top of page

/Indian Creek, FL

INDIAN CREEK, FL · MIAMI-DADE COUNTY

As-Built Drawings in Indian Creek, FL

ADS provides LiDAR-based as-built drawings in Indian Creek, Florida. Our work here is one 540 sq ft luxury kitchen, surveyed in two phases for Officine Gullo: before installation in 2025, then after demolition in 2026 with a Leica RTC360. Each phase produced its own CAD set for the new kitchen's design and installation.

✓

Crew from our Brickell office

✓

The house stays occupied

✓

Scans phased to your renovation

Luxury kitchen in Indian Creek with a vaulted mosaic ceiling, wood cabinetry and a painted island, surveyed by ADS

KITCHEN · 540 SQ FT · PHASE 1, 2025

PHASED SURVEY

One kitchen, surveyed twice

A renovation changes what can be measured. ADS scanned this Indian Creek kitchen while it was still fitted out, and again once it had been cleared, so each stage of the work had drawings that matched the room as it stood.

1

×

2

→

Demolition

BETWEEN THE PHASES

The existing kitchen is taken out and the space cleared.

New kitchen

AFTER PHASE 2

Design and installation work from verified site conditions.

1

Phase 1: the kitchen as it stood

FEB 27 TO MAR 5, 2025

Section through the point cloud of the Indian Creek kitchen showing the vaulted ceiling above the cabinetry and island

Section cut through the Phase 1 point cloud: vault above, cabinetry and island below.

The 540 sq ft kitchen was documented as part of a long-term collaboration with a renowned Florentine manufacturer. It had vaulted ceilings, handcrafted mosaics and refined millwork, and a high-end redesign was planned. Each architectural and ornamental feature was recorded so the craftsmanship and geometry of the original room were kept on file.

MEASURED DETAILS, PHASE 1

01

Vaulted ceilings

Geometry documented to preserve spatial proportion and alignment.

02

Tile murals

Recorded with geometric and material accuracy.

03

Bespoke furniture

Ornamental detailing modeled to a precision a manufacturer can work from.

04

Elevations and sections

Interior drawings that bring out the room's classical symmetry and detailing.

PHASE 1 SET

Delivered

Point cloud

High-density point cloud data.

360° walkthrough

Interactive, for design coordination.

CAD as-builts

Floor plans, sections and elevations.

Measured drawings

For interior design and custom cabinetry planning.

Top-down point cloud of the kitchen with dimension lines and elevation markers overlaid

Dimensions over the point cloud

Angled view down into the colored point cloud of the kitchen showing both islands and the cabinetry

The room as a point cloud

As-built floor plan of the Indian Creek kitchen with dimensions and elevation markers

As-built floor plan

“

I truly appreciate the support and look forward to working with them again in the future.

Andrea Farris, Project Manager at Officine Gullo, after Phase 1

The fitted Indian Creek kitchen in Phase 1, with wood paneling, arched windows and a stone floor

2025 · FITTED OUT

×

The old kitchen comes out

Same 540 sq ft room. In Phase 2 the team captured what remained visible and accessible once the kitchen had been cleared.

Scan view of the cleared kitchen space in Phase 2, with the brick vaulted ceiling exposed and the cabinetry gone

2026 · CLEARED

2

Phase 2: the room after demolition

JUL 31 TO AUG 7, 2026

With the existing kitchen demolished, ADS returned for Phase 2 of the renovation and surveyed the cleared space with a Leica RTC360 laser scanner. The aim was to confirm dimensions and record the visible electrical, water and gas connections, so the new kitchen would be designed against real site conditions and not outdated drawings.

MEASURED DETAILS, PHASE 2

01

Field dimensions

Verified, to give reliable measurements for the new kitchen design.

02

Electrical connections

Visible connections recorded for installation coordination.

03

Water connections

Positions recorded as reference for the new installation.

04

Gas connections

Positions recorded as reference for the new installation.

05

Ceiling layout

Layout and coordination points documented on the reflected ceiling plan.

ADS technician checking a door frame against a tablet during the Phase 2 survey, with a magnified detail of a measured dimension

Field check of a door frame during Phase 2.

PHASE 2 SET

Delivered

Floor plan

Verified dimensions and existing spatial conditions.

