NORTH MIAMI, FL · MIAMI-DADE COUNTY
As-Built Drawings in North Miami, FL
ADS provides LiDAR-based as-built drawings in North Miami, Florida. Between May 23 and June 3, 2025, our crew documented a 15,000 sq ft commercial warehouse in the city's industrial corridor and delivered a point cloud, site, floor and ceiling plans, and CAD and PDF packages to guide space reconfiguration and logistics planning.
✓
Crew from our Brickell office
✓
Usually on site within 24 hours
✓
No travel charge in Miami-Dade

COMMERCIAL WAREHOUSE · 15,000 SQ FT · 2025

SPEC SHEET · NORTH MIAMI INDUSTRIAL CORRIDOR
Commercial warehouse in North Miami
AT A GLANCE
ADS
15,000 SQ FT
FLOOR AREA SURVEYED
2025
YEAR, MAY 23 TO JUN 3
4
DELIVERABLES IN THE PACKAGE
3
PLAN TYPES: SITE, FLOOR, CEILING
1.0 PROJECT DATA
SOURCE: ADS PROJECT PAGE
What the building needed
The warehouse sits in North Miami's industrial corridor, part of the Miami-Dade logistics network. The building needed full 3D documentation before its space was reconfigured and its logistics were planned.
ADS combined terrestrial LiDAR scanning with CAD-based modeling. The crew surveyed the interior geometry and the exterior site boundaries, then recorded spatial layouts, circulation routes and access zones as the base for operational upgrades and adaptive reuse.
PROJECT
Commercial Warehouse in North Miami
TYPE
Commercial warehouse
SIZE
15,000 sq ft
DATES
May 23 to Jun 3, 2025
CAPTURE
Terrestrial LiDAR scanning
OUTPUT
CAD and PDF, formatted for design, permitting and redevelopment
2.0 DELIVERABLES
4 ITEMS
01
Point cloud
High-density LiDAR point cloud data of the building and site.
02
Three plans
As-built site plan, floor plan and ceiling plan.
03
CAD and PDF
Documentation packages in both formats.
04
Circulation analysis
Spatial circulation and access analysis.
3.0 SITE CONDITIONS
3 ITEMS
CONDITION
Access coordination
WHAT WAS RECORDED
Vehicle entry points and turning radii.
RESULT
A measured base for optimizing logistics routes.
Ceiling system mapping
Lighting, HVAC and sprinkler layouts, plus docking areas on the coordinated site and ceiling plans.
Ceiling systems aligned precisely in the 2D documentation.
Site scale
Interior and exterior captured by phased scanning.
Full coverage and alignment across large areas.
4.0 CAPTURE RECORD

F-01
Exterior and site boundary

F-03
Scanner station at the stair

F-05
Registered point cloud
7 FRAMES

F-02
Main floor and mezzanine stair

F-04
Mezzanine level under the roof frames

F-06
Plan linework over the cloud

F-07
Building and site model
SCROLL SIDEWAYS →
5.0 CLIENT NOTE
FROM THE PROJECT PAGE
SIGNED
Alex Lasprilla
Interior Designer at MDNA Design
“Delivered with speed, precision, and total professionalism.”
“Their precise LiDAR data and detailed documentation always help us move forward with confidence.”
WHAT YOU CAN ORDER
Order options for a North Miami building
The fieldwork is always a LiDAR scan. The output is whatever your design or facilities team needs to work from, and each row below is a separate line on the quote.
6.0 ORDER OPTIONS
6 LINES
LINE
A
B
C
D
E
F
DELIVERABLE
WHAT IT COVERS
Registered point cloud
The building and site in 3D, with a 360° digital twin viewable in a browser.
2D CAD drawings
Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF.
Revit model
LOD 200 to 300, for BIM users.
MEP and structure
Lighting, HVAC, sprinklers and structural elements where they are in scope.
Site plan
Site boundaries, vehicle entry points and docking areas, as drawn for the warehouse.
Area calculations
BOMA or REBNY figures for leasing or sale.
SERVICE PAGE
FILE FORMATS
DWG
RVT
IFC
NWC
E57
Matterport
LOCAL PERMITS AND REVIEW
The numbers a North Miami owner has to know
Your architect or engineer files the application and performs any inspection. ADS supplies the measured existing conditions they start from.
7.0 CODE AND REVIEW
MIAMI-DADE COUNTY
City of North Miami Building Department
Permits and inspections under the Florida Building Code, including 30-year recertification inspections inside the city. See the official department page.
30 YEARS
First recertification
Miami-Dade County requires building recertification when a building reaches 30 years.
10 YEARS
Every recertification after
The cycle then repeats every 10 years.
3 STORIES
Milestone inspections
Florida Statute 553.899 applies to condo and co-op buildings three habitable stories or taller.
HVHZ
High-Velocity Hurricane Zone
Covers all of Miami-Dade and Broward. Windows, doors and roofing are reviewed to HVHZ standards, and current exterior elevations are often needed.
WHERE WE WORK
North Miami, North Miami Beach, Biscayne Park, Miami Shores, El Portal, the Upper Eastside and Morningside, Aventura, Golden Glades and Opa-locka.
8.0 NORTH MIAMI QUESTIONS
5 ANSWERS
–
Q1
Does a warehouse have to stop work during the scan?
No. Warehouses and shops are scanned around normal operations. The crew works bay by bay and around forklifts and deliveries, so receiving and shipping continue.
–
Q2
How accurate are warehouse as-built drawings?
They are drawn from the registered point cloud rather than from hand measurements. ADS uses Leica RTC360 and BLK2GO scanners and the Matterport Pro3. In a warehouse that means column grids, clear heights, dock positions and roof structure are recorded as they are, including anything the original drawings never showed.
–
Q3
Will the drawings work for a North Miami permit?
Yes. The set is prepared as the existing-conditions base your architect or engineer submits with a renovation, change-of-use or tenant improvement permit. Inside the city limits that goes to the City of North Miami Building Department, which reviews under the Florida Building Code.
–
Q4
Can you support a 30-year recertification in North Miami?
Yes. Miami-Dade requires building recertification at 30 years and every 10 years after, and the North Miami Building Department carries out those inspections inside the city. ADS supplies the current floor plans, elevations and point cloud your engineer starts from. The structural and electrical inspection itself is performed by your licensed engineer or architect.
–
Q5
What sets the price of a warehouse survey?
Floor area, how much is inside the space, the deliverables you order and the level of detail in any Revit model. An empty warehouse bay drafts faster than a fitted office. Point cloud and 2D CAD is the base tier, quotes are itemized, and there is no travel charge inside Miami-Dade.
STEP 1
Send the basics
Address, approximate square footage and the deliverables you need.
STEP 2
Get a quote
Itemized, one line per deliverable.
STEP 3
Scan day
A technician walks the building with the scanner. A warehouse keeps receiving and shipping.
STEP 4
Review and delivery
You review the set and ask for changes before final delivery.
9.0 REQUEST FOR QUOTE
ADS · MIAMI OFFICE
PHONE
MIAMI OFFICE
OFFICE
1110 Brickell Avenue, Miami. A crew can usually be on site within 24 hours.
HELPS US SCOPE
•
Number of floors
•
What the drawings are for
•
Existing drawings, even old ones
Nearby ADS project pages
2,740 sq ft · 2024
2,468 sq ft · 2024
2,718 sq ft · 2024
Other city pages
FL
FL
FL
FL
FL
Region
MEMBERSHIPS




Reviewed by Antonio Tomecich
Founder & Director, As-Built Drawing Services.
Last reviewed November 2026.