top of page

/Montreal, QC

MONTREAL, QC · GREATER MONTREAL

As-Built Drawings in Montreal, QC

ADS provides LiDAR-based as-built drawings across Greater Montreal. Our team has documented three buildings in the metro area: the 30,000 sq ft Douglas Hospital in Verdun, a 291,798 sq ft secondary school in Pointe-aux-Trembles and a 14,643 sq ft commercial hub in La Prairie. The results were elevations, CAD plans, a BIM model and virtual walkthroughs.

✓

Any travel shown as its own line

✓

You own every file

✓

Your building stays open

Red-brick entrance wing of Douglas Hospital in Verdun, Quebec, documented by ADS

DOUGLAS HOSPITAL, VERDUN · 30,000 SQ FT · 2024

OUR WORK AROUND MONTREAL

A hospital, a school and a commercial hub

Three surveys in three places around the metro area: Verdun, Pointe-aux-Trembles, and La Prairie on the South Shore. Each was a different size and a different problem. The bars compare floor area. The columns under them compare everything else.

BARS DRAWN TO SCALE BY FLOOR AREA

SCHOOL · POINTE-AUX-TREMBLES

291,798 sq ft

HOSPITAL · VERDUN

30,000 sq ft

COMMERCIAL HUB · LA PRAIRIE

14,643 sq ft

HEALTHCARE · VERDUN, QC

Douglas Hospital

Long red-brick facade of Douglas Hospital in Verdun seen from the access road

One of Quebec's historic healthcare facilities. ADS surveyed the exterior for its heritage restoration, working with GR7 Architecture on behalf of the Government of Quebec.

DATES

August to October 2024

CAPTURE

Leica RTC360 laser scanner and DJI Phantom 4 RTK drone

SCOPE

Exterior only, more than 85 elevations

DELIVERED

•

85+ as-built exterior elevations

•

LiDAR point cloud of the facades

•

Georeferenced orthophotos and roof mapping from the drone survey

•

Thermal imaging reports for facade assessment

Exterior elevation of a Douglas Hospital wing drawn over the scan data, showing stone walls, windows and a mansard roof

ONE OF 85+ ELEVATIONS, DRAWN OVER THE SCAN

The team played an essential role in the heritage restoration of Douglas Hospital, delivering over 85 elevation drawings with remarkable precision.

Paul Torres Jones

Architecte Conseiller en bâtiment, Chargé de Projets

EDUCATION · POINTE-AUX-TREMBLES, QC

Pointe-aux-Trembles Secondary School

Concrete exterior of the Pointe-aux-Trembles Secondary School with coloured glass panels and trees in front

The largest of the three by a wide margin. The school was surveyed inside and out to support renovation planning and facility upgrades, and classes carried on throughout.

DATES

October 7, 2024 to February 5, 2025

CAPTURE

3D laser scanning and drone survey

SCOPE

Classrooms, corridors, common areas and exterior spaces

DELIVERED

•

Existing-conditions point cloud

•

Georeferenced orthophotos for site evaluation

•

LOD 300 BIM model and coordinated 2D CAD as-builts

•

Matterport virtual walkthrough for remote review

Aerial orthophoto of the Pointe-aux-Trembles Secondary School roofs, parking areas and sports courts

ORTHOPHOTO OF THE SCHOOL SITE

On the Pointe-aux-Trembles project, their work supported renovation planning and long-term maintenance, all while schools remained fully operational.

Manager of Asset Maintenance Planning

CSSPI

COMMERCIAL · LA PRAIRIE, QC

Multi-unit commercial hub

Aerial view of La Prairie, Quebec, with the multi-unit commercial building highlighted among its neighbours

A two-storey complex on Taschereau Boulevard with several independent retail units, a mezzanine under high ceilings and compact offices upstairs. It was surveyed ahead of tenant improvements.

DATES

April 8 to April 14, 2025

CAPTURE

Matterport Pro3 LiDAR scan

SCOPE

Both levels and the mezzanine, each storefront modelled separately

DELIVERED

•

High-resolution LiDAR point cloud

•

360° digital twin for remote review

•

AutoCAD as-built floor plans

•

Annotated CAD drawings and PDF sheets

Colourised 3D point cloud of the two-storey commercial building in La Prairie

POINT CLOUD OF THE WHOLE BUILDING

Their surveys and documentation always meet high professional standards, with exceptional clarity and accuracy that support our architectural design process from start to finish.