Reflected ceiling plan

Ceiling layout and coordination points.

Sections

Dimensional references for design and installation planning.

CAD and PDF

Technical drawings for design coordination and renovation planning.

Phase 2 as-built floor plan sheet of the cleared kitchen space

Phase 2 floor plan sheet

Cutaway point cloud of the cleared kitchen showing the arched openings and vaulted ceiling

Cutaway of the Phase 2 point cloud

Plain 3D model of the cleared kitchen room with its arched opening

The empty room as a model

“

I had a great experience working with AS-BUILT DRAWING SERVICES throughout both phases of this project. The team was helpful and responsive, and I look forward to future projects.

Andrea Farris, Project Manager at Officine Gullo, after Phase 2

WHAT YOU CAN ORDER

Pick the stage, then pick the drawings

For a renovation in progress, ADS scans at the stage you specify. Each phase is quoted and delivered as its own drawing set, and a single kitchen or bathroom can be its own small job.

A

Before demolition

The room as it stands, finishes and fittings included.

B

After demolition

The cleared shell, with visible connections recorded.

C

After rough-in

The space once new services are roughed in.

→

The whole house or a single room, with a 360° digital twin you can open in a browser.

→

Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF.

→

LOD 200 to 300, for BIM-based design teams.

→

MEP and structural elements where they are scoped, such as utility positions.

→

Exterior elevations and site features for a facade or addition package.

→

Area calculations on request.

FILE FORMATS

DWG

PDF

RVT

IFC

NWC

E57

Matterport

LOCAL PERMITS AND REVIEW

Permits run through the village

Indian Creek is a village in Miami-Dade County, and permits for the island go through its own building department. Your architect or engineer submits the as-built set as the existing-conditions base of the permit application. These are the bodies and rules it answers to.

Where we work

Indian Creek, Bal Harbour, Surfside, Bay Harbor Islands, Miami Beach, North Bay Village, Sunny Isles Beach and Aventura.

VILLAGE OF INDIAN CREEK

BUILDING DEPARTMENT

Village of Indian Creek Building Department

Permits, plan review and inspections for the island. Applications are filed through the village's CommunityConnect portal. Telephone (305) 865-4121. See the official department page.

The village requires contractors to hold a Miami-Dade County municipal contractor's license.

High-Velocity Hurricane Zone

Florida Building Code provisions covering all of Miami-Dade and Broward. Window, door and roof replacements are reviewed to HVHZ standards, and exterior elevations are usually part of a facade or addition package.

Miami-Dade County building recertification

At 30 years, then every 10 years.

Indian Creek questions

Can you survey a single room instead of the whole house?

–

Yes. A single kitchen or bathroom can be scoped as its own small job, as both Indian Creek phases were. The same crew scans 6,000 sq ft houses, pool houses and guest houses as one registered point cloud when the whole estate is in scope.

At what stage of a renovation should the scan happen?

–

At the stage you specify: before demolition, after demolition, or after rough-in. Work can be phased to match a renovation sequence, with each phase delivered as its own drawing set.

Does the house have to be empty during the scan?

–

No. Residences are scanned with the household in, and staff and contractors can keep working in other rooms. ADS coordinates arrival with your household or estate manager.

Where do permit applications go on Indian Creek?

–

To the Village of Indian Creek Building Department. Applications are filed through the village's CommunityConnect portal, and the village requires contractors to hold a Miami-Dade County municipal contractor's license.

How do you measure marble, glass and mirror?

–

They are handled on site by adjusting the scanner per area. ADS scans with Leica RTC360 and BLK2GO scanners and the Matterport Pro3 and draws from the registered point cloud, so cabinet runs, ceiling heights, window openings and utility positions are measured, not assumed.

What sets the price of a survey on Indian Creek?

–

Floor area, the amount of detail to capture, the deliverables you choose and the Revit level of detail. A cleared room is fast. A finished house with millwork, stone and exposed services is slower to draft. Quotes are itemized, and no travel line applies inside Miami-Dade.

GET A QUOTE

Three steps to a quote for your property

Send the address, approximate square footage and the deliverables you want. We coordinate arrival with your household or estate manager. Existing drawings, even old ones, help us scope faster.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page