top of page

/Las Vegas, NV

LAS VEGAS, NV · THE STRIP AND CLARK COUNTY

As-Built Drawings in Las Vegas, NV

ADS provides LiDAR-based as-built drawings in Las Vegas, Nevada. In March 2022 our team scanned the 1,147 sq ft TAG Heuer boutique at The Shops at Crystals in one visit during mall hours, and delivered a point cloud, a 360° digital twin, a 2D CAD set and an LOD 300 Revit model.

TAG Heuer boutique storefront inside The Shops at Crystals in Las Vegas, documented by ADS

TAG HEUER, CRYSTALS · 1,147 SQ FT · MARCH 2022

✓

Scanned during store hours

✓

You own every file

✓

Every quote itemized

PROJECT FACTS

STORE

TAG Heuer, The Shops at Crystals

LOCATION

Las Vegas, Nevada

SIZE

1,147 sq ft, single level

ON RECORD

March 16 to 25, 2022

SITE TIME

One visit, during store hours

SCANNER

Matterport Pro3 LiDAR

MODEL

Revit, LOD 300

CAD SET

Floor plan, RCP, sections, storefront elevations

OUR WORK IN LAS VEGAS

A finished boutique, recorded before anything changed

TAG Heuer's store at The Shops at Crystals sits a few steps from the Strip. The interior had just been completed when ADS was brought in to scan it and create an exact as-built record for later design work and reference.

Luxury retail is hard on a scanner. Glass vitrines, mirrored columns and glossy panels throw reflections that usually corrupt a point cloud. The photos below show the finishes the crew had to measure through.

Back wall of the TAG Heuer boutique with brand sign, video screen and a run of lit watch vitrines

01

The back wall. Lit vitrines, a video screen and a gloss graphic panel in one elevation.

Freestanding watch display plinth on a red carpet inside the TAG Heuer boutique

02

Freestanding plinth, modeled as a fixture.

Floor-to-ceiling watch dial graphic on a gloss wall panel in the TAG Heuer boutique

03

Full-height gloss panel beside the sales floor.

Millwork drawn to the brand's proportions

Every piece of millwork and every fixture in the store was modeled in Revit at LOD 300, with attention to the proportions the brand specifies. That is what makes the model usable for the next branding update.

Glass vitrines and polished dark panels at the corner of the TAG Heuer boutique

04

Glass on glass. Scanner exposure was calibrated here to cut reflections.

Glazed corner display case at the entrance of the TAG Heuer boutique, seen from the mall

05

The glazed corner case at the mall entrance.

Long glass display case running through the middle of the TAG Heuer sales floor

06

The sales floor, end to end. All of it was captured in a single visit while the store traded.

FROM FINISH TO FILE

What the scan of that boutique became

Six frames from the delivered set. The point cloud comes first and every drawing is drafted from it, so dimensions are measured, not assumed.

Dollhouse view of the registered point cloud of the TAG Heuer boutique

1 · POINT CLOUD

The whole store as one registered LiDAR dataset.

As-built floor plan of the TAG Heuer boutique at The Shops at Crystals

3 · FLOOR PLAN

The whole single-level store on one sheet.

CAD storefront elevation of the TAG Heuer boutique with ceiling and display window heights

5 · STOREFRONT ELEVATION

Signage and display window heights from the mall floor.

Interior perspective generated from the scan data of the TAG Heuer boutique

2 · DIGITAL TWIN

A 360° record that designers can check from their desks.

As-built reflected ceiling plan of the TAG Heuer boutique

4 · REFLECTED CEILING PLAN

Ceilings and fixtures as built.

Revit model of the TAG Heuer boutique shown as a 3D massing view

6 · REVIT MODEL

LOD 300, with views set up for design reference.

SCROLL SIDEWAYS →

“Precise, professional, and attuned to luxury brand standards.”

We’ve collaborated on high-end retail projects like Fendi, TAG Heuer, and Rimowa across iconic locations like Bal Harbour Shops, Miami Design District, Brickell City Centre, Aventura Mall, and Lincoln Road. Their team is precise, professional, and understands the needs of architects and luxury brands.

VICTOR ZAMPARELLI · PRESIDENT AND OWNER, ZAMPARELLI ARCHITECTURAL GROUP (ZAG)

WHAT YOU CAN ORDER

Six lines, priced one by one

A Las Vegas project starts with a scan and ends with files your architect, engineer or contractor can build from. Choose the lines you need and leave the rest off the quote.

Point cloud with CAD is the lowest tier. Adding a Revit model adds drafting time.

Ref. 01

A registered point cloud of the whole space, plus a 360° digital twin you can walk through in a browser.

Ref. 02

2D CAD in AutoCAD and PDF: floor plans, reflected ceiling plans, elevations and sections.

Ref. 03

LOD 200 to 300 for teams that work in BIM. The Crystals boutique was modeled at LOD 300.

Ref. 04

Exposed ductwork, electrical runs and other services, recorded where you need them.

Ref. 05

Structural elements such as beams, and façade elevations like the Crystals storefront.

Ref. 06

Site and exterior drawings when the scope reaches past the lease line.

FILE FORMATS

DWG

PDF

RVT

IFC

NWC

E57

Matterport

PERMITS AND REVIEW

In Las Vegas the address picks the permit office

Your architect or engineer files the tenant improvement or renovation submittal. ADS supplies the existing-conditions base that goes into it. Both offices below now review under the 2024 International codes.

INSIDE CITY LIMITS

City of Las Vegas Building & Safety Division

Issues permits for addresses inside Las Vegas city limits.

OR

THE STRIP AND BEYOND

Clark County Building Department

Issues permits for the Strip, Paradise and the unincorporated areas of the county.

SEPARATE CITIES

Henderson and North Las Vegas issue their own permits.

WHERE WE WORK

The Strip and Paradise, Downtown, Summerlin, Henderson, North Las Vegas, Spring Valley, Enterprise and Boulder City.

QUESTIONS

Las Vegas FAQ

Does my store have to close for the scan?

No. The TAG Heuer boutique at The Shops at Crystals was scanned during mall hours. ADS works around customers and staff, and after-hours scanning can be arranged for resort and casino floors.

How do you scan glass, mirrors and polished finishes?

Scanner settings are adjusted on site, area by area. At the Crystals boutique the exposure was calibrated to cut reflections from the glass displays, so the point cloud did not have to be patched afterwards.

Does my permit go to the City of Las Vegas or to Clark County?

The address decides. The City of Las Vegas Building & Safety Division covers addresses inside city limits, and Clark County Building Department covers the Strip, Paradise and unincorporated areas. Henderson and North Las Vegas issue their own permits.

How long does a retail scan take?

A space the size of the Crystals boutique is scanned in hours, not days. That 1,147 sq ft store was captured in a single visit.

What sets the price of a Las Vegas as-built?

Floor area, how complex the space is, the deliverables you choose and travel set the price. A stripped shell costs less to document than a finished store with millwork and exposed MEP. Every quote is itemized so you can drop what you do not need.

Who owns the files?

You do. CAD, PDF, Revit and the point cloud are delivered to you and your consultants.

GET A QUOTE

Tell us about your Las Vegas space

Send the address, the approximate square footage and the deliverables you need. Existing drawings help us scope faster, even old ones.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

Prefer to talk or write? Call a specialist, or email info@asbuiltdrawingservices.com.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page