top of page

/Atlanta, GA

ATLANTA, GA · PHIPPS PLAZA

As-Built Drawings in Atlanta, GA

ADS produces as-built drawings in Atlanta, Georgia from LiDAR scans. In June 2022 our team scanned two adjacent suites at Phipps Plaza, 5,132 sq ft in total, before they were combined into the new Fendi store. We delivered a point cloud, a 360° digital twin, plans, ceiling plans, sections, elevations and an LOD 300 Revit model.

✓

Travel shown as its own quote line

✓

Scanned during trading hours

✓

You own every file

Fendi storefront at Phipps Plaza in Atlanta with marble portals either side of the entrance

FENDI, PHIPPS PLAZA · 5,132 SQ FT · 2022

PROJECT FILE

PROJECT

Fendi, Phipps Plaza

LOCATION

Atlanta, Georgia

TWO SUITES. ONE STORE.

AREA

5,132 sq ft across two adjacent suites

PROJECT DATES

June 21 to 28, 2022

SCANNER

Matterport Pro3, LiDAR

SCOPE

Phipps Plaza is a luxury shopping destination in Atlanta. The space that would house the new Fendi store was not one unit but two, side by side, and the design called for them to be combined.

ADS was commissioned to scan and document both suites. The record had to be good enough to carry a complete redesign: interiors, mechanical and electrical systems, and the storefront facing the mall.

Architectural interiors, mechanical and electrical systems, exterior mall facade

MODEL

LOD 300 Revit

Monochrome interior view of the 3D model of the Phipps Plaza suites showing ceilings, ducts and counters

3D MODEL · INTERIOR VIEW · LOD 300

“Their team is precise, professional, and understands the needs of architects and luxury brands.”

“We’ve collaborated on high-end retail projects like Fendi, TAG Heuer, and Rimowa across iconic locations like Bal Harbour Shops, Miami Design District, Brickell City Centre, Aventura Mall, and Lincoln Road.”

VICTOR ZAMPARELLI
PRESIDENT-OWNER AT ZAMPARELLI ARCHITECTURAL GROUP (ZAG)

MIRRORS, LIGHT AND TWO UNITS

Glass and mirrored finishes are common in luxury retail, and they make a store harder to scan than an empty shell. Here is what the Phipps Plaza job asked for and how the crew answered.

01

Reflective surfaces and uneven lighting

The capture strategy was adjusted on site to reduce scanning interference and improve clarity in the mirrored zones. The team still produced point cloud data complete enough for full modeling.

02

Two units, one model

The two separate suites were stitched precisely into one cohesive model, including the electrical, mechanical and structural systems that run through both.

03

High design expectations

The model was built to match the brand's standards and support architectural coordination, with views set up for design reference and a coordinated digital twin for design planning.

Color-coded point cloud of the Phipps Plaza suites with the floor plan linework overlaid in white

POINT CLOUD WITH THE PLAN OVERLAID

Point cloud of the two adjacent Phipps Plaza suites seen from above as one aligned dataset

BOTH SUITES, ALIGNED AS ONE DATASET

THE SET

What the Phipps Plaza scan produced, and what you can order for your own space in Atlanta.

01

POINT CLOUD

High-resolution LiDAR data of the whole space, from our 3D laser scanning service.

E57

02

DIGITAL TWIN

A 360° walkthrough you open in a browser to check conditions remotely.

Matterport

03

2D CAD SET

Floor plans, reflected ceiling plans, cross-sections and exterior elevations through as-built services.

DWG · PDF

04

REVIT MODEL

LOD 300 at Phipps Plaza. Our BIM services team models at LOD 200–300 for teams that work in BIM.

RVT · IFC · NWC

05

MEP AND STRUCTURE

Electrical, mechanical and structural systems, modeled throughout both suites here. See MEP documentation.

DWG · RVT

06

EXTERIOR AND AREA

The mall-facing facade was part of this scope. For freestanding properties we draw building site plans, and BOMA or REBNY area calculations come with a building survey on request.