Pierre Leclerc

Architect at Groupe Leclerc architecture + design

WHAT YOU CAN ORDER

Start from the building yours most resembles

Every ADS job begins with a LiDAR scan and ends with drawings your architect, engineer or contractor can design from. What sits in between depends on the building. Each deliverable is its own line on the quote.

LIKE THE HOSPITAL

A heritage exterior

Facade elevations, roof plans and site signage are scoped as their own deliverables, alongside any interior set. Area calculations to BOMA or REBNY can be added on request.

LIKE THE SCHOOL

A large building in daily use

A registered 3D point cloud of the building, inside and out, with a 360° digital twin to check conditions from your desk and a Revit model at LOD 200 to 300 for BIM teams.

LIKE THE COMMERCIAL HUB

Units to fit out or re-let

2D CAD in AutoCAD and PDF: floor plans, reflected ceiling plans, elevations and sections. MEP and structural elements are added where you scope them.

FILE FORMATS

DWG

PDF

RVT

IFC

NWC

E57

Matterport

PERMITS AND REVIEW

In Montreal, the borough issues the permit

The Ville de Montréal directs applicants to the permit counter of the borough where the work takes place. Your design professional files the application. We make sure the existing conditions in it are right.

WHERE WE WORK

Ville-Marie and Old Montreal, Griffintown, the Plateau-Mont-Royal, Westmount, Outremont, Saint-Laurent, Verdun, Pointe-aux-Trembles, Laval, Longueuil, Brossard, La Prairie and Trois-Rivières.

1

The borough, not the city

Construction and renovation permits are issued by the borough (arrondissement) where the work takes place.

2

Standards vary

The standards that apply depend on the borough and on the heritage status of the building or area.

3

Ask the counter, apply online

Questions go to the permit counter of that borough. Several boroughs accept permit applications online.

QUESTIONS

Montreal FAQ

01

Which Montreal-area buildings has ADS documented?

−

Three in the metro area: Douglas Hospital in Verdun (30,000 sq ft), the Pointe-aux-Trembles Secondary School (291,798 sq ft) and a multi-unit commercial hub on Taschereau Boulevard in La Prairie (14,643 sq ft). They were surveyed between August 2024 and April 2025.

01

Does a school or hospital have to close while you scan?

−

No. The Pointe-aux-Trembles school stayed fully operational through a survey of nearly 292,000 sq ft, and the La Prairie retail units were scanned with tenants trading. After-hours capture can be arranged where needed.

01

Do you document exteriors and heritage facades?

−

Yes. The Douglas Hospital package was more than 85 exterior elevations with roof mapping and thermal imaging, produced for a heritage restoration. Facade elevations and roof plans are scoped as their own deliverables alongside the interior set.

01

Who issues the building permit in Montreal?

−

The borough where the work takes place issues it. The standards that apply depend on the borough and on the heritage status of the building or area, and most boroughs accept applications online. Your architect or engineer files the application with our drawings as the existing-conditions base.

01

Is it worth bringing ADS to Montreal from out of town?

−

One mobilization normally covers the capture, and any travel appears on the quote as its own line because we have no Montreal office. Registration, drafting and modelling are done remotely afterwards. Greater Montreal is where much of our Canadian portfolio sits.

01

What sets the cost of an as-built survey in Montreal?

−

Floor area, how complex the building is, the deliverables you choose and any travel set the price. A plain commercial unit drafts faster than a heritage hospital with 85 facades. Point cloud plus 2D CAD is the base tier, and a Revit model adds modelling time.

ELSEWHERE IN QUEBEC

A&W in Trois-Rivières, scanned in winter

Also in Quebec: a 23,771 sq ft A&W site in Trois-Rivières, documented in 2025. Winter weather threatened delays, so the visit was scheduled tightly and the site was captured inside and out with a high-speed Leica RTC360. The signage was captured by drone and modelled separately to match A&W brand guidelines.

MORE CITY PAGES

→

→

→

GET A QUOTE

Tell us about your Montreal building

Existing drawings, even old ones, help us scope faster.

STEP 1

Send the basics

Address, approximate square footage and number of floors, and the deliverables you want.

STEP 2

Itemized quote

One line per deliverable. Any travel is its own line, since we have no Montreal office.

STEP 3

Scan day

A technician works through the building while it stays open.

STEP 4

Review and delivery

Drawings and model are drafted from one registered point cloud. You request revisions before final delivery.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

PREFER TO TALK?

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page