AUBURN HILLS, MI · OAKLAND COUNTY
As-Built Drawings in Auburn Hills, MI
ADS provides as-built drawings and 3D laser scanning in Auburn Hills, Michigan. In May 2026 our team documented a 6,336 sq ft retail unit at 4000 Baldwin Road, delivering floor and ceiling plans, exterior elevations, sections and a 3D Revit model in CAD, PDF and Revit formats.
✓
Itemized quote, travel shown up front
✓
You own every file
✓
Your building stays in use

BALDWIN ROAD RETAIL UNIT · 6,336 SQ FT · DOCUMENTED 2026
PHOTO
Left of every pair: the store as it stood on May 7, 2026, the day of the one site visit.
REVIT MODEL
Right of every pair: the same view in the 3D model, built in-house from the scan data.
OUR WORK IN AUBURN HILLS
Six views of one retail unit, each shown twice
Unit 729A at 4000 Baldwin Road is a single-level retail space of 6,336 sq ft. The design team needed a 3D model they could trust for store design and fixture layouts, not one traced from old drawings. The fair test of a model like that is to put it next to the photograph.
01
Storefront
Glass entrances and columns as photographed from the mall concourse. In the model, the same facade with its roll-up security grilles.
→

PHOTO

REVIT MODEL
02
Sales floor
Racks, mannequins and an open ceiling. Modelled empty, with the joists, the curved soffits and the column.
→

PHOTO

REVIT MODEL
03
Curved soffit
A large curved soffit over the wood racks. The model carries the curve, the columns, the counter and the fire extinguisher.
→

PHOTO

REVIT MODEL
Their Revit models and 3D virtual tours are accurate and ready to use.
We’ve worked with ADS on existing conditions surveys for several commercial projects across the US, and their deliverables have consistently been excellent.
The team is friendly, responsive, and always willing to go above and beyond to accommodate our needs, with consistently quick turnaround times.
Ivette Ramos
Architectural Designer, Alloi Architecture + Construction
04
Aisle and ceiling
Accessory displays under an open ceiling with track lights. In the model, the ceiling grid and soffits.
→

PHOTO

REVIT MODEL
05
Boutique room
Dresses on wall hooks, round racks and a crystal chandelier. The room modelled empty, with its ceiling grid and pendant lights.
→

PHOTO

REVIT MODEL
06
Service corridor
A narrow back corridor with stacked boxes, an exit sign and a fire extinguisher. The same corridor in the model, with its exit door.
→

PHOTO

REVIT MODEL
FROM THE MODEL TO THE SHEETS
The same pairing, on paper
ADS captured the existing conditions in one site visit and built the Revit model and the CAD and PDF drawings in-house, directly from the scan data. Store design and fixture layouts drawn on guessed dimensions would have needed rework during build-out.
A-1
Floor plan of the existing conditions
A-2
Reflected ceiling plan with ceiling heights, soffits and fixtures
A-3
Exterior elevations of every facade
A-4
Building sections
A-5
3D Revit model built from the scan
DATES
May 11 to 25, 2026
CAD, PDF, Revit
ESTIMATE
CAPTURE
Matterport
FORMATS
190 hours for the full set and model

PHOTO
↓

AS-BUILT PLAN
WHAT YOU CAN ORDER
Pair what you need with what to order
One scan, the deliverables your project calls for. Every quote is itemized, so you pay for the formats you need and nothing else.
YOU NEED
YOU ORDER
FILE FORMATS YOU RECEIVE
DWG
RVT
IFC
NWC
E57
Matterport
HOW IT RUNS
How an Auburn Hills project runs
Your steps are on the left and ours are on the right. On Baldwin Road the site visit was May 7, 2026, and the drawing set and model were produced May 11 to 25.
YOU
Send the basics
The address, approximate square footage and the deliverables you need.
YOU
Review and delivery
Drawings are drafted from the point cloud. You review the set before final delivery.
ADS
Get an itemized quote
Each deliverable is its own line, and so is travel.
ADS
Scan day
One visit captures the space. The Baldwin Road unit was scanned in a single site visit.
LOCAL RULES
Permits and review in Auburn Hills
Your architect or engineer files the application. Our job is to make sure the existing conditions in it are right. In Auburn Hills some permits are handled at the counter and others online.
IN PERSON
City of Auburn Hills Building Services Division
Part of the Community Development Department at 1827 N. Squirrel Road, Auburn Hills, MI 48326. Building permits are applied for in person at the department.
ONLINE
Trade and sign permits online
Electrical, mechanical, plumbing and sign permits, and inspection scheduling, go through the city’s BS&A Online service.
REVIEW TIME
The city says building permit processing usually takes two to four weeks, so accurate drawings at submission matter.
WHERE WE WORK
Auburn Hills · Rochester Hills · Pontiac · Troy · Lake Orion · Bloomfield Hills · Oakland County
MORE MIDWEST CITY PAGES
Chicago · Columbus · Basehor · All Midwest
QUESTIONS
Auburn Hills FAQ
Can you document a store inside a shopping center?
Yes. ADS documented unit 729A, a 6,336 sq ft retail space at 4000 Baldwin Road in Auburn Hills, in a single site visit on May 7, 2026, and delivered plans, elevations, sections and a 3D Revit model.
Where do the drawings go for a permit in Auburn Hills?
Your architect or engineer submits them as the existing-conditions base. Building permits are handled by the City of Auburn Hills Building Services Division at 1827 N. Squirrel Road, and are applied for in person.
How long does a retail unit take to document?
The Baldwin Road unit was scanned in one visit on May 7, 2026 and the drawing set and model were produced May 11 to 25. The full set with a 3D model was estimated at 190 hours.
What does an as-built survey cost in Auburn Hills?
Floor area, how much is inside the space and the deliverables you choose set the price. Travel is shown as its own line on the quote. Point cloud with 2D CAD is the base tier; a Revit model adds modelling time.
Does the store have to close while you scan?
No. Scanning is non-contact, so a store can stay in use. Busy floors can be scanned outside trading hours.
Something else? Call 1-855-201-4043 and ask a specialist.
GET A QUOTE
Tell us about your Auburn Hills property
Four details are enough for us to price it. Existing drawings help us scope faster, even old ones.

Itemized quote, one line per deliverable
Scanned by the team behind the Baldwin Road retail project
CAD, PDF, Revit and point cloud files are yours to keep
PREFER TO TALK?
MEMBERSHIPS




Reviewed by Antonio Tomecich
Founder & Director, As-Built Drawing Services.
Last reviewed November 2026.


