they agreed.

SITE AND TOPOGRAPHY

The ground was modelled as carefully as the buildings

The scope did not stop at the walls. It included detailed topography of the parking and landscaped areas around the complex, on a large site where the ground rises and falls.

The same point cloud served both jobs. Buildings went into the Revit model, and the ground went into a topographic model that produced the contours on the CAD drawings.

Wide view of the Poughkeepsie state office complex and its grounds

THE COMPLEX WITH ITS PARKING AND LANDSCAPED GROUNDS

1

Isolate the ground

The point cloud was selectively cleaned so ground data could be separated from everything standing on it.

2

Model the terrain

A topographic model was generated from the processed point cloud, using Civil 3D and Revit together.

3

Draw the contours

Contours were delivered in the CAD set, alongside the floor plans and facade elevations.

FROM THE PROJECT FILE

Six sheets, from scanner to drawing set

A campus is captured the same way as a single room: scan it, register the point cloud, model it, then draft from the model. These sheets follow that order.

Laser scanner on a tripod at the Poughkeepsie state office site

1

The scanner set up on site

3D model views of the Poughkeepsie state office complex

4

The complex as a 3D model

SCROLL SIDEWAYS FOR ALL SIX →

Colour-coded point cloud views of the Poughkeepsie state office complex

2

Point cloud of the buildings

Point cloud views of the site used for topographic modelling

3

Site data for the topographic model

As-built drawing sheet for the Poughkeepsie state office building

5

As-built drawing sheet

As-built drawing sheet for the Poughkeepsie state office building

6

A second sheet from the set

CAPTURE: LIDAR · MAR 26 TO APR 8, 2025

FROM THE DESIGN TEAM

Shafi Rahman

Architectural Designer, Willdan

“Their responsiveness and attention to scheduling made the process efficient and straightforward.”

“We appreciated their professionalism and look forward to collaborating again.”

PERMITS AND REVIEW IN POUGHKEEPSIE

One name, two permit offices

Poughkeepsie is two jurisdictions, a city and a town. Check which one your address falls under before your architect files. Our drawings go in as the existing-conditions base either way.

COMPARE

APPLIES TO

PERMIT OFFICE

JURISDICTION 1

City of Poughkeepsie

Properties inside the incorporated city.

City of Poughkeepsie Building Department

JURISDICTION 2

Town of Poughkeepsie

Addresses outside the city limits. The town is a separate jurisdiction.

ADDRESS

WEBSITE

62 Civic Center Plaza, Poughkeepsie, NY 12601

The Town of Poughkeepsie's own building department

One Overocker Road

WHERE WE WORK

Poughkeepsie, Hyde Park, Wappingers Falls, Fishkill, Beacon, Newburgh and Kingston.

WHAT YOU CAN ORDER

Six things one scan can become

Every quote is itemized. You pick the lines your project calls for and pay for nothing else.

1

Registered point cloud

The raw measured record of the building, for teams that model in-house. It comes from our 3D laser scanning service.

2

2D CAD as-builts

Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF, drafted by our as-built services team.

3

Revit model

An LOD 200–300 model built from the scan, for consultants who work in BIM. See scan to BIM.

4

MEP documentation

Exposed mechanical, electrical and plumbing recorded where it is in scope, as part of MEP documentation.

5

Roof and site plans

Drawn from aerial or ground capture where the project calls for them. Read about building site plans.

6

Area calculations

BOMA area figures for leasing and asset records, on request, through our building surveys.

FILE FORMATS YOU RECEIVE

DWG

DRAWINGS

PDF

DRAWINGS

RVT

BIM MODEL

IFC

BIM MODEL

NWC

BIM MODEL

E57

POINT CLOUD

Matterport

WALKTHROUGH

GET A QUOTE

Tell us about your Poughkeepsie property

Four details are enough for us to price it. Existing drawings help us scope faster, even old ones.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

HOW A POUGHKEEPSIE PROJECT RUNS

1

Send the basics

The address, approximate square footage and the deliverables you need.

2

Get an itemized quote

Each deliverable is its own line, and so is travel.

3

Scan day

Large sites are scanned in sections and registered into one dataset. Offices stay in use.

4

Review and delivery

Drawings are drafted from the point cloud. You review the set before final delivery.

PREFER TO TALK?

Itemized quote, one line per deliverable

Scanned by the team behind the Poughkeepsie state office project

CAD, PDF, Revit and point cloud files are yours to keep

QUESTIONS

Five questions we hear in Poughkeepsie

Something else? Call 1-855-201-4043 and ask a specialist.

1

Can you document a very large office complex?

Yes. ADS documented a 565,308 sq ft state office complex in Poughkeepsie in spring 2025, covering interior layouts, facade elevations and site topography, and verified dimensions across the floor areas.

2

Do you survey the site as well as the building?

Yes. For the Poughkeepsie complex, ADS built a topographic model of the parking and landscaped areas from the point cloud, combining Civil 3D and Revit, and delivered contours with the CAD drawings.

4

What does an as-built survey cost in Poughkeepsie?

Floor area, how much detail there is to capture, whether the site is included and the deliverables you choose set the price. Travel is shown as its own line on the quote.

3

Where do the drawings go for a permit in Poughkeepsie?

It depends on the address. Properties inside the city are permitted by the City of Poughkeepsie Building Department at 62 Civic Center Plaza. The Town of Poughkeepsie is a separate jurisdiction with its own building department.

5

Do offices have to close while you scan?

No. Scanning is non-contact, so staff keep working. Sensitive areas can be scheduled around.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page