top of page

/Dallas, TX

DALLAS, TX · DALLAS COUNTY

As-Built Drawings in Dallas, TX

ADS provides LiDAR-based as-built drawings in Dallas, Texas. In spring 2025 our team scanned two Dallas properties in the same two weeks: the 2,798 sq ft James Perse store at 3337 N Fitzhugh Ave and a 4,635 sq ft single-level home in Preston Hollow. Both received a point cloud and an LOD 300 Revit model.

Glass-walled wing of the Hillcrest single-level brick and wood home in Dallas, documented by ADS

HILLCREST HOME · 4,635 SQ FT · SPRING 2025

✓

Travel is one line on the quote

✓

You own every file

✓

Stores and homes stay in use

OUR WORK IN DALLAS

One store, one house, scanned days apart

ADS has two published Dallas projects, one retail and one residential, scanned in overlapping weeks in spring 2025. Choose a tab to see what was recorded and what was delivered for each.

A

Retail: James Perse

3337 N FITZHUGH AVE · 2,798 SQ FT

B

Residential: Hillcrest home

PRESTON HOLLOW · 4,635 SQ FT

Storefront glazing and stone pier of the retail building at 3337 N Fitzhugh Ave in Dallas

THE CORNER-LOT BUILDING BEFORE CONVERSION

RETAIL · APRIL 2025

A former pet store becoming a James Perse boutique

The building sits on a prime corner lot with strong street visibility and convenient parking. Turning it into a luxury boutique needed accurate documents for design and for permitting, so ADS ran a full architectural and MEP survey.

ADDRESS

SIZE

ON RECORD

SURVEY

MODEL

3337 N Fitzhugh Ave, Dallas

2,798 sq ft

April 2 to 8, 2025

Architecture, mechanical and electrical

Revit, LOD 300, with 3D views

As-built first floor plan of 3337 N Fitzhugh Ave, Dallas

FIRST FLOOR PLAN

As-built first floor reflected ceiling plan of 3337 N Fitzhugh Ave

REFLECTED CEILING PLAN

Exterior elevations of 3337 N Fitzhugh Ave drawn from the scan

EXTERIOR ELEVATIONS

Revit model view of the building and site at 3337 N Fitzhugh Ave

REVIT MODEL VIEW

01

Services first. Electrical panels, plumbing lines and fixture layouts were recorded so MEP coordination starts from mapped systems.

02

A change of use. Converting to retail meant layout updates in line with brand standards, drawn over measured walls.

03

A visible corner. The façade and signage were given particular attention in the plans.

Point cloud of 3337 N Fitzhugh Ave seen from above with the roof removed, showing the interior rooms

POINT CLOUD, ROOF REMOVED

04

Files for every desk. Point cloud, 360° digital twin, AutoCAD drawings, annotated PDF sheets, and Revit and SketchUp outputs.

“Has been instrumental to our global store openings for years”

They’ve helped us streamline planning and construction across multiple continents, making it easier to coordinate with architects, contractors, and our internal teams. Their speed and reliability are a major asset on every new build.

Mashawnta Armstrong, Project Manager, Development and Construction at James Perse

Point cloud view of the Hillcrest home in Dallas with its courtyard and surrounding trees

POINT CLOUD: HOUSE, COURTYARD AND TREES IN ONE DATASET

RESIDENTIAL · SPRING 2025

A single-level brick and wood home in Preston Hollow

The house combines granite, steel and custom woodwork behind expansive windows. ADS surveyed it inside and out to support renovation planning. The dataset includes the surrounding vegetation, the material textures and the building systems.

LOCATION

SIZE

ON RECORD

SURVEY

MODEL

Preston Hollow, Dallas

4,635 sq ft, single story

March 28 to April 4, 2025

Interior and exterior, with terrain

Revit, LOD 300, with IFC export

Living room of the Hillcrest home with brick walls, timber beams and floor-to-ceiling windows
Glazed lounge of the Hillcrest home with timber-framed windows on three sides
Pool terrace and brick rear elevation of the Hillcrest home
Revit model of the Hillcrest home with trees and site contours

REVIT MODEL WITH SITE

Line view of the Hillcrest home model sitting on its topography

MODEL ON ITS TOPOGRAPHY

01

Sloped garage terrain. Topography and level changes were modeled, not flattened.

“Exceeded expectations by delivering early with accuracy.”

Everything about the collaboration was excellent.

