HALLANDALE BEACH, FL · BROWARD COUNTY
As-Built Drawings in Hallandale Beach, FL
ADS provides LiDAR-based as-built drawings in Hallandale Beach, Florida. In 2021 our team documented the 506,000 sq ft Gulfstream mall for SBLM Architects using ground laser scanning and drone mapping, and delivered a point cloud, CAD plans, Revit models and a Matterport walkthrough.
✓
Crews deploy from our Miami office
✓
You own every file
✓
Your building stays open

GULFSTREAM MALL · 506,000 SQ FT · DOCUMENTED 2021
506,000 sq ft
documented at the Gulfstream mall in Hallandale Beach
LiDAR + drone
ground laser scanning and aerial mapping in one dataset
5
deliverable types, from point cloud to Matterport walkthrough
Miami
office at 1110 Brickell Avenue, one county south
01
OUR WORK IN HALLANDALE BEACH
We documented Gulfstream's 506,000 sq ft mall
The Gulfstream mall combines retail, dining and office space in an open-air complex. A property that size cannot be measured by hand, so the crew combined terrestrial LiDAR scanning on the ground with drone mapping of the roofs and site.
The result is one dataset that architects, contractors and the leasing team all work from, for renovations, leasing and future expansion.
✓
High-density LiDAR point cloud of the complex
✓
Georeferenced orthophotos for property mapping
✓
Roof plans and site plans drawn from the aerial survey
✓
CAD and BIM outputs for design and construction teams
✓
Matterport walkthrough so leasing staff can review spaces remotely
PROJECT RECORD
ADS
PROJECT
LOCATION
SIZE
YEAR
USE
CAPTURE
FORMATS
ARCHITECT
Gulfstream Mall
Hallandale Beach, FL
506,000 sq ft
2021
Retail, dining and office, open-air
Terrestrial LiDAR and drone photogrammetry
Point cloud, CAD, BIM, orthophotos, Matterport
SBLM Architects
02
FROM SITE TO SHEET
What a scan turns into
The same three steps apply to a single shop unit or a half-million-square-foot complex: capture the building as it stands, build the model from the scan, and draft the drawings from the model.

1 · THE SITE
Roofs, courtyards and facades captured from the ground and the air.

2 · THE MODEL
Scans registered into a single 3D dataset of the whole complex.

3 · THE DRAWINGS
Plans and elevations drafted from the model, ready for design teams.

-BLOG-GULFSTREAM-PARK_MIAMI_edited_jp.jpg)

-BLOG-GULFSTREAM-PARK_MIAMI_edited_jp.jpg)
“
They captured over 400,000 SF of existing conditions at Gulfstream Park and turned it into clean, accurate Revit models, CAD plans, and interactive marketing assets.
The 360° floor plans and BOMA-calibrated charts have been a huge asset for both our leasing team and future design planning.
JC
James Cohen
VP, SBLM Architects · Gulfstream Park Mall, Hallandale Beach
03
WHAT YOU CAN ORDER
One scan, the deliverables your project calls for
Every quote is itemized, so you pay for the formats you need and nothing else.
FILE FORMATS YOU RECEIVE
DRAWINGS
DWG
BIM MODEL
RVT
IFC
NWC
POINT CLOUD
E57
WALKTHROUGH
Matterport
04
HOW IT RUNS
How a Hallandale Beach project runs
01
Send the basics
The address, approximate square footage and the deliverables you need.
02
Get an itemized quote
Each deliverable is its own line, so you can drop what you do not need.
03
Scan day
A crew comes up from Miami. The building stays open while we scan.
04
Review and delivery
Drawings are drafted from the point cloud. You review the set before final delivery.
05
LOCAL RULES
Permits and inspections in Hallandale Beach
Your architect or engineer files the application. Our job is to make sure the existing conditions in it are right.
WHERE WE WORK
Hallandale Beach
Golden Isles
Three Islands
Hollywood
Aventura
Sunny Isles Beach
Pembroke Park
Golden Beach
MORE SOUTH FLORIDA CITY PAGES
·
·
·
·
·
·
City of Hallandale Beach Building Division
Building permits and inspections inside the city. 400 South Federal Highway, Hallandale Beach, FL 33009.
Broward County Building Safety Inspection Program
Structural and electrical safety inspection for buildings 25 years or older, then every 10 years. One- and two-family homes are exempt.
Florida milestone inspections
Condo and co-op buildings three habitable stories or taller, under Florida Statute 553.899.
High-Velocity Hurricane Zone
The Florida Building Code's hurricane zone applies across Broward County, so window, door and roof work is reviewed to that standard.
06
QUESTIONS
Hallandale Beach FAQ
Something else? Call 1-855-201-4043 and ask a specialist.
Can you document a large retail or mixed-use property?
–
Yes. The Gulfstream mall is 506,000 sq ft, and we delivered it by pairing ground LiDAR with drone capture so roofs, facades and tenant spaces sit in one dataset. The same approach works for shopping centers, condo towers and office buildings.
Where do the drawings go for a permit in Hallandale Beach?
–
Your architect or engineer submits them as the existing-conditions base. Inside the city, permits go through the City of Hallandale Beach Building Division at 400 South Federal Highway.
My building is due for its safety inspection. Can you help?
–
We provide the current plans and point cloud the engineer needs to start. Broward County's Building Safety Inspection Program requires a structural and electrical safety inspection for buildings 25 years or older, and every 10 years after that. One- and two-family homes are exempt.
What does an as-built survey cost in Hallandale Beach?
–
Floor area, how much is inside the space and the deliverables you choose set the price. Point cloud with 2D CAD is the base tier; a Revit model adds modelling time. Every quote is itemized.
Does the building have to close while you scan?
–
No. Laser scanning is non-contact, so shops, offices and residences stay in use. Busy floors can be scanned after hours.
07
NEARBY WORK
More ADS projects near Hallandale Beach
GET A QUOTE
Tell us about your Hallandale Beach property
Four details are enough for us to price it. Existing drawings help us scope faster, even old ones.
✓
Itemized quote, one line per deliverable
✓
Scanned by the team behind the Gulfstream mall project
✓
CAD, PDF, Revit and point cloud files are yours to keep
PREFER TO TALK?
MEMBERSHIPS




Reviewed by Antonio Tomecich
Founder & Director, As-Built Drawing Services.
Last reviewed November 2026.


-12200-NE-14th-Ave-North-Miamil-DCMS.png)