top of page

/Chicago, IL

CHICAGO, IL · COOK COUNTY

As-Built Drawings in Chicago, IL

ADS provides LiDAR-based as-built drawings in Chicago. In June 2025 our team surveyed a 400 sq ft luxury kitchen in the Astor Street District before the cabinetry went in. Every accessible lighting, HVAC and plumbing point was measured and recorded, then delivered as a point cloud, a digital twin and CAD plans, sections and elevations.

✓

Travel quoted as its own line

✓

You own every file

✓

Your building stays open

Chicago kitchen stripped to plywood and drywall before cabinetry installation, with plumbing stub-outs under the window

ASTOR STREET KITCHEN · 400 SQ FT · SURVEYED JUNE 2025

DETAIL SHEET · ASTOR STREET DISTRICT

Six things we verified before the kitchen was installed

A pre-installation survey is about small distances. Each numbered crop is a close view of the room or the drawings, and the legend says what was checked there.

01

Close view of plumbing stub-outs coming through the plywood wall under the kitchen window

03

Close view of the kitchen ceiling with a lighting point and wiring before finishes

05

Detail of the as-built floor plan with connection points dimensioned along the wall

02

Close view of wall boxes set into the plywood backing wall of the kitchen

04

Close view of two arched transom openings in the kitchen wall

06

Detail of an as-built wall elevation showing the window and dimensioned connection points

LEGEND · VERIFIED BEFORE INSTALLATION

01

Plumbing positions

Each accessible plumbing point was measured where it comes through the wall.

02

Wall outlets

Accessible outlets were recorded by position for the installation team.

03

Lighting and HVAC points

Ceiling and wall points for lighting and HVAC were located and recorded.

04

Room dimensions

The room's exact dimensions were captured before the fit-out went in, openings included.

05

Floor plan

The plan ties every connection point to the walls with dimensions.

06

Sections and elevations

Drawn wall by wall to confirm that the systems and the cabinetry layout line up.

AREA

400 sq ft

SPACE

One kitchen

PROJECT DATES

Jun 13 to 19, 2025

SCOPE

Visible and accessible systems

WHY IT WAS SURVEYED

Cabinetry has no room for a pipe in the wrong place

The kitchen was documented as part of our ongoing work with a kitchen manufacturer from Florence. The aim was to validate MEP alignment before the cabinetry arrived, so the layout could be coordinated in advance and discrepancies caught before they showed up on site.

Each element was verified directly on site, and the documentation was limited to physically visible components so the data stays reliable. The CAD set was prepared for the millwork and installation teams, which reduced the time the manufacturer's team needed on site.

CLIENT NOTE

The Chicago kitchen before cabinetry, with plywood backing on the walls and taped drywall on the ceiling

THE ROOM AS SCANNED

Point cloud view of the Chicago kitchen seen from above

POINT CLOUD

Scan data of the Chicago kitchen loaded in Revit as a 3D view

SCAN DATA IN REVIT

“I truly appreciate the support and look forward to working with them again in the future.”

Andrea Farris, Project Manager at Officine Gullo

SCHEDULE OF DELIVERABLES

DELIVERED FOR THE ASTOR STREET KITCHEN

What the kitchen received, and what a larger building can order

Every ADS as-built begins with a LiDAR scan and ends with a set your architect, engineer or contractor can work from. Each item is its own line on the quote.

K-1

High-density LiDAR point cloud

The measured record of the room.

K-2

Interactive 360° digital twin

For remote visualization by the installation team.

K-3

Architectural as-built drawings

Floor plans, sections and elevations.

K-4

MEP verification package

For pre-installation coordination.

AVAILABLE FOR ANY CHICAGO BUILDING

A

Registered point cloud

The whole space in 3D, with a digital twin you can open in a browser.

B

2D CAD as-builts

Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF.

C

Revit model

LOD 200 to 300, for teams working in BIM.

D

MEP and structure

Recorded where the design needs them.

E

Site plans

The building in its lot, drawn from the same scan.

F

Area calculations

BOMA or REBNY figures, on request.