Wesley Tunnell, AIA, Senior Associate at M Gooden Design

02

Custom finishes. Granite, wood and exposed brickwork were documented in detail for renovation accuracy.

03

Systems in the model. Lighting, alarm and speaker systems are represented for future planning.

SIDE BY SIDE

Same workflow, different drawings

The two projects overlapped on the calendar and used the same method: scan, register one point cloud, draft from it. What changes is what gets recorded and how the set is used.

COMPARE

RETAIL

James Perse, N Fitzhugh Ave

RESIDENTIAL

Hillcrest home

BUILDING

SIZE

ON RECORD

CAPTURED

SYSTEMS MAPPED

MODEL

ALSO DELIVERED

USED FOR

Corner-lot retail property, formerly a pet store

2,798 sq ft

April 2 to 8, 2025

Architecture, mechanical and electrical systems

Electrical panels, plumbing lines, fixture layouts

LOD 300 Revit with 3D visualization views

Point cloud, 360° digital twin, AutoCAD drawings, annotated PDF sheets

Design, permitting and code compliance

Single-story residence in Preston Hollow

4,635 sq ft

March 28 to April 4, 2025

Interior, exterior, surrounding vegetation and terrain

Lighting, audio and security systems

LOD 300 Revit with IFC export and 3D views

High-resolution LiDAR point cloud

Renovation planning

WHAT YOU CAN ORDER

Order by building type, pay by line

For a store, office or commercial space

Start with 3D laser scanning: a registered point cloud of the whole property and a 360° digital twin you can open in a browser to check a condition without driving over.

Add as-built drawings in AutoCAD and PDF (floor plans, reflected ceiling plans, elevations and sections), and MEP documentation where electrical panels and plumbing lines need to be on the sheets, as they were on Fitzhugh.

BOMA or REBNY area calculations are available on request.

For a house

The workflow is the same. A residence gets more elevations and sections of the parts you plan to change, and the exterior and grounds can be included through building site plans.

Teams working in BIM can order a Revit model at LOD 200 to 300. Structural elements are documented where they are scoped, as part of a building survey.

Point cloud plus 2D CAD is the base tier. A Revit model adds modelling time. Every quote is itemized, so you can remove a line you do not need.

FILES YOU RECEIVE

DWG

PDF

RVT

IFC

NWC

E57

Matterport

PERMITS AND REVIEW

Where a Dallas permit is filed

Your design professional owns the submittal. Our job is to make sure the existing conditions in it are right.

IF THE PROPERTY IS

Inside the City of Dallas

→

Dallas Planning & Development

Building permits and plan review. The department was formed in June 2024 from Development Services and Planning & Urban Design. See the official department page.

IF THE PROPERTY IS

In unincorporated Dallas County

→

Department of Unincorporated Area Services

Development permits, handled with the Dallas County Fire Marshal's Office.

WHERE WE WORK

Uptown, Knox-Henderson, Downtown, Deep Ellum, the Design District, Oak Lawn, Preston Hollow, Lakewood, Oak Cliff, Plano, Frisco, Irving, Richardson, Garland and Fort Worth.

QUESTIONS

Dallas FAQ

STORE AND OFFICE OWNERS ASK

Does my store have to close while you scan?

No. Retail and office scans happen during business hours and ADS works around staff and customers. After-hours scanning can be arranged.

Which office reviews a Dallas tenant improvement or renovation?

Inside the city, permits go through Dallas Planning & Development. Property outside any city limits in Dallas County is permitted by the county's Department of Unincorporated Area Services. Your architect or engineer submits the ADS set as the existing-conditions base.

HOMEOWNERS ASK

Can you scan a single-family house as well as a store?

Yes. The Hillcrest home and the Fitzhugh store were scanned in the same two weeks with the same workflow. A residence gets more elevations and sections of the parts you plan to change.

Can I be home during the scan?

Yes. Homes are scanned with the owner present if they prefer, and an occupied house stays in use.

EVERYONE ASKS

Is it worth bringing ADS to Dallas from out of town?

For most projects, yes. Travel is a single line on the quote, the scan takes a day or less for a typical retail or residential job, and the drafting happens off site either way. ADS made the trip twice for Dallas clients in spring 2025.

How accurate are the drawings?

Every dimension on the sheet was measured, not estimated from a tape or an old drawing. ADS scans with Leica RTC360, Leica BLK2GO and Matterport Pro3 units and drafts from the registered point cloud.

GET A QUOTE

Store, office or house: tell us what you have

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page