top of page

/Seattle, WA

SEATTLE, WA · WEST COAST REGION

Maurices storefront inside The Outlet Collection Seattle in Auburn, Washington, documented by ADS

MAURICES, AUBURN WA · 4,747 SQ FT · 2025

As-Built Drawings in Seattle, WA

ADS provides LiDAR-based as-built drawings for Seattle owners and architects. Our closest published project is in Auburn, Washington: between June 11 and July 14, 2025 we documented the 4,747 sq ft Maurices store at The Outlet Collection Seattle and delivered a point cloud, digital twin, 2D CAD set and LOD 300 Revit model for its rebranding.

✓

Travel shown as its own line

✓

You own every file

✓

Your building stays open

DOCUMENT

Rollout brief

STORE

Maurices

CENTRE

The Outlet Collection Seattle

CITY

Auburn, Washington

AREA

4,747 sq ft

ON RECORD

Jun 11 to Jul 14, 2025

Where this project is: the store is in Auburn, Washington, at The Outlet Collection Seattle, a short drive south of Seattle. It is the closest project to the city that ADS has published. A Seattle address is scanned and drawn the same way.

SPEC · WHAT WAS RECORDED

FRONT OF HOUSE

Sales floor

Fitting rooms

Cashier area

Emergency exits

BACK OF HOUSE

Electrical room

Storage

Security room

MAPPED IN DETAIL

Fixture and furniture layouts

Mechanical and electrical systems

Storefront geometry and façade

MODEL

Revit, LOD 300

1.0 Scope

A store planner needs the unit as it stands today

The Maurices store sits inside one of Washington State's major outlet destinations. Before a renovation and rebrand, its designers needed the complete layout: the selling space customers see and the technical rooms they do not.

ADS ran a full LiDAR reality capture of the unit. Fixtures and furniture were mapped so their dimensions can be relied on. The back-of-house was recorded to help with future equipment layout. The storefront was captured so new branding lines up with what is already there.

Sales floor of the Maurices store in Auburn, Washington, with mannequins and clothing fixtures

SALES FLOOR

Entrance to The Outlet Collection Seattle in Auburn, Washington

THE OUTLET COLLECTION SEATTLE, AUBURN

2.0 Package

What the store planner receives, layer by layer

Everything is built up from one scan. The point cloud is the base, and each layer above it is drafted or modeled from the one below.

04

03

02

01

04

360° digital twin

Matterport

An interactive walkthrough for remote design and planning. Check a condition from your desk.

03

RVT

IFC

NWC

The architectural model, with 3D views of the store and its storefront.

02

DWG

PDF

Floor plans, reflected ceiling plans, cross-sections and exterior elevations.

01

E57

Verified as-built spatial data. The measured record everything else is drawn from.

Scoped to your job, a Seattle package can also include MEP documentation, structural elements through a building survey, building site plans, and BOMA or REBNY area calculations on request.

3.0 Sheets

From the Auburn set

Three sheets and one view of the point cloud from the delivered package.

As-built first floor plan sheet of the Maurices store at The Outlet Collection Seattle

FIRST FLOOR PLAN

CAD

Reflected ceiling plan sheet of the Maurices store

REFLECTED CEILING PLAN

CAD

Elevation sheet of the Maurices store

ELEVATIONS

CAD

Plan view of the LiDAR point cloud of the Maurices store with fixtures visible and grid dimensions

Point cloud, plan view. Fixture positions are visible before a single line is drafted.

FROM

Ivette Ramos

ROLE

Architectural Designer at Alloi

RE

Maurices, The Outlet Collection Seattle

“Delivers on time with accuracy across diverse projects.”

Their team has supported us on a variety of assignments, always adapting to different requirements while ensuring accuracy and their responsiveness gave us confidence to move forward without delay.

THE TRAVEL LINE

When it makes sense to bring ADS to Seattle

ADS has no Seattle office. Travel appears as its own line on the quote and is not folded into the rate, so you can judge it for yourself.

YOUR JOB

One small room

A large or irregular building

You need a Revit model

You need the point cloud itself

OUR VIEW

MAYBE NOT

A local measure-and-draw service may be cheaper.

YES

A scan captures everything in one visit, and nobody goes back for a missed dimension.

YES

The model is built from the point cloud at LOD 200 to 300.

YES

It is the measured record, including out-of-square walls and uneven floors.

On scan day a technician walks the building with the scanner while it stays in use. A store or office the size of the Auburn Maurices takes hours, not days. Larger buildings are scheduled floor by floor. You review the drawings before the final files are issued.

PERMITS AND REVIEW

What Seattle reviewers and engineers will ask for

4.1

SDCI issues the permit

Building permits inside the city are reviewed and issued by the Seattle Department of Construction and Inspections. Your architect or engineer submits the ADS set as the existing-conditions base.

4.2

2021 Seattle Existing Building Code

Adopted in fall 2024, it sets the standard for an unreinforced masonry building to be recognized as retrofitted.

4.3

Unreinforced masonry

Seattle tracks more than 1,100 unreinforced masonry buildings. A mandatory retrofit ordinance is planned but not yet in force. An engineer planning that work needs real wall thicknesses, floor heights and opening sizes.

WHERE WE WORK

Downtown, Belltown, South Lake Union, Capitol Hill, Ballard, Fremont, Georgetown and SoDo, plus Bellevue, Redmond, Kirkland, Renton, Kent, Auburn, Tacoma and Everett.

QUESTIONS

Seattle FAQ

5.1

Is the Maurices project inside Seattle?

No. The store is in Auburn, Washington, at The Outlet Collection Seattle, a short drive south of the city. It is the closest project to Seattle that ADS has published.

5.2

Is it worth bringing ADS in from out of town?

Yes, when the building is large or irregular, when you need Revit, or when you need the point cloud itself. For one small room, a local measure-and-draw service may be cheaper. ADS has no Seattle office, so travel appears as its own line on the quote.

5.3

Does the store have to close while you scan?

No. The Auburn Maurices store was documented inside a working outlet mall. Tenants, staff and customers stay, and after-hours scanning can be arranged.

5.4

Where do the drawings go for a Seattle permit?

Your architect or engineer submits them to the Seattle Department of Construction and Inspections (SDCI) as the existing-conditions base. SDCI reviews and issues building permits inside the city.

5.5

Can you document an old brick building before a seismic retrofit?

Yes. The point cloud records sagging floors, leaning walls and irregular openings that a tape survey misses, all in one visit. It gives a structural engineer real wall thicknesses, floor heights and opening sizes.

5.6

What sets the price of a Seattle as-built?

Floor area, how much is inside the space, the deliverables you need and travel set the price. Point cloud plus 2D CAD is the lowest tier. A Revit model adds drafting time, and MEP or structural detail adds scan positions and modeling.

6.0 YOUR BRIEF

Start a brief for your Seattle building

Five details are enough for an itemized quote. Existing drawings help us scope faster, even old ones.

1

Property address

2

Approximate square footage and number of floors

3

What it is for: tenant improvement, renovation, seismic retrofit, lease plan, facility records

4

Deliverables: point cloud, 2D CAD, Revit, MEP

5

Your deadline

PREFER TO TALK?

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

SEE ALSO: WEST COAST CITY PAGES

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page