FILE FORMATS

DWG

PDF

RVT

IFC

NWC

E57

Matterport

HOW IT RUNS

A Chicago project, measured in four steps

01

02

03

04

Send the basics

The address, the approximate square footage and the deliverables you need.

Itemized quote

ADS has no Chicago office, so travel is quoted as its own line and not folded into the rate.

Scan day

A technician works through the building while it stays open. A tenant suite or a restaurant is usually a few hours on site, a multi-floor commercial building a day or more.

Drafting and review

The scans are registered into one point cloud and the CAD or Revit set is drafted from it. You review the drawings and request changes before final delivery.

PERMITS AND REVIEW

Where the drawings go for a Chicago permit

Your architect or engineer uses the set as the existing-conditions base for the submittal and handles the application. Our job is to make sure the existing conditions in it are right.

AUTHORITY

Chicago Department of Buildings

Issues building permits in the city. See the official department page.

ADDRESS

121 N. LaSalle St.

Room 900

REVIEWED UNDER

Chicago Construction Codes

SMALLER JOBS

Express Permit Program

Repair and improvement jobs can be filed online.

WHERE WE WORK

The Loop, River North, the West Loop, Lincoln Park, Lakeview, Hyde Park, Logan Square, Pilsen, Evanston, Oak Park, Naperville, Schaumburg and the rest of Cook and DuPage counties.

GET A QUOTE

Tell us about your Chicago property

To get a quote, send

1

Property address

2

Approximate square footage and number of floors

3

What it is for: tenant improvement, renovation, lease plan, insurance or facility records

4

Deliverables: point cloud, 2D CAD, Revit, MEP

5

Your deadline

Existing drawings, even old ones, help us scope faster.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

QUESTIONS

Chicago FAQ

Something else? Call 1-855-201-4043 and ask a specialist.

–

Q1

Is it worth bringing ADS to Chicago for one small room?

For a single small room, usually not. It makes sense when the building is large or irregular, when you need Revit or the point cloud itself, or when the existing drawings are decades old and cannot be trusted. The 400 sq ft Astor Street kitchen was a special case: the survey validated MEP alignment before cabinetry was installed.

–

Q2

What did the pre-installation kitchen survey record?

It recorded every accessible MEP outlet in the room, including lighting, HVAC and plumbing points, with its measured position. Sections and elevations were drawn to confirm alignment, and the CAD set was prepared for the millwork and installation teams. Only visible and accessible systems were documented.

–

Q3

Will the drawings work for a Chicago building permit?

Yes. Your architect or engineer uses the set as the existing-conditions base for the submittal to the Chicago Department of Buildings, which issues permits under the Chicago Construction Codes. Your design professional handles the application, and our job is to make sure the existing conditions in it are right.

–

Q4

Does the building have to close during the scan?

No. Scanning works around staff and customers, and after-hours scanning can be arranged where a space is too busy during the day. A tenant suite or a restaurant is usually a few hours on site.

–

Q5

Can you document a high-rise or a full multi-tenant floor plate?

Yes. The workflow is the same at any size: more scan positions, one registered point cloud, and a drawing set organized floor by floor. Multi-tenant commercial, residential buildings, retail and office suites make up most of our work.

–

Q6

What sets the price of a survey in Chicago?

Floor area, how much is inside the space, which deliverables you want and travel set the price. Point cloud plus 2D CAD is the lowest tier, and a Revit model adds drafting time. ADS has no Chicago office, so travel is quoted as its own line, and every quote is itemized so you can drop what you do not need.

ACROSS THE MIDWEST

More ADS work within reach of Chicago

Columbus, OH

Windsor at Easton Town Center, a 4,358 sq ft store scanned in 2025.

Basehor, KS

Daylight Coffee, a 1,750 sq ft corner coffee shop scanned in 2024 as a working cafe.

Auburn Hills, MI

Retail space on Baldwin Road, 6,336 sq ft.

Toronto, ON

MacMillan Theatre at the University of Toronto, 13,468 sq ft.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page