top of page

/Basehor, KS

BASEHOR, KS · KANSAS CITY METRO

As-Built Drawings in Basehor, KS

ADS provides LiDAR-based as-built drawings in Basehor, Kansas. In May 2024 our team scanned Daylight Coffee on Pinehurst Drive, a 1,750 sq ft corner coffee shop, while it stayed open. We delivered a point cloud, a digital twin and AutoCAD floor, reflected ceiling, roof and elevation drawings with annotated PDF sheets.

✓

Travel quoted as its own line

✓

You own every file

✓

Your building stays open

Stone storefront of Daylight Coffee and Donuts in Basehor, Kansas, with copper awnings over the entrance

DAYLIGHT COFFEE · 1,750 SQ FT · SCANNED MAY 2024

1,750

SQUARE FEET

One working coffee shop on a corner lot

1

SITE VISIT

Finished within a few hours

4

PLAN TYPES

Floor, reflected ceiling, roof, elevations

“

The on-site visit was completed within just a few hours, and the final drawings were delivered exactly as promised.

“This fast and precise workflow ensured we had the documentation ready for our next steps without delay.”

JOHN BURGESS

ARCHITECTURAL DESIGNER

Interior of Daylight Coffee in Basehor with the service counter, seating and an exposed ceiling with ducts

THE PROJECT · MAY 2 TO 7, 2024

A corner coffee shop, scanned between orders

Daylight Coffee sits on a prominent corner lot with outdoor seating and on-site parking. Full-height storefront windows light the room, and the ceiling is open, with ducts, beams and hanging lights on show.

We recorded the walls, structural framing and partitions directly from the scan, and modeled the exposed ceiling with its ductwork, beams and suspended lighting. The layout is compact, so the CAD drawings define the customer, prep and service areas and show how the front and back zones fit together.

LIDAR POINT CLOUD 360° DIGITAL TWIN FLOOR PLAN REFLECTED CEILING PLAN ROOF PLAN ELEVATIONS AUTOCAD FILES ANNOTATED PDF SHEETS

Section cut through the point cloud of Daylight Coffee showing the roof framing and interior

SECTION THROUGH THE POINT CLOUD

As-built exterior elevations of the Daylight Coffee building drawn from the scan

AS-BUILT ELEVATIONS

HOW IT RUNS

Four steps, one visit

1

You send the basics

The address, rough square footage and the deliverables you want.

2

We reply with an itemized quote

There is no ADS office in Kansas, so travel is quoted as its own line.

3

One technician scans the building

It stays open, as the cafe did. A space that size is a morning's work.

4

You review the set

The scans are registered into a single point cloud and the drawings are drafted from it. You mark up the set before we issue the final files.

PERMITS AND REVIEW

City of Basehor Building & Safety Department

CITY HALL · 1600 N. 158TH STREET

Inside city limits, the department handles plan review, building permits and inspections. Permit applications and handouts are posted on the city's website.

Your architect or engineer uses the as-built set as the existing-conditions base for the application and handles the submittal. We make sure what the set shows is right.

WHERE WE WORK

BASEHOR. BONNER SPRINGS. LANSING. LEAVENWORTH. TONGANOXIE. KANSAS CITY (KS). AND THE REST OF THE KANSAS CITY METRO.

More ADS city pages: Chicago, IL · Columbus, OH · Amarillo, TX · All Midwest
Further afield we documented the 8,200 sq ft Brown Subaru dealership in Amarillo in 2024 and a 6,336 sq ft retail space in Auburn Hills, MI.

QUESTIONS

Basehor FAQ

Something else? Call 1-855-201-4043 and ask a specialist.

Does my shop have to close for the scan?

–

No. Daylight Coffee was scanned as a working shop, and we plan the route through a building around staff and customers.

How long does it take to scan a small commercial building?

–

A space the size of Daylight Coffee, 1,750 sq ft, is a morning's work for one technician. The cafe was a single visit of a few hours, and one visit captures the whole building.

What did ADS deliver for Daylight Coffee?

–

ADS delivered a point cloud, a digital twin, architectural as-built plans covering floor, reflected ceiling, roof and elevations, and AutoCAD files with annotated PDF sheets. The exposed ductwork, beams and hanging lights were modeled from the scan.

Is it worth bringing ADS to Basehor from out of town?

–

For one small room, probably not. It pays off when the building is large or oddly shaped, when you need Revit or the point cloud itself, or when the drawings you have are old enough to be wrong. There is no ADS office in Kansas, so travel is quoted as its own line.

Will the drawings work for a City of Basehor permit?

–

Yes. Your architect or engineer uses the set as the existing-conditions base for the application to the City of Basehor Building and Safety Department, which reviews plans and issues permits inside city limits. We make sure what the set shows is right, and your design professional handles the submittal.

What sets the price of a survey in Basehor?

–

The price follows floor area, how much is in the space, the deliverables you pick and travel. An empty shell is quicker to draw than a finished shop with millwork and exposed services. Point cloud and CAD is the entry tier, Revit adds modeling time, and quotes are itemized so you can remove anything you do not need.

GET A QUOTE

TELL US ABOUT YOUR BASEHOR BUILDING

Send the property address, the approximate square footage and number of floors, what the drawings are for, the deliverables and your deadline. Existing drawings, even old ones, help us scope faster.

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page