COLUMBUS, OH · FRANKLIN COUNTY

WINDSOR, EASTON TOWN CENTER · 4,358 SQ FT · SCANNED JULY 2025
As-Built Drawings in Columbus, OH
ADS provides LiDAR-based as-built drawings in Columbus, Ohio. In July 2025 our team scanned the 4,358 sq ft Windsor store at Easton Town Center, a second-floor corner unit being adapted for the new tenant. We delivered a point cloud, a digital twin, an LOD 300 Revit model and annotated AutoCAD and PDF sheets.
✓
Travel is its own line on the quote
✓
You own every file
✓
Your building stays in use
PROJECT BOARD · WINDSOR, EASTON TOWN CENTER
One store, three columns: capture, model, sheets
Every ADS project moves left to right. The cards below are what each stage held for the Windsor unit in Columbus, Ohio.
01 CAPTURE
5 cards

LOCATION
Second-floor corner unit
Large windows overlook the mall corridor at Easton Town Center.
DATES
July 11 to 17, 2025
4,358 sq ft, scanned while the space was being adapted for the new tenant.

SCOPE
Sales floor and back of house
Architecture and MEP documented across both, including the ceiling layout.
CHALLENGE
The double-height zone
A central double-height zone with an arch feature needed detailed capture of its suspended lighting and MEP layouts.
CHALLENGE
Facade and windows
Captured precisely, because visibility from the corridor matters for branding.
02 MODEL
4 cards

POINT CLOUD
High-resolution LiDAR point cloud
The scans registered into one measured record of the unit.
REVIT
LOD 300
A Revit model with online 3D visualization views.

CEILING AND MEP
Modeled from the scan
Ceiling systems, lighting fixtures and MEP components were modeled directly from scan data.

DIGITAL TWIN
360° digital twin
For design collaboration, stakeholder review and client presentations.
03 SHEETS
5 cards

SHEET
Ceiling plan
The ceiling grid and fixture positions, drawn from the model.
ANNOTATION
Customer zones, fitting rooms and storage
The annotated CAD drawings mark each area for the new store layout.

SHEET
Cross-sections
Two sections cut through the unit, drafted from the same model.
ZONING
Sales, fitting, back of house
Retail zoning was structured so the three kinds of space read separately.
ISSUED
AutoCAD drawings and PDF sheets
Annotated and coordinated with the model.
IR
“Delivers on time with accuracy across diverse projects.”
“Their team has supported us on a variety of assignments, always adapting to different requirements while ensuring accuracy and their responsiveness gave us confidence to move forward without delay.”
Ivette Ramos
Architectural Designer at Alloi
HOW IT RUNS
How your building moves across the board
Quote
Send the address, square footage and deliverables. We return an itemized quote.
Capture
A technician moves through the building with the scanner while it stays in use.
Model
The scans are registered into one point cloud.
Sheets
The CAD or Revit set is drafted from the point cloud.
Review
You review and comment on the drawings before final delivery.
WHAT YOU CAN ORDER
Tick the deliverables your project needs
With a 360° digital twin you can tour in a browser.
LOD 200 to 300, when your team works in BIM. The Easton model was LOD 300.
For standalone buildings and their lots.
Point cloud and 2D CAD is the base tier. A Revit model adds modeling hours. Every quote is itemized, so you can drop what you do not need.
Floor plans, reflected ceiling plans, elevations and sections in AutoCAD and PDF.
MEP or structural elements where the design needs them.
BOMA or REBNY area calculations are available on request.
FILE FORMATS
DWG
RVT
IFC
NWC
E57
Matterport
PERMITS AND REVIEW
In Columbus, the as-built is the base, not the submission
Plans submitted for review must carry the seal of the registered architect or engineer who prepared them. So the set changes hands once before it reaches the city.
STEP 1 · ADS
As-built set
Existing conditions, measured on site and drafted from the point cloud.
→
STEP 2 · YOUR DESIGN PROFESSIONAL
Sealed construction documents
Your architect or engineer draws on the as-built and seals the plans they prepare.
BZS Construction Industry Communication #04
→
STEP 3 · CITY OF COLUMBUS
Department of Building and Zoning Services
Issues building permits through its Citizen Access Portal.
111 North Front Street
WHERE WE WORK
Downtown and the Short North, German Village, Easton, Polaris, Dublin, Westerville, Grove City, Hilliard, Gahanna, Upper Arlington and the rest of Franklin County. ADS does not have an Ohio office, so travel appears as its own line in the quote.
NEW CARD · YOUR BUILDING
Request an itemized quote for a Columbus property
QUESTIONS
Columbus FAQ
Can you document a mall tenant space on a landlord fit-out schedule?
Yes. Easton Town Center is the example: a corner unit on an upper floor, scanned during the tenant transition, with the ceiling and MEP captured for the coordination drawings. Office suites, restaurants and standalone buildings follow the same workflow.
Does the store have to close during the scan?
No. We work around staff, shoppers and trades. The Windsor store at Easton was scanned while it was being adapted for the new tenant.
Something else? Call 1-855-201-4043 and ask a specialist.
Will the drawings work for a Columbus building permit?
Yes, as the existing-conditions base. Your architect or engineer uses the set for the submittal to the Columbus Department of Building and Zoning Services, which issues building permits through its Citizen Access Portal. Construction documents for plan review must be sealed by a registered design professional, so the as-built is the base your architect or engineer draws on and not the submission itself.
Is it worth bringing ADS to Columbus from out of town?
Not for one small room. It is when the building is big or irregular, when you need Revit or the point cloud itself, or when the existing drawings are old enough that nobody trusts them. One visit records everything, so there is no second trip for a missed dimension.
How accurate are the drawings?
What is on the sheet was measured on site. We scan with Leica RTC360 and BLK2GO scanners and the Matterport Pro3, and draft from the point cloud instead of from a tape.
What sets the price of a survey in Columbus?
Floor area, how much is inside the space, the deliverables you choose and travel decide the price. Point cloud and 2D CAD is the base tier, and a Revit model adds modeling hours. ADS does not have an Ohio office, so travel appears as its own line, and every quote is itemized so you can drop what you do not need.
OTHER BOARDS
More ADS city pages and Midwest work
MEMBERSHIPS




Reviewed by Antonio Tomecich
Founder & Director, As-Built Drawing Services.
Last reviewed November 2026.