top of page

/Cedar Hill, TX

CEDAR HILL, TX · SOUTHERN DALLAS COUNTY

As-Built Drawings in Cedar Hill, TX

ADS provides LiDAR-based as-built drawings in Cedar Hill, Texas. Between July 31 and August 5, 2024 our team surveyed the 8,000 sq ft Windsor Hillside Village retail unit near Joe Pool Lake ahead of a new store renovation, and delivered a point cloud, a 360° digital twin, annotated AutoCAD and PDF sheets and an LOD 300 Revit model.

✓

Scanned in one visit

✓

You own every file

✓

Your building stays in use

Storefront with striped awnings at the Windsor Hillside Village retail unit in Cedar Hill, Texas, documented by ADS

HILLSIDE VILLAGE UNIT · 8,000 SQ FT · 2024

UNIT SPEC CARD · AS-BUILT

RETAIL

As-built first floor plan of the Windsor Hillside Village retail unit in Cedar Hill

SHEET A-1.01

FIRST FLOOR PLAN

8,000

SQ FT SURVEYED

UNIT

Windsor Hillside Village

LOCATION

Cedar Hill, Texas, near Joe Pool Lake

SURVEYED

July 31 to August 5, 2024

PURPOSE

New store renovation

BEFORE

Occupied by fashion brands

INTERIOR

Open plan, exposed steel trusses, floating ceilings, suspended chandeliers

ZONES

Front of house and back of house

SCAN LIDAR

MODEL REVIT LOD 300

SHEETS AUTOCAD + PDF

TWIN 360°

OUR WORK IN CEDAR HILL

A leasing plan tells you the area. An as-built tells you what is in it.

The unit had housed fashion brands and was about to be renovated for a new store. Before fit-out and design development could start, it needed updated documentation of its open-plan interior, covering both the front and the back-of-house.

ADS scanned the whole unit and built one coordinated model that holds architecture, structure and MEP together. The zoning between front and back-of-house is defined in the drawings, which makes later planning quicker.

THE DRAWING SET

Sheets from the Hillside Village unit

AutoCAD drawings and PDF sheets, fully annotated for retail planning.

SHEET

TITLE

A-1.01

First floor plan

A-2.01

First floor reflected ceiling plan

A-3.01

Exterior elevations

A-3.02

Exterior elevations

A-4.01

Cross-sections

A-6.02

Revit view

Three cross-sections through the Windsor Hillside Village unit showing roof trusses and ceiling levels

A-4.01

Cross-sections: trusses, ceilings and levels

Reflected ceiling plan of the Windsor Hillside Village unit with ceiling panels and fixtures

A-2.01

Reflected ceiling plan

Revit view of the Windsor Hillside Village unit showing the steel roof trusses

A-6.02

Revit view: roof structure

Exterior elevations of the Windsor Hillside Village unit, sheet A-3.01

A-3.01

Exterior elevations

Exterior elevations of the Windsor Hillside Village unit including the storefront, sheet A-3.02

A-3.02

Exterior elevations

INSIDE THE UNIT

What the scanner had to reach

An open sales floor looks simple on a lease plan. Overhead it is not. This unit has exposed steel trusses, floating ceiling panels, suspended chandeliers and visible HVAC and lighting runs.

LiDAR scanning holds its accuracy across high and complex interior volumes, so those elements were measured from the floor and then modeled in Revit.

Open retail floor of the Windsor Hillside Village unit under exposed steel trusses and floating ceiling panels

EXPOSED TRUSSES AND FLOATING CEILINGS

Suspended chandeliers and columns across the polished floor of the Windsor Hillside Village unit

SUSPENDED CHANDELIERS

Storefront glazing of the Windsor Hillside Village unit seen from the sales floor

STOREFRONT, FROM INSIDE

“Delivers on time with accuracy across diverse projects.”

Their team has supported us on a variety of assignments, always adapting to different requirements while ensuring accuracy and their responsiveness gave us confidence to move forward without delay.

IVETTE RAMOS
ARCHITECTURAL DESIGNER AT ALLOI

WHAT YOU CAN ORDER

Climb as far up the ladder as your project needs

Every rung is drawn from the one below it. Stop at the point cloud, stop at 2D sheets, or go on to a Revit model. ADS models at LOD 200 to 300, and the Hillside Village unit went to the top rung.

On any rung you can add MEP documentation, structural elements through a building survey, or building site plans. BOMA and REBNY area calculations are available on request.

THIS UNIT

05

RVT

IFC

NWC

Architecture and MEP coordinated in one model. Trusses and ceiling assemblies were custom modeled at this level.

04

Revit model, LOD 200

RVT

The lower end of the range ADS models to.

03

DWG

PDF

Floor plans, reflected ceiling plans, elevations and sections.

02

360° digital twin

Matterport

Remote visualization for client and design teams.

01

E57

Verified spatial data for the whole unit. The base everything else stands on.

Get your Cedar Hill unit priced

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

PREFER TO TALK?

1

You send the address, approximate square footage and the deliverables you want.

2

We return an itemized quote. Any travel appears as one line.

3

A technician scans the building in one visit while it stays in use.

4

The set is drafted from one point cloud, and you review it before final delivery.

PERMITS AND REVIEW

285 Uptown Boulevard

City of Cedar Hill Building Inspections, at the Government Center. This office issues building permits in Cedar Hill.

Filed online, through one portal

All building permit applications, including plan uploads, are submitted through the EnerGov Customer Self Service portal. See the official Building Inspections page.

Your architect or engineer files the application. ADS supplies the existing-conditions base that goes into it.

WHERE WE WORK

Cedar Hill

Uptown Village

Joe Pool Lake area

DeSoto

Duncanville

Lancaster

Midlothian

Grand Prairie

QUESTIONS

Cedar Hill FAQ: general notes

Something else? Call 1-855-201-4043 and ask a specialist.

1.

Has ADS worked in Cedar Hill before?

Yes. ADS surveyed the 8,000 sq ft Windsor Hillside Village retail unit near Joe Pool Lake between July 31 and August 5, 2024, ahead of a new store renovation.

2.

Where do I submit drawings for a Cedar Hill building permit?

Applications go to City of Cedar Hill Building Inspections at the Government Center, 285 Uptown Boulevard. All building permit applications, including plan uploads, are submitted through the EnerGov Customer Self Service portal. Your architect or engineer files the application and ADS supplies the existing conditions.

4.

Does the unit have to be closed for the scan?

No. A technician scans the building in one visit while it stays in use. Evening or weekend sessions are available.

5.

What decides the price?

Square footage, interior complexity, the deliverables you pick and any travel decide the price. Point cloud and 2D CAD is the lowest tier, and a Revit model adds modeling hours. Quotes are itemized.

6.

Who owns the files?

You do. Point cloud, CAD, PDF and Revit files are delivered to you and whoever you name.

3.

Can you document exposed trusses and high ceilings?

Yes. At the Hillside Village unit, steel trusses and ceiling assemblies were custom modeled in Revit at LOD 300, and the exposed HVAC and lighting layouts were detailed for design integration.

OTHER TEXAS PROJECTS

A house, a store and a dealership

MORE SOUTHWEST CITY PAGES

Dallas is a short drive up US 67 from Cedar Hill. Between them, these three jobs cover most of what southern Dallas County owners bring us.

4,635 sq ft · 2025

2,798 sq ft · 2025

8,200 sq ft · 2024

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page