top of page

/Toronto, ON

TORONTO, ON · ONTARIO, CANADA

Auditorium of the MacMillan Theatre at the University of Toronto, with rows of red seats seen from the stage

MACMILLAN THEATRE · 13,468 SQ FT · WINTER 2024-25

As-Built Drawings in Toronto, ON

ADS provides LiDAR-based as-built drawings in Toronto. Over the 2024-25 holiday period our team scanned the 13,468 sq ft MacMillan Theatre at the University of Toronto's Faculty of Music, from the seating bowl to backstage. We delivered a point cloud, 2D CAD plans, an LOD 300 Revit model and a Matterport virtual tour.

✓

Travel is its own line on the quote

✓

You own every file

✓

Your building stays open

PROGRAMME

The MacMillan Theatre, in three acts

University of Toronto, Faculty of Music

13,468 SQ FT · DEC 20 TO JAN 3
SCANNED OVER THE 2024-25 HOLIDAY PERIOD

THE VENUE

THE PURPOSE

CAPTURE

MODEL

DRAWINGS

A historic performing arts venue

Renovation planning

Matterport Pro3

Autodesk Revit, LOD 300

AutoCAD

ACT ONE

I

CAPTURE

Every architectural and structural detail, from the seating bowl to the backstage areas.

The theatre was surveyed with terrestrial 3D scanning, using a Matterport Pro3. The interior geometry is complex, so the scan recorded the stage, the seating and the acoustic features in detail. The result was a point cloud of the existing conditions that the architectural design, the renovation and the coordination work could all draw on.

Curved balcony and raked seating of the MacMillan Theatre during the on-site scan

THE HOUSE, AS FOUND

Point cloud of the MacMillan Theatre auditorium looking from the seats toward the stage

THE POINT CLOUD

ACT TWO

II

MODEL

A coordinated LOD 300 Revit model of the theatre's architectural elements.

The point cloud was cleaned, refined and built into a scan-to-BIM model in Autodesk Revit, for design development and project planning. The stage, the seating and the acoustic features were modeled directly from the scan data.

Cutaway 3D model of the MacMillan Theatre showing the seating, stage and fly tower

THE MODEL, CUT OPEN

View inside the modeled stage house of the MacMillan Theatre with its galleries and rigging level

INSIDE THE STAGE HOUSE

ACT THREE

III

DRAWINGS

2D CAD floor plans with seating layouts, stage areas and architectural documentation.

The drawings were produced in AutoCAD from the survey data. They were aligned with the theatre's original architectural elements, so the record protects the building's heritage value while the renovation team plans structural and technical modernization.

As-built floor plan of the MacMillan Theatre showing the stage and the curved seating rows

PLAN: STAGE AND SEATING

As-built CAD section through the MacMillan Theatre stage house and auditorium

SECTION: STAGE HOUSE AND AUDITORIUM

ENCORE

THE VIRTUAL TOUR

A Matterport walkthrough was delivered with the set. It gave the renovation team remote access to the survey, so conditions could be checked without another site visit.

NOTICES

“ADS approached the MacMillan Theatre scan with exceptional care, fully preserving the architectural integrity of this historic venue.”

“Their expert team delivered highly detailed documentation, meeting the exact precision needed for future upgrades.”

Christine Vozoris

SENIOR ARCHITECT

ALSO ON THE BILL

What a Toronto project can order

An ADS as-built begins with a LiDAR scan of the building and ends with a drawing set your architect, engineer or contractor can design from. Order the parts you need.

Registered 3D point cloud

The measured record everything else is drawn from, with a 360° digital twin.

2D CAD as-builts

Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF.

Revit model

LOD 200 to 300, when your team works in BIM.

MEP and structure

Mechanical, electrical, plumbing and structural elements where you scope them.

Site plans

The building and its grounds, from the same capture.

Area calculations

BOMA or REBNY figures on request.

FILE FORMATS

DWG

·

PDF

·

RVT

·

IFC

·

NWC

·

E57

·

Matterport

HOUSE RULES

Permits and review in Toronto

The as-built set is the existing-conditions base your architect or engineer submits with a renovation or tenant-improvement application. Your design professional handles the application.

TORONTO BUILDING

The City of Toronto division that reviews permit applications, issues building permits and inspects under the Ontario Building Code and the City's zoning by-laws. See the official building permit page.

ONTARIO BUILDING CODE

The 2024 Building Code Compendium applies province-wide. Enforcement is the responsibility of municipal building officials.

RUNNING ORDER

How a Toronto project runs

1

You send the details

The address, the approximate square footage and the deliverables you need. We return an itemized quote.

2

Travel is priced on its own

We have no Toronto crew, so travel is its own line on the quote. One mobilization normally covers the capture.

3

Scan day

A technician works through the building with the scanner while it stays open to staff, students or customers.

4

Drafting and review

The scans are registered into a single point cloud and the CAD and Revit are drafted from it. You review the set and request revisions before final delivery.

BOX OFFICE

Tell us about your Toronto property

Send the address, the approximate square footage and number of floors, what the drawings are for and your deadline. Existing drawings, even old ones, help us scope faster.

ADMIT ONE BUILDING

ITEMIZED QUOTE

One line per deliverable, and travel on a line of its own. No obligation.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

QUESTIONS FROM THE AUDIENCE

Toronto FAQ

Something else? Call 1-855-201-4043 and ask a specialist.

Does the building have to close during the scan?

–

No. A technician works through the space while it is in use, and after-hours capture can be arranged for stages, trading floors and clinics. The MacMillan Theatre was scanned over the 2024-25 holiday period.

Can you handle heritage and institutional buildings?

–

Yes. The MacMillan Theatre is a historic venue, and its as-built drawings were aligned with the original architectural elements to protect the building's heritage value. Universities, school boards and hospitals get the same package.

Will the drawings work for a Toronto building permit?

–

Yes. The set is prepared as the existing-conditions base your architect or engineer submits with a renovation or tenant-improvement application to Toronto Building, the City division that reviews permit applications, issues permits and inspects under the Ontario Building Code and the City's zoning by-laws. Your design professional handles the application, and we make sure the existing conditions in it are right.

Is it worth bringing ADS to Toronto from out of town?

–

One mobilization normally covers the capture, and everything after it (registration, drafting and modeling) is done remotely. We have no Toronto office, so travel appears on the quote as its own line. The same team has scanned in Toronto and Hamilton, and 15 schools across Northern Ontario in eight days.

How accurate is a scan of a complex interior like a theatre?

–

Every dimension is measured, not assumed. We scan with the Leica RTC360, Leica BLK2GO and Matterport Pro3 and draft from the registered point cloud, not from tape measurements. On the MacMillan Theatre the stage, seating and acoustic features were modeled directly from the scan data.

What sets the price of a survey in Toronto?

–

Price follows floor area, how complex the space is, the deliverables you choose and travel. A bare shell drafts faster than a theatre with raked seating or a store full of millwork. Point cloud plus 2D CAD is the base tier, a Revit model adds modeling time, and every quote is itemized so you can drop what you do not need.

ALSO TOURING

More ADS city pages

Down the QEW in Hamilton we scanned the three-level Teatrix costume store on Kensington Avenue (5,339 sq ft, basement to mezzanine) in February and March 2025, working around racks of inventory.

WHERE WE WORK

Downtown and the Financial District, Yorkville, the Annex, Liberty Village, North York, Scarborough, Etobicoke, East York, Vaughan, Markham, Mississauga and Hamilton.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page