DWG · PDF

FILE FORMATS

DWG

PDF

RVT

IFC

NWC

E57

Matterport

PROCESS

HOW AN ATLANTA PROJECT RUNS

1 You send the address, the approximate square footage and the deliverables you need.

2 We return an itemized quote.

3 On scan day a technician moves through the space with the scanner while the store, office or home stays in use. Small tenant spaces are captured in a single visit.

PERMITS AND REVIEW

WHO GETS THE DRAWINGS

INSIDE THE CITY LIMITS

City of Atlanta Office of Buildings, Department of City Planning

55 Trinity Avenue SW. Building permits inside the city limits. The set is prepared as the existing-conditions base for a renovation or tenant-improvement submittal by your design professional.

4 The individual scans are registered into one point cloud. The CAD drawings and any Revit model are drafted from it.

5 You review the set before final delivery.

ADS has no Atlanta office. The crew travels in for the scan day, and travel appears as its own line on the quote so you can see exactly what it costs. If you have old drawings, send them with the request. They help us scope the job faster even when they are out of date.

FULTON COUNTY

Fulton County Public Works, Planning, Zoning and Permitting

Covers only the unincorporated Fulton Industrial district, so most addresses in the metro fall under another city's building department.

WHERE WE WORK

DOWNTOWN / MIDTOWN / BUCKHEAD / WEST MIDTOWN / OLD FOURTH WARD / SANDY SPRINGS / BROOKHAVEN / DUNWOODY / DECATUR / MARIETTA / ALPHARETTA / FLOWERY BRANCH

QUESTIONS

ASKED IN ATLANTA

Do you scan mall and shopping-center tenants in Atlanta?

–

Yes. Fendi at Phipps Plaza and both Lucky Goat Coffee shops we documented north of the city were tenant spaces inside larger centers. We coordinate access with center management and scan around shoppers.

How do you handle mirrors and glass in a luxury store?

–

We adjust the scanner on site, area by area. At Phipps Plaza, mirrored surfaces and uneven lighting called for an adjusted capture strategy that reduced scanning interference in the mirrored zones.

Is it worth bringing ADS to Atlanta from out of town?

–

For most projects, yes. Travel is one line on the quote, and a space the size of the Phipps Plaza boutique is scanned in a single visit. The drawings are produced from the point cloud, so there are no return trips to pay for.

Does the store have to close for the scan?

–

No. Retail is scanned during trading hours, and offices and homes stay in use. After-hours scanning can be arranged where it suits you better.

Where are tenant-improvement drawings filed in Atlanta?

–

Inside the city limits, building permits go to the City of Atlanta Office of Buildings, part of the Department of City Planning, at 55 Trinity Avenue SW. Fulton County's own permit office covers only the unincorporated Fulton Industrial district, so most addresses in the metro fall under another city's building department. Your design professional submits our set as the existing-conditions base.

What sets the price of an as-built in Atlanta?

–

Floor area, how much is in the space, the deliverables you want and travel set the price. An empty shell is quicker to draw than a finished store with millwork and exposed ductwork. Point cloud plus 2D CAD is the base tier, and a Revit model adds modeling time. Each quote is itemized so you can remove what you do not need.

GET A QUOTE

YOUR SPACE, MEASURED

Send these five things and we will reply with an itemized quote.

Property address

Approximate square footage and number of floors

What it is for: tenant improvement, renovation, lease plan, insurance, facility records

Deliverables: point cloud, 2D CAD, Revit, MEP

Your deadline

Request an itemized quote

Send the property address, approximate square footage, the deliverables you need and your deadline. We reply with an itemized quote.

MEMBERSHIPS

ICSC member
Broward County Chamber of Commerce member
Chamber Approved A+
South Florida Women's Chamber of Commerce member

Reviewed by Antonio Tomecich

Founder & Director, As-Built Drawing Services.

Last reviewed November 2026.

bottom of page