top of page

/Santa Fe Springs, CA

SANTA FE SPRINGS, CA · LOS ANGELES COUNTY

Exterior of the commercial building on John Street in Santa Fe Springs, documented by ADS

JOHN STREET COMMERCIAL BUILDING · 18,746 SQ FT · DOCUMENTED 2026

As-Built Drawings in Santa Fe Springs, CA

ADS provides as-built drawings and 3D laser scanning in Santa Fe Springs, California. In fall 2026 our team documented an 18,746 sq ft two-level commercial building, coordinating architecture and building systems in a Revit model with CAD and PDF drawings, MEP layouts and a Matterport walkthrough.

✓

Itemized quote, travel shown up front

✓

You own every file

✓

Your building stays in use

OUR WORK IN SANTA FE SPRINGS

One building, recorded layer by layer

The two-level building on John Street needed detailed as-built documentation to support space planning and permit drawings. Architectural features and building systems were documented together, backed by equipment records and reference photos.

Both levels had to line up exactly, floor to floor, so every level was captured and aligned in one survey.

PROJECT

Commercial Building on John Street

LOCATION

Santa Fe Springs, CA

SIZE

18,746 sq ft

DATES

Sep 30 to Oct 19, 2026

USE

Two-level commercial building

CAPTURE

Matterport

FORMATS

Revit, CAD, PDF, Matterport

FIVE LAYERS · SELECT A BAND TO OPEN IT

18,746 SQ FT · 2 LEVELS

A

Architecture

Plans, ceilings, sections and elevations of both levels

The base layer every other system is drawn against. It was built as a Revit model and issued as CAD drawings and PDF sheets.

3D cutaway of section A-A through the John Street building, showing a restroom and the open office beyond

Architectural floor plans of every level

SECTION A-A, CUT FROM THE REVIT MODEL

Reflected ceiling plans

Building sections and exterior elevations

Window and door schedules

Order it as 2D CAD as-builts: floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF. Or as a Revit model: LOD 200 to 300, built from the scan, for consultants who work in BIM.

E

Electrical

Power layout and panel details

The electrical layout was recorded in the Revit model and in AutoCAD, with panel details and equipment photos behind it.

Electrical layout in the Revit model and in AutoCAD

Electrical panel details

WHY IT WAS RECORDED

Space planning and permit drawings based on unverified dimensions could lead to rework and change orders. The as-built documentation gives the design team a reliable reference.

Equipment information and photos

Order it under MEP documentation: exposed mechanical, electrical and plumbing recorded where it is in scope.

M

Mechanical

Mechanical layout and equipment records

The mechanical layout sits in the same Revit model as the architecture, so equipment and ductwork can be read against the rooms and levels they serve.

Mechanical layout in the Revit model and in AutoCAD

Revit 3D view cut through both levels of the John Street building, with exterior ducts modelled on the end wall

BOTH LEVELS IN THE REVIT MODEL, WITH EXTERIOR DUCTWORK

Equipment information and photos

Order it under MEP documentation.

P

Plumbing

Plumbing and piping layout

The plumbing and piping layout was recorded in plan and in the model, with the restrooms modelled in Revit.

Plumbing and piping layout in the Revit model and in AutoCAD

Restrooms modelled in Revit

3D section of the John Street building with Revit-modelled restrooms beside the point cloud of the interior

REVIT-MODELLED RESTROOMS BESIDE THE INTERIOR POINT CLOUD

Order it under MEP documentation.

LS

Life safety

Sprinkler, alarm and fire-rating records

Fire protection and fire-rating information was gathered alongside the drawings, as records and photos.

Fire sprinkler and alarm records

Electrical panel details

HOW IT WAS DELIVERED

On John Street the life-safety items came as records and photos within the MEP and life safety documentation.

Fire-rated door and window label photos

360

Reference: Matterport 360° walkthrough

An interactive walkthrough of the surveyed space sits under every layer, for remote review and project coordination.

FROM SITE TO SHEET

The same walls as photo, scan, model and drawing

From the building as it stands, to the point cloud, to the sections and elevations a design team builds on. Most frames below show two states of the same view, one above the other.

Their Revit models and 3D virtual tours are accurate and ready to use.

We’ve worked with ADS on existing conditions surveys for several commercial projects across the US, and their deliverables have consistently been excellent.

Ivette Ramos · Architectural Designer, Alloi Architecture + Construction

Commercial building facade with painted brick base wall, continuous glass windows and overhanging soffit

1 · THE SITE

Painted brick base, ribbon windows and a deep overhang, as photographed.

Open office with workstations above, and the 3D scan point cloud of the same office space below

2 · THE SCAN

The open office above, and its point cloud below.

Point cloud of a building corner with a gated enclosure, above the matching Revit model

3 · SCAN TO MODEL

A corner with its gated enclosure: point cloud above, Revit below.

Facade with ribbon windows and brick base, above the matching Revit 3D model

4 · PHOTO TO MODEL

The ribbon-window facade and the model of it.

Brick facade with signage and landscaped walkway, above the matching Revit model of the entrance

5 · THE ENTRANCE

Signage wall and walkway, photographed and modelled.

Revit screens with ground floor plan, site plan and 3D building model, above building sections and a point cloud view

6 · IN REVIT

Ground floor plan, site plan and 3D model, then sections with room tags.

As-built cross sections and front, west and east exterior elevations of the commercial building

7 · THE DRAWINGS

Cross sections and exterior elevations drafted from the model.

SEVEN FRAMES · SCROLL SIDEWAYS

LOCAL RULES

Permits and review in Santa Fe Springs

Your architect or engineer files the application. Our job is to make sure the existing conditions in it are right.

Portal

City of Santa Fe Springs Building & Safety Division

Part of the Planning and Development Department. Since June 17, 2024, all plan checks and resubmittals go through the city’s online Plan Submittal Portal.

Zoning

Zoning clearance

Building & Safety forwards plans to Planning for zoning clearance where it applies. Projects that need discretionary review should contact Planning before submitting for plan check.

85%

Plan check fee

The city sets building plan check fees at 85% of the building permit fee.

WHERE WE WORK

Santa Fe Springs · Whittier · Norwalk · Downey · Pico Rivera · La Mirada · Cerritos

MORE WEST COAST CITY PAGES

QUESTIONS

Santa Fe Springs FAQ

Something else? Call 1-855-201-4043 and ask a specialist.

Do you document MEP and life-safety systems?

Yes. For the 18,746 sq ft Santa Fe Springs building, ADS delivered electrical, mechanical and plumbing layouts plus equipment information, electrical panel details, fire sprinkler and alarm records and fire-rated door and window label photos.

Where do the drawings go for a permit in Santa Fe Springs?

Your architect or engineer submits them as the existing-conditions base through the City of Santa Fe Springs Plan Submittal Portal, which has handled all plan checks since June 17, 2024.

Can you keep a two-level building aligned floor to floor?

Yes. Both levels of the John Street building were captured and aligned in one survey, so the plans stack without guesswork.

What does an as-built survey cost in Santa Fe Springs?

Floor area, the amount of building systems to record and the deliverables you choose set the price. Travel is shown as its own line on the quote. A Revit model with MEP layouts is the top of the range.

Does the building have to close while you scan?

No. Scanning is non-contact, so offices and tenants stay in use. Busy areas can be scanned after hours.

+1

GET A QUOTE · THE NEXT LAYER IS YOUR BUILDING

Tell us about your Santa Fe Springs property

Four details are enough for us to price it. Existing drawings help us scope faster, even old ones.

HOW A SANTA FE SPRINGS PROJECT RUNS

1

Send the basics

The address, approximate square footage and the deliverables you need.

2

Get an itemized quote

Each deliverable is its own line, and so is travel.

3

Scan day

Every level is captured in the same survey so the plans stack without guesswork.

4

Review and delivery

Drawings are drafted from the point cloud. You review the set before final delivery.

Itemized quote, one line per deliverable

Scanned by the team behind the John Street commercial building project

CAD, PDF, Revit and point cloud files are yours to keep

PREFER TO TALK?

